Slab Defect Diagnosis and Predicting System Based on Rough Set Theory

In accordance with the special characteristics of state medium-sized construction enterprises and their reform objects of "having a free hand and enlivening", the suitable objective model, the stock cooperative system for state medium-sized construction enterprises has been put forward in this paper by analyzing the system mechanism of stock cooperative system enterprises. Then the causes for it were expounded.     

A CALCULATION OF THE ECCENTRICALLY LOADED BRICKWORK WITH BIAXIAL BENDING IN TERMS OF ULTIMATE STRENGTH DESIGN METHOD

This paper suggests a calculation formula for eccentrically loaded brickwork or column with biaxial bending in terms of ultimate strength design method. The coefficients of the formula, are compiled as design charts so that the formula can be directly used for design of this kind of structural members.     

The Control Strategy for the Excitation System of Asynchronized Turbogenerators

In this paper, the excitation principle and operating characteristics ofasynchronized turbogenerators are analyzed,and adaptive tracing iterative control strategy based on state identification is proposed. In order to apply this control scheme to practice engineering, some primary elements are analyzed and presented for constituting dual-channel automatic excitation control system of asynchronized turbogenerators. Finally, the paper presents the principle structure charts about excitation control system of asynchroized turbogenerators.     

An EOQ Model at Random when Average Demand Is a Linear Increasing Function

For certain types of inventory, the ordering cycle and demand may be random variants, which satisfy certain types distribution. The classical EOQ model usually neglects the fact. Based on the constant demand, under the hypothesis that the ordering cycle is a random variant which satisfies exponent distribution, average demand is a linear increasing function, this paper considers the effects of the time-value of capital and inflation on replenishment strategy of inventory system. Loosening the condition of basic economic order quantity model under deterministic state, the total cost function of the model is provided. The optimum order quantity and cycle are obtained. The application range of EOQ model under the constant demand is widened. The theoretical evidence is provided for the inventory system to make management decision.     

活塞组机械疲劳试验的有限元仿真

对某铝合金活塞在机械疲劳试验机上做的疲劳试验进行有限元分析,为活塞的改进设计提供依据。采用装有活塞销的三维整体活塞有限元模型,应用接触单元模拟实际情况,对活塞在交变机械载荷作用下的应力和应变进行了计算,找出了危险点部位,计算结果与试验吻合。     

起重机吊臂有限元模态分析

利用ANSYS软件对起重机吊臂进行了有限元模态分析,得出了各阶模态下吊臂的固有频率和振型,找到了吊臂振动中的危险区域,为产品设计和改进提供了理论依据。     

回转筒内秸秆碎料回转周期和料层完全混合时间研究

基于试验和理论分析,研究了回转筒型固态发酵罐内秸秆粉碎料的料床回转周期,建立了数学模型,其计算准确度达95%以上;结合图像分析法和料床回转周期,发现筒内上下料层完全混合时料层所转圈数与筒体转速关系不大,与筒内料体积填充率呈线性关系。由此回归并推导出只需知道筒内料体积填充率和筒体转速,便可预测上下料层完全混合的公式,其计算准确度达90%以上。提出了以上研究成果在工业级发酵罐中应用的方法。     

混合状态下散体的传热过程研究

根据热力学第一定律，利用集中参数法，导出了混合状态下散体非稳态传热方程：Ｔ－Ｔ０Ｔ∞－Ｔ０＝１－ｅ－τ上述理论与实验结果相当吻合，是研究散体传热理论问题的重要参考     

基于PCA-GA-SVM的甘蔗收获机运行状态识别

由于甘蔗收获机在收获过程中智能化水平较低,依靠人工操作很容易对甘蔗收获机的运行状态产生误判,从而造成物流通道堵塞、能源浪费、收割效率低。针对这些问题,提出一种基于主成分分析(PCA)、遗传算法(GA)和支持向量机(SVM)状态识别模型。首先,通过实地采集甘蔗收获机刀盘轴、行走轴、切段轴和风机轴扭矩和行驶速度特征信息,然后通过PCA进行数据降维,最后利用GA优化参数C、γ,使用每个特性信息来训练SVM,对甘蔗收获机运行状态进行分类。结果表明:PCA-GA-SVM状态识别模型对甘蔗收获机运行状态的识别准确率为93.75%,建模时间为3.688 s,与SVM(81.25%,9.487 s)、PCA-SVM(87.5%,5.817 s)和GA-SVM(90%,8.969 s)进行对比,该模型具有最高准确识别率和最快建模速度,具有较大的应用价值。