炭化条件对竹原纤维炭孔隙结构的影响分析

为研究炭化竹原纤维的特性,进一步提升竹原纤维的使用性能,拓宽竹原纤维的应用领域,采用可控电炉制备了不同炭化温度和不同保温时间条件下的炭化竹原纤维,利用全自动比表面积及孔隙度分析仪测试了炭化竹原纤维的比表面积、比孔容及平均孔径,探讨了炭化条件对其性能的影响。结果表明：随炭化温度的升高和保温时间的延长,炭化竹原纤维的比表面积、比孔容和孔径分布先增大后减小,在较优的工艺条件下,炭化竹原纤维的比表面积和比孔容最大值分别可达819.35m2/g和0.7358cm3/g,平均孔径最小可达2.0836nm。     

Nutrient availability and corn growth in a poultry litter biochar‐amended loam soil in a greenhouse experiment

Nutrient‐rich biochar produced from animal wastes, such as poultry litter, may increase plant growth and nutrient uptake although the role of direct and indirect mechanisms, such as stimulation of the activity of mycorrhizal fungi and plant infection, remains unclear. The effects of poultry litter biochar in combination with fertilizer on mycorrhizal infection, soil nutrient availability and corn (Zea mays L.) growth were investigated by growing corn in a loam soil in a greenhouse with biochar (0, 5 and 10 Mg/ha) and nitrogen (N) and phosphorus (P) fertilizer (0, half and full rates). Biochar did not affect microbial biomass C or N, mycorrhizal infection, or alkaline phosphomonoesterase activities, but acid phosphomonoesterase activities, water‐soluble P, Mehlich‐3 Mg, plant height, aboveground and root biomass, and root diameter were greater with 10 Mg/ha than with no biochar. Root length, volume, root tips and surface area were greatest in the fully fertilized soil receiving 10 Mg/ha biochar compared to all other treatments. The 10 Mg/ha biochar application may have improved plant access to soil nutrients by promoting plant growth and root structural features, rather than by enhancing mycorrhizal infection rates.     

从天葵药材的解剖结构探讨其形态本质

天葵"块根"是由主根及下胚轴共同膨大形成,天葵药材的形态本质应为肉质直根。天葵肉质直根的增粗主要原因是由于木薄壁细胞产生三生形成层,形成大量三生维管束;以及次生韧皮部和次生木质部中薄壁细胞的不断增加。     

Excel应用于方差分析的实训教学探究

针对国内应用型本科湖南文理学院院校概率统计课程的实训教学越来越多地注重Excel作为初学者操作平台的现状,就非平衡数据和嵌套结构的数据在Excel中实现方差分析的过程进行探究。突出以组内矫正数为主线整理数据后简化平方和分解公式的理念,使得Excel中进行方差分析时,数据整理流程完全格式化,平方和的分解步骤更为简洁,自由度分解、F检验等步骤不再繁琐,为非统计专业本科阶段借助Excel电子表格率先实现概率统计课程实训教学的宽口径模式提供借鉴。     

不同用量松土促根剂对冬小麦产量的影响

研究了Agri-Star松土促根剂在冬小麦上的合理用量,为该产品大面积推广提供依据.结果表明,在正常旋耕施肥(配方肥750 kg/hm2+旋耕12 cm,CK2)的基础上,获得最高产量的松土促根剂施用量为18.13 kg/hm2,最佳经济施用量为16.87 kg/hm2,施用松土促根剂13.5 kg/hm2处理较CK2平均增产26.18％.施Agri-Star松土促根剂是小麦生产上值得推广的新技术.     

基于合成法的定位误差的分析与计算

为保证机床夹具设计的可靠性,定位误差的计算是机床夹具设计过程中必不可少的重要环节之一。为此从定位误差的产生机理出发,介绍了定位误差的概念、产生原因,并给出计算公式,有助于快速实现定位误差的求解。     

影响静止中心(QC)细胞分裂的EMS突变体库构建与筛选分析

采用正向遗传学方法,以转基因拟南芥(Arabidopsis)SCRGVG UAS∶∶axr3-1为材料来进行EMS诱变。通过外源施加激素DEX诱导GVG/UAS系统启动axr3-1在静止中心表达,导致静止中心发生分裂。通过构建EMS突变体库,得到2 616份M2代候选突变体家系。对M2代种子进行初筛得到43个候选家系。经过复筛,获得22个具有稳定表型的突变体家系。根据表型相似性将候选家系分为5类,共6组。将候选家系进行组内杂交,根据F1代植株表型是否与亲本相似,获得2对等位突变体。这些突变体将为研究干细胞小生境的调控机制研究提供新材料。     

浅析城市中心广场道路铺装材料生态性设计

道路铺装设计是城市中心广场设计中的重要组成部分,现越来越受到人们的重视。为创造出生态性的城市中心广场道路铺装景观,在分析城市中心广场道路铺装材料在生态性设计方面存在问题的基础上,提出城市中心广场道路铺装材料生态性设计的原则及要点,即在不影响正常使用的前提下尽量实现生态性要求,多应用透水、透气的环保铺地材料,遵循经济节约的原则,循环利用部分铺装材料,并以合肥万达广场道路为例,详细叙述了其道路铺装材料的基本形式和存在问题,进一步提出具体改造方案。     

重庆南温泉洗浴废水用作植物灌溉水的可行性研究

重庆市温泉资源丰富,温泉洗浴废水运用于绿地灌溉可以节约成本,缓解城市的水危机。温泉洗浴废水对植物生长有正负两方面的影响,与植物的种类,温泉洗浴废水的水质等因素有关。实验以重庆市常见的两种绿地植物——冷水花木春菊为研究对象,对温泉洗浴废水中影响植物生长的pH、固体悬浮物、高锰酸钾,总溶解性固体4个常见指标进行了浓度值对比实验。运用对相对电导率拟合Logistic方程求半致死浓度值的方法,确定绿地植物所能耐受的上限阀值。以此为基础对温泉废水进行相关处理,使温泉废水既可以达到灌溉绿地的水质标准,又能最大限度地降低废水处理成本,从而充分利用水资源。     

Effect of the Substrates on the Production of Engrafted Vine Cuttings in Heated Greenhouses

This article highlights the results of a long-term research project on the production of grape stalks engrafted by the desk method. The integrated impact of rootstock varieties, modes of stratification, and different substrates on vegetating vine cuttings, raised in heated greenhouses, and the capacity of their acclimatization after planting was studied. The results of the research show that rootstock variety and modes of stratification influence the output of engrafted vegetating cuttings of vines grown in pots using various substrates. In particular, the engrafted cuttings of variety Rkatsiteli produced on two rootstocks, 5 BB and 101-14, passed stratification (a) in sawdust with local electroheating, (b) on the water with its periodic change, and (c) in the layer of perlite. After preplanting preparations they were planted in pots with six different substrates: (1) soil (control); (2) perlite; (3) sawdust; (4) rice husk + soil + sand (1:1:1); (5) peat + soil + sand (1:1:1); and (6) mold + soil + sand (1:1:1). The cuttings were grown with a covered root system in a heated greenhouse for 35–40 days. Forty-day-old vegetating cuttings, after hardening, were planted into the open ground. Specialties were established during the root and shoot formation on vegetating nursery plant grafts during the rooting period. Optimal substrates for growing engrafted cuttings with a covered root system in heated greenhouses for each rootstock and stratification mode were determined.