汽油机曲轴圆角和下沉量的研究

以某汽油机曲轴为载体,计算分析了曲轴的静态性能,并改变圆角半径和圆角下沉量的大小,分析对曲轴强度的影响,从而为圆角滚压工艺选取曲轴圆角参数奠定理论基础。     

2种离子固化剂改善黄土抗剪强度和抗渗性的研究

为了探讨CONAID和LUKANG 2种离子固化剂的固土性能及其影响因素,对不同固化剂掺量、养护龄期、压实度和含水率的固化黄土进行了直剪试验和渗透试验.研究结果表明:随着固化荆掺量、养护龄期和压实度增大,2种固化土的内摩擦角和黏聚力呈上升趋势,渗透系数呈下降趋势,且规律比较接近.其中LUKANG固化剂对黄土抗剪强度和抗渗性的改善效果优于CONAID固化荆.建议在施工过程中选用LUKANG固化剂,掺量宜取0.01%.为了达到更好的抗剪和抗渗效果,应尽量延长固化土的养护龄期,增加压实度.     

某汽车转向纵拉杆设计分析

转向纵拉杆是汽车转向传动机构中重要的零部件,通过转向纵拉杆受力分析,对转向纵拉杆的强度、稳定性进行了校核,提供了纵拉杆设计分析的参考.     

Differences in swimbladder volume between Baltic and Norwegian spring-spawning herring: Consequences for mean target strength

Fish swimbladders, where present, contribute most to the scattering of sound by fish, as measured by the target strength (TS). The volumes of the swimbladders of two different European stocks of Atlantic herring were compared to consider the effect on estimates of TS. Swimbladder volumes of Baltic and Norwegian spring-spawning herring (Clupea harengus) were measured, together with individual herring fat content. Swimbladder volumes were found to differ significantly between the two herring stocks. Baltic herring have a larger swimbladder volume, which is suggested to be associated with the fish's low fat content, which in turn may be linked to its specific energy budget and the low salinity of the Baltic Sea. A buoyancy model that considered the different salinity conditions and fat proportions was used to evaluate the observed differences in swimbladder volume. The swimbladder volume data were subsequently used to model the mean target strength as a function of depth and growth pattern. Backscattering of the swimbladder was modelled using the modal-series-based deformed-cylinder model (MSB-DCM), describing the swimbladder as a gas-filled, elongated prolate spheroid. The fish body component was modelled as a fluid-filled ellipsoid using the distorted wave Born approximation (DWBA). Modelling results support a different TS-to-size relationship for Baltic herring, with a stronger echo, due to the larger swimbladder. Depth- and length-dependent TS relationships based on the model results are suggested.     

Verification of mean volume backscattering strength obtained from acoustic Doppler current profiler by using sound scattering layer

ABSTRACT:   Acoustic Doppler current profilers (ADCPs) have recently been used to estimate the dynamic characteristics and biomass of sound scattering layers (SSLs) or swimming speed of fish schools and to analyze SSL spatial distribution or various behavior patterns. This paper shows that it is necessary to verify mean volume backscattering strength (MVBS, dB) values acquired from each beam for quantitative analysis of the spatial distribution or the biomass estimates of such specific targets as SSL or a fish school when using an ADCP. In this study, the SSL was selected to be a homogeneous density layer over a large area and two methods were used to verify the MVBS values from each beam of the ADCP. First, a mutual comparison among four beams was conducted after calculating MVBS from the measured echo intensity. Second, the MVBS values were verified using comparison between the calculated MVBS from the 153.6 kHz ADCP and MVBS from three frequencies of a well-calibrated scientific echosounder. Moreover, the dominant scatterers (euphausiids) were collected by a framed midwater trawl. From these samples, biological data were used to identify the different frequency characteristics between two systems, using a distorted-wave Born approximation (DWBA) theoretical backscattering model in order to assess the averaged target strength and target strength TS differences for the three frequencies.     

不同小麦品种(系)抗倒伏性状多样性分析

为了综合评价不同小麦材料的不同生育时期抗倒性,明确影响小麦倒伏的关键因素,以147份我国育成的主推小麦品种及新育成的小麦品种（系）为研究对象,在开花期、灌浆期和乳熟期测定其10个倒伏性相关性状,并利用主成分分析和聚类分析法对这些小麦材料抗倒性进行综合评价。结果表明,10个抗倒伏相关性状在不同基因型间、气候因素间及生育时期间均存在显著的变异;在不同生育时期,性状间的相关性基本一致,均表现为基部茎节壁厚度、实心度、茎秆强度对小麦的抗倒伏性具有一定的积极作用,株高、重心高度、基部茎节长度、髓腔直径具有一定的消极作用。主成分分析显示,茎秆强度是影响植株抗倒性的最关键性状。基于三个生育时期主成分的综合因子得分的聚类分析显示,有70份材料的综合抗倒性优良,其中部分新育成小麦材料抗倒性表现优异,可作为小麦强秆抗倒改良育种资源使用。     

