甘薯新品种“龙薯9号”高产生理特性研究

甘薯新品种龙薯9号具有高产、抗病、耐旱等特点。试验结果表明,其高产机理在于光合面积大、光合能力强、T/R值进展合理、同化物分配到块根的比率高。     

抗氰烯菌酯假禾谷镰孢突变体的诱导及其生物学特性

为评估引起小麦茎基腐病的病原菌假禾谷镰孢Fusarium pseudograminearum对氰烯菌酯的抗性风险,对5株敏感菌株进行了室内药剂驯化,获得33株抗性突变体,突变频率为16.5%,其对氰烯菌酯的抗性水平范围为7.39～1 665.76倍,3株表现低抗,4株表现中抗,26株表现高抗;发现在myosin-5基因上存在11种抗性突变类型,其中217位的丝氨酸突变为亮氨酸(S217L)、420位的谷氨酸突变为赖氨酸(E420K)和135位的丙氨酸突变为苏氨酸(A135T)为主要突变类型,其比例分别为45.5%、15.2%和9.1%。S217L型抗性突变体的产孢量显著下降,菌丝生长速率和致病力与亲本菌株无显著差异。E420K型抗性突变体的菌丝生长速率和致病力显著下降,产孢量与亲本菌株无显著差异。A135T型抗性突变体的菌丝生长速率和产孢量与亲本菌株无显著差异。研究结果表明假禾谷镰孢在药剂选择压力下易形成氰烯菌酯的抗性群体,对氰烯菌酯存在中到高等的潜在抗性风险,其myosin-5的点突变与其对氰烯菌酯的抗性相关。     

基于ISSR分子标记的紫云英种质资源遗传多样性及结构分析

紫云英(Astragalus sinicus L.)是我国重要的稻田绿肥作物,为揭示不同地区种质资源遗传特征,本研究利用ISSR分子标记对77份紫云英种质资源进行了遗传多样性及结构分析。研究发现,77份供试紫云英种质资源遗传相似性系数为0.567 7～0.868 6,可划分为6个聚类。不同地区群体间分化系数为0.136 3,达到极显著水平(P<0.001),其中种群间变异占比13.9%,种群内变异占比86.1%。不同ISSR引物扩增信息鉴别紫云英资源的能力存在差异,构建了以P809第3,8,9,10,12,15扩增位点以及P886第1,3,5,9,10,11扩增位点为特征的指纹图谱,能有效区分77份供试紫云英资源。以资源所在省份为单元进行群体分析,供试紫云英资源遗传结构呈现分化特征,河南-安徽-江苏-上海资源遗传结构相似,构成北方亚群;四川-广西-湖南-江西资源相似,构成西南方亚群;福建种质资源则呈现混合型特征。本研究结果可为我国紫云英种质资源的科学利用及新品种选育提供依据。     

明胶用量及其与卡拉胶复配对奶冻品质的影响

[目的]奶冻在储存过程中常出现失水现象,为提高奶冻贮藏中的品质和保水性。[方法]以不同时间下奶冻质构特性、持水力、感官品质指标评价奶冻品质,探究明胶添加量以及明胶-卡拉胶复配对奶冻品质的影响。[结果]随明胶添加量增大,水析率、回复性和弹性逐渐减小,硬度和咀嚼度逐渐增大,感官品质先提升后下降,明胶添加量为1.8%时奶冻品质最好;在总胶体用量为1.8%情况下,卡拉胶比例增大,水析率和弹性变化幅度小,硬度先增大后减小再增大,咀嚼度先减小后增大,回复性减小,感官品质先降低后提升最后持续降低,卡拉胶比例为7%时其奶冻品质最好。[结论]1.8%的胶体添加量下添加7%的卡拉胶与明胶复配提高了奶冻的贮藏品质,胶体复配可改善奶冻贮藏中品质下降问题。     

弱光条件下桃光合作用的动态变化及品种差异分析

就日光温室桃树光合生理进行了详尽的研究,结果表明:1d中叶温与气温以14:00时较高。遮阴明显地降低了到达叶片表面的有效光合辐射、叶温与气温。桃叶片的光合速率日变化为双峰曲线,峰值大约出现在上午10:00与下午14:00时;不同品种弱光下的光合速率有明显的差异,以NJN较高,其次为五月火与麦香。遮阴降低了桃叶片的光合速率,以NJN光合速率降低的较少,说明NJN能适应设施栽培。气孔阻力与蒸腾速率则随着遮阴程度的增加而增加。桃中位叶的光合速率较幼叶高。     

凉山州高原粳稻开花习性研究

凉山州高原粳稻在自然环境中抽穗后3～4d开始开花，5～8d进入开花盛期，10～12d相继结束；1日内的开花时间主要集中在12：00～16：00；每朵颍花开花历时60～110min不等；闭花授粉粒和停止发育粒教因品种而异；水稻开花与颖壳内湿度、田间温度和生态区关系密切。     

不同花生品种侧枝发育动态与产量性状研究

花生一级侧枝发育具有不均衡性。第一、二对侧枝出现早，伸长快，其他一级侧枝出现晚，伸长慢。86036－26－1第一、二对侧枝发育相对较早，而其他一级侧枝发育较晚；海花1号和豫花1号第一、二对发育相对较晚，而其他一级发育较快；豫花7号和鲁花9号居中。海花1号一级侧枝及第一对侧枝的二级侧枝数最多，86036－26－1的一级侧枝数及第一对侧枝的二级侧枝数量少。在花针期之前第一对侧枝的伸长与主茎基本同步；花针期之后，第一对侧枝伸长速度超过主茎。86036－26－1的一级侧枝长及株高居首位。86036－26－1第一、二对侧枝饱果率，产量居第一，豫花7号居第二。海花1号虽然荚果数较多，但第一、二对侧枝孢果率较低，产量也较低；鲁花9号居中。     

Experimental Study on the Deformation Characteristics of Fine-Sandstone Under the Loading and Unloading Conditions

The deformation characteristics of the fine-sandstone is studied under the loading and unloading conditions at the three different deformation-rates and the two different stress-levels. The experimental results show that there is really the plastic-loop in the deformation curve for the loading deformation curve is different from the unloading deformation curve. But the plastic-loop is nearly unchangeable since the second circulate loading. The residual-deformation is be almost zero since the second circulate loading, and that the slope of the deformation curve increases as the deformation-rate increases, and that the residual-deformation increases as the stress-levels increases.     

Review on Synthesis Refrectory Nanoparticles

In general, the process of synthesis the refractory nanoparticles Is classified as solid state, liquid state and gaseity. The new progress and development in the study of refractory nanoparticles are investigated. The synthesis technology of the refrectory nanoparticle in liquid state is discussed mostly. The refrectory nanoparticles is synthesized by the liquid state. The characteristics and the structure of the refrectory nanoparticles have been studied in this paper.     

Load dynamic matching of supply and demand side based on the utilization of urban sewage heat energy

Flowing dynamic characteristics and its temperature dynamic characteristics of a three-level sewage pipe network in Chongqing were analyzed. A mall's building whole year load was simulated. In the adverse condition of wastewater flow, the market construction peak discharge heat was compared with the sewage heat load, the balance between the most adverse flow and the building demand was found. Explored supply and demand matching method between urban sewage and city building load in flow adverse condition to take full advantage of the urban sewage cold and hot resources. the composite system was adeptcd to make up the most unfavorable flow time of sewage average heat load and the construction load difference; it also puts forward principle of load sharing and control strategy aimed at compound system.