锻热淬火20CrMnTi钢齿轮的工艺性能

２０ＣｒＭｎＴｉ钢齿轮毛坯经锻造余热淬火＋６０－６５０℃高温回火代替锻造后正火（原工艺），在后续加工中，齿轮表面粗糙度（本文测定Ｒｚ值）由原工艺的１５．４μｍ下降到４．９μｍ以下，刀具磨损量仅少量增加，解决了长期以来原工艺由于硬度低引起的粘刀和表面粗糙大的问题．高温碳－氮共渗的有效硬化层深度由０．７２ｍｍ增加到０．８ｍｍ，渗层组织也得到改善；同时还节约用电４７％．     

车齿原理与刀具设计的研究

In this paper, the principle to form curves and curved surfaces by gear turning is put forward. The designing principle and calculating formulas of the cutter with arbitrary teeth profile for gear turning is derived from the processing of the cylindrical     

DEGENERATIVE CHANGES IN THE VERTEBRAL COLUMN OF THE DOG

A group of 160 Beagles were studied radiographically to determine the pattern of degenerative changes within the vertebral column, especially involving the intervertebral discs. The normal radiographic appearance of both disc and surrounding vertebrae is described. Disc space narrowing and calcification of discal tissues provide radiographic patterns that assist in diagnosis and prognosis. Because of the older age of the dogs, severe degeneration of the endplates with marked instability between vertebral segments was seen.     

单自由度齿轮系统的周期运动和混沌运动

建立了综合考虑齿侧间隙、时变啮合刚度、综合啮合误差等因素下的定轴直齿圆柱轮副的单自由度非线性动力学模型,利用变步长Runge-Kutta法对单自由度运动微分方程进行数值求解.结合系统的分岔图、相图和Poincaré映射图,对系统随频率变化时的动力学特性进行分析.结果表明:齿轮啮合频率的变化导致系统发生连续倍周期分岔,从而产生混沌运动.另外,由于齿轮间隙非线性的影响,系统还存在擦切分岔等非光滑分岔现象.     

正交试验设计应用要点及其DPS实施

正交试验设计是进行多因素试验最简单、精确的方法,系统阐述了正交试验应用的重要知识点,包括指标、因素、水平的选择,因素间互作列及空列的合理设置,并详细介绍了如何利用DPS软件进行正交试验设计与数据分析,以期促进正交试验设计的合理使用。     

毛细管柱气相色谱法测定驱鸟剂中邻氨基苯甲酸甲酯

用色谱级无水乙醇超声萃取驱鸟剂中邻氨基苯甲酸甲酯,毛细管柱气相色谱法测定,试验结果表明,其相关系数为0.999 8,超声萃取效率达到87.8%以上,方法简单、准确、灵敏度高。     

一种采用阴离子交换柱快速纯化Taq DNA聚合酶的方法

通过37℃恒温振荡培养含有Taq DNA聚合酶基因的E.coli菌株,并用IPTG诱导该基因表达获得TaqDNA聚合酶蛋白,利用40％硫酸铵沉淀该蛋白后溶解于storage buffer中.此法获得的Taq DNA聚合酶带负电荷,因此采用阴离子交换柱纯化蛋白.试验结果表明,此法与传统的透析方法相比能快速地去除生物小分子杂质,同时去除透析方法无法除去的杂蛋白;既能保证Taq DNA聚合酶的生物学活性,同时能缩短纯化时间、提高Taq DNA聚合酶的纯度.以土壤微生物DNA、水稻cDNA为模板进行PCR扩增并对扩增产物进行测序,结果显示纯化后的Taq DNA聚合酶具有较高的扩增效率和保真性.     

HPLC Analysis of α-lactalbumin and β-lactoglobulin in Bovine Milk with C4 and C18 Column

Reversed-phase high-performance liquid chromatography (RP-HPLC) method with C4 column and C18 column for analyzing β-lactoglobulin and α-lactalbumin in bovine milk was developed and the performance and...     

《塔里木大学学报》2008～2010年度载文被引用分析

利用CNKI中国引文数据库的引文检索功能,统计了《塔里木大学学报》2008～2010年度载文被引用情况,通过数据进行分析,指出学报当前存在的主要问题,以期为发挥区域和高校优势,提高高校科技期刊办刊质量提供借鉴依据。     

The optimized Gabor window spectrum of gear fault diagnosis detection

There is a lot of non-stationary signals in gear vibration signals,which is analyzed by using Gabor spectrum. To resolve the problem of the choice of window,a method based on entropy is proposed to select the optimal Gabor window width,and the time-frequency resolution of Gabor transform is improved. Since the spectrum has its specific mechanism of crossing-item,the Gabor spectrum is calculated in the region of the key support area and the crossing-item is effectively removed,then the Gabor spectrum is used to analysis the time-frequency distribution of vibration signals of gear,and this method is compared with traditional analysis methods. The result shows that the Gabor spectrum can intuitively react abnormal gear and energy changes with time,and easily diagnose the gear fault.