原花色素对鸡胸肉肌原纤维蛋白凝胶特性影响

为探究一种新型天然食品添加剂研发的可行性,本研究向鸡胸肉肌原纤维蛋白中添加适量的原花色素,通过流变学、红外与拉曼检测、低场核磁和质构分析等方法,分析原花色素对凝胶形成时与随时间的变化的影响。结果表明:1)当原花色素添加量为0.05~0.20 g/kg时,蛋白凝胶有更好的保水性,并可更长时间保存更多的不易流动水和自由水;2)原花色素的添加提高了凝胶β折叠的浓度,使得凝胶具有更加稳定的二级结构;3)原花色素的添加提高了凝胶的粘弹性,使得凝胶具有紧实的质感,更大的密度和更致密的孔径;4)原花色素的添加提高了凝胶整体的抗氧化水平,使得凝胶在长时间存放中具有更稳定的生物学特性。综上,原花色素的添加可以有效提高肌原纤维蛋白的生物稳定性,在储存时可更好的保护其生物活性,可对未来的食品添加剂提供新思路。     

不同小麦品种茎秆抗倒性的研究

为了明确影响小麦抗倒伏性的主要因素,选用生产中应用较广泛的6个高产小麦品种,采用田间试验与实验室分析相结合的方法,对不同品种的抗倒伏性状进行研究。结果表明,百农矮抗58的倒伏指数较小,为0.432,与其他品种相比差异显著;百农矮抗58的茎秆机械强度大、茎秆基部第二节短粗、秆壁较厚、次生根数量较多、株高和重心高度较低。相关分析表明,倒伏指数与第二节关系密切,第二节机械强度越大、壁越厚、干重越大、地下部根量越多,倒伏指数就越小,茎秆抗倒性就越强;适当降低株高可以降低植株的重心高度,增强植株抗倒能力。逐步回归分析表明,影响茎秆抗倒性的直接因子为茎秆基部第二节机械强度、第二节干重、地下部根量及地上部鲜重,其中第二节机械强度对茎秆倒伏指数的直接作用最大,其直接通径系数为-0.775,可用第二节机械强度的大小评价品种茎秆抗倒性的强弱。     

W-OH砒砂岩固结体干湿循环特性及其细观机理

[目的]对W-OH砒砂岩固结体干湿循环特性及其细观机理进行研究,为实现W-OH固结改良砒砂岩及其耐久性研究提供科学依据。[方法]采用W-OH(亲水性聚氨酯材料)对砒砂岩进行固结处理,基于无侧限抗压试验、三轴抗压试验,研究其在干湿循环条件下的力学性能,并结合SEM,EDS和称重法对其干湿循环后样品微观结构、元素和质量损失进行分析,以获得其破坏机理。[结果]W-OH砒砂岩固结体的无侧限抗压强度、弹性模量和黏聚力在1～3次干湿循环后升高;在3～9次干湿循环后,固结体的力学强度降低;9次之后,剩下高黏结力的W-OH胶结体包裹于砒砂岩颗粒表面,力学强度趋于稳定。内摩擦角在1～9次干湿循环后上下波动,9次干湿循环后趋于稳定。采用碳元素分析和质量损失分析相结合的方法对土样中W-OH流失特性进行评价,发现土样在1～9次干湿循环中W-OH胶结体逐渐降低,并在9次干湿循环后达到稳定,这与上述宏观力学变化的规律相似,验证了破坏机理,为判断其长期特性提供理论依据。[结论]研究表明可将9次干湿循环后达到稳定的W-OH砒砂岩固结体的力学性质作为土体的长期力学特性。     

模拟自然降雨条件下植物根系增强边坡土体抗剪强度特征

该研究以位于青藏高原东北部黄土区的西宁盆地作为试验区,采用柠条锦鸡儿(Caragana korshinskii Kom.)、霸王(Zygophyllum xanthoxylon(Bunge)Maxim.)、垂穗披碱草(Elymus nutans Griseb.)、细茎冰草(Agropyron trachycaulum(Linn.)Gaertn.)的单播种植,以及柠条锦鸡儿分别与细茎冰草、垂穗披碱草混播种植等2种方式,开展了原位模拟降雨试验并采用直接剪切试验,系统分析了模拟降雨试验前后试验区边坡表层以下3个不同位置处复合体抗剪强度大小及其随深度变化规律。结果表明:模拟降雨试验前,由柠条锦鸡儿与细茎冰草、垂穗披碱草混播的边坡a层(0~20 cm)根-土复合体黏聚力分别为19.5、18.9 k Pa,均较相同条件下单播边坡a层复合体黏聚力大;混播种植边坡各层根-土复合体黏聚力均较模拟降雨试验后裸坡a层土体黏聚力大,其中柠条锦鸡儿与细茎冰草混播边坡、垂穗披碱草混播边坡模拟降雨试验后,a层复合体黏聚力分别较裸坡a层黏聚力的增幅为30.65%~56.45%;柠条锦鸡儿、霸王、垂穗披碱草、细茎冰草单播边坡b层复合体黏聚力增幅为4.17%~38.89%;柠条锦鸡儿分别与细茎冰草、垂穗披碱草混播边坡b层黏聚力增幅为29.17%~34.72%;边坡c层土体黏聚力增幅相对不及a层、b层显著,反映了草本起到浅层加筋作用,灌木则起到深部锚固作用。