弹簧预紧力可调式振动深松机设计与试验

为了减小深松机的耕作阻力和拖拉机的动力消耗,增强深松机对不同类型土壤的适用性,设计了弹簧预紧力可调式自激振动深松机。在机具工作过程中,通过自激振动单元的振动作用,可有效减小深松机的牵引阻力;通过弹簧预紧力调节机构可改变弹簧的预紧力,以适应不同物理特性的土壤,获得理想的深松效果。田间试验表明在保证耕深的前提下,合适的弹簧预紧力可有效减小机具的耕作阻力。为了测试该深松机的减阻性能,设计了2.5、3.2、4.0km/h 3种作业速度和250、300、350mm 3种深松深度,进行了两因素三水平的全因素试验,试验结果表明：在不同作业速度与深松深度下,与非振动深松机相比,该深松机均能有效减小牵引阻力,减阻比为10.30%~22.65%;对不同作业速度和深松深度下的振动深松牵引阻力和非振动牵引阻力进行了方差分析。结果表明作业速度、耕作深度和机具类型对深公机工作阻力均有显著性影响,在不同作业速度下,由于自激振动单元的减阻作用,随着耕作深度的增加,振动深松牵引阻力增加速度小于非振动深松。     

Optimizing the lighting regime for Alstroemeria with respect to photoperiod and fluence rates

The Alstroemeria cultivars Diamond, King Cardinal and Libelle were grown for 18 months under five lighting regimes with, and without, soil cooling. The aim was to optimize the daily investment of light energy from artificial sources with respect to photoperiod and photosynthetic fluence rates and to elucidate possible links between reactions to photoperiod and root-zone temperature. The more photons (photosynthetically active radiation, PAR) that were supplied to the plants per day (8, 11 and 13 mol m⁻²), the higher was the total production of flowering stems. The total yield from regimes with 13 mol m⁻² day⁻¹ was higher when the light was spread over 20 and 16 h compared to 12 h. In treatments with soil cooling, the plants flowered continuously under all combinations of photoperiods and photosynthetic fluence rates, and the summer and autumn recession in flower production that occurred for non-cooled ‘King Cardinal' and ‘Diamond' was the same under all lighting regimes. It is concluded that it might be more cost-effective to spread the daily investment of light over 20 rather than 16 or 12 h when the total energy budget and CO₂ costs are taken into consideration.     

设施园艺技术发展动向

概述了人工光源调节生育、空气流动促进光合成、电解阳极水防治病害、喷雾降温、土壤营养液栽培和新覆盖材料等6项设施园艺技术的发展动向。     

二段冷却与一段冷却对冷却肉损耗的影响

通过对应用一段冷却和二段冷却方法的冷却肉的冷却温度、损耗的测定和比较,得出二段冷却的冷却肉温度下降较快和肉质损耗低的结论。     

Maximum slat width for cooling efficiency of horticultural produce in wooden crates

The influence of wood package design on airflow distribution was investigated for forced-air cooling using horticultural produce simulators. The position of grooves on the container walls was tested using slat width of 100–200 mm and airflow rates ranging from 0.0005 to 0.003 m³ kg⁻¹ s⁻¹. The package opening configurations were compared based on their impact on the energy added to the system using a methodology previously developed. For this purpose, apples and sweet corns were taken as examples of produce from two different extremes in the respiration activity range. For airflow rates as low as 0.0005 m³ kg⁻¹ s⁻¹one groove at the bottom of the container produced a cooling process more uniform than the other one-groove configurations and even two grooves because of natural convection effect. If packing low respiration rate produce, increasing airflow rate could compromise the process energy efficiency because of air circulation obstruction for less vented containers. For high respiration rate produce enlarging open area above 2.4% would be recommended rather than increasing airflow rate to enhance cooling energy efficiency.     

The Numerical Simulation Commercial Software for Secondary Cooling Process in Billet Continuous Casting

A numerical simulation commercial software has been developed by the object-oriented Visual Basic programming language on the basis of the 2D mathematical model of secondary cooling Process in billet continuous casting. Thereby an effective experimenting tool for computer simulation of continuous casting process is gained. By simulation with the software, the caster structures and operating parameters in continuous casting can be designed and optimized. The simulating calculation examples on several casters and its production applications indicate that the commercial software developed has more accuracy, practicability and commonality, as also as simpler operating capability. The simulated results have been successfully applied to the design and production of the high-efficiency modification for several billet casters interiorly.     

太阳能制冷低温储粮应用效果初探

从降低机械压缩式制冷低温储粮能耗及运行成本的角度出发,设计、建造了一台太阳能吸附式制冷系统,并将该系统在高温季节进行了低温储粮的实仓实验。测试结果表明:在夏秋高温季节,采用太阳能制冷系统冷却粮仓上部空气隔离层,可有效降低仓温,抑制粮温回升,实现准低温储粮。经济性分析表明太阳能制冷系统用于低温储粮的运行成本明显低于压缩式制冷谷物冷却机。     

Effect of cooling rate on high temperature mechanical properties of weathering steel

High temperature mechanical properties are key factors which affect fracture production during deforming process of continuous casting. High temperature properties of weathering steel Q450NQR1 are tested in 3 cooling rates (1.65, 5, 10 ℃/s) using Gleeble thermo-mechanical simulator. Specimens appear austenite dynamic recrystallization at 1 050 ℃, and the ductility reaches the lowest point and the reduction of area approaches 23% at 850 ℃ in 3 cooling rates. As the cooling rate increases, the low ductility area where cracks are easy to be produced in slabs is enlarged and extended towards low temperature, and the ductility troughs are deepened. The increase of the cooling rate decreases the tensile stress and yield stress, while when the cooling rate increases to some degree, it doesn’t affect the stress. The low cooling rate decreases the film or network ferrite producing in austenite grain boundary, and the carbonitride of microalloy is enwrapped in matrix, which is helpful to improve the ductility of steel.     

Development of HRB500E seismic grade rebars by using VN microalloyed and controlled cooling process

In order to reduce the production cost of HRB500E seismic grade rebars, promote its production and application, HRB500E seismic grade rebars are developed by using VN microalloyed and controlled cooling process in domestic steel plant. The mechanism and effect of precipitation strengthening and fine-grain strengthening, the relationship between termination temperature after controlled cooling and mechanical properties of rebars, microstructure, welding and aging properties, high-strain and low-cycle fatigue properties for rebars are researched by using metallographic microscopy, scaning electron microcopy, transmission electron microscopy, X-ray diffraction apparatus, flash-butt welding, materials testing machine and mechanical properties testing. The results show that V(C,N) precipitation amount accounts for 66.67% of the total amount of vanadium by adding VN alloy in liquid steel, effect of microalloy precipitation strengthening is remarkable; when termination temperature after controlled cooling is controlled at 680～710 ℃, the amount of strength surplus for rebars is more than 25 MPa, R m/ R eL ratio is greater than 1.26, uniform elongation ( A gt) is more than or equal to 11.5%, good effect of fine grain strengthening and seismic performance are obtained; rebars have some good features such as low strain aging, good welding performance, high-strain and low-cycle fatigue properties; compared with VN microalloyed and hot-rolled process,the production cost is reduced by RMB 82 Yuan/t, and economic benefit is obvious.     

苹果保鲜链中的几个重要环节

采摘、预防和贮藏是苹果保鲜链中的重要环节，采摘适宜成熟度的苹果可使贮藏更为容易并能避免多种水果病害，及对预冷可迅速去除田间热，从而延长保鲜期。气调贮藏不但经济而且有效。文章中介绍了小包装气调贮藏和大帐气调贮藏2种方法。