高压雾化设备在现代农业中的应用

高压雾化设备指利用高压雾化主机将经过精密过滤处理的水,输送到造雾专用高压管网,最后到达造雾专用喷头喷出成雾的系统。高压雾化设备在现代农业中主要应用在设施农业降温、加湿、植保以及景观等方面。其中,设施温室降温时依据地域的气候条件、系统投资、后期维护费用、运行费用、降温效果以及对温室湿度的影响等各种因素,来综合考虑高压雾化与其他降温方式联合使用降温,以期达到最佳效果。根据工程项目使用高压雾化设备的经验总结了相关建议,以期为实际生产提供参考。     

内冷油腔振荡冷却仿真方法研究

为了得出一种较为通用的活塞内冷油腔仿真分析方法,采用数值仿真研究方法,从湍流模型、多相流模型、压力速度耦合算法以及油腔几何模型进行油腔CFD仿真分析方法的研究。通过对比分析仿真所得的平均机油填充率、机油分布、壁面平均换热系数和换热系数分布,得出在进行活塞油腔CFD模拟时,标准k-ε湍流模型可以更为经济地进行流动传热计算。可保证计算模拟精度的多相流模型CLSVOF计算结果周期间变化更小,计算结果稳定。活塞油腔瞬态仿真计算时,压力速度耦合算法PISO计算得出的流动换热结果精度更高,收敛速度和达到计算稳定的速度更快,模拟所得流动传热情况更接近实际。全油腔模型模拟效果相对于简化模型效果更好。通过对油腔各壁面区域换热系数随曲轴转角变化的分析得出:振荡过程极大增强了顶面和底面的换热,油腔内壁面中顶部壁面周期平均换热系数最大;底部壁面换热系数变化趋势与顶部壁面变化趋势基本相反,这是由机油分布以及振荡规律决定的;由于侧部壁面未收到机油强烈的冲击,换热系数随曲轴转角变化相对较平缓。     

电站锅炉沼气点火装置的研究与设计

详细阐述了电站锅炉沼气点火装置的喷嘴,引射器及烧嘴的设计计算与稳定火焰的方法。应用结果表明,该点火装置火焰温度高,适应性强,使用经济,操作方便,在电站锅炉无油,少油点火方面有着广阔的应用前景。     

自动调角冷却风机内流动机理数值模拟研究

发动机的散热性能主要取决于发动机冷却风机的性能,发动机冷却风机内流动机理是农业机械研究的热点问题之一.通过对所设计的新型冷却风机在最佳安装角时的三维模型建立,运用FLUENT软件对风机进行内部流场的数值模拟计算,仿真得出风机叶轮的静压力分布云图和风机运转流场内空气流线图,以及风机流场内的各项空气动力学参数,仿真结果表明风机叶轮的空气动力性能满足冷却风机的设计要求.     

新能源汽车电池散热风扇驱动系统设计

采用基于Contex-M3架构的STM32系列单片机作为主控芯片,在uvision4环境中以C语言设计驱动系统软件;通过设计制作的系统硬件电路板,在新能源汽车电池散热风扇上进行空载试验,测试驱动系统对散热风扇的控制效果,并比较求反正切和锁相环2种转子位置信息估算方法的差异性．     

黑龙江省水稻冷害Ⅲ障碍型冷害敏感期的外部形态诊断

利用人工气候对黑龙江省早、中、晚熟的6个水稻品种在小孢子发育阶段进行低温处理,利用叶枕距和距抽穗期的天数作为标准评价水稻对低温的敏感期。结果表明,叶枕距在-5 cm以前、抽穗前14-18 d水稻就进入了对低温的敏感期。     

吴震东公式简化计算研究

混凝土工程冬季施工主要采用非加热养护方法,这类方法的技术关键是精确的热工计算,而热工计算目前仍广泛应用吴震东理论,按吴震东理论建立的整套公式可以描述混凝土在各咎情况下温度时间变化规律,但由于吴东公式较为复杂,许多学者对简化吴震东公式作了深化入的研究和讨论,据此分析了简化吴震东公式的思路、途径与方法,并评价了各类简化公式和近似公式的优点与不足之处。     

Optimizing the lighting regime for Alstroemeria with respect to photoperiod and fluence rates

The Alstroemeria cultivars Diamond, King Cardinal and Libelle were grown for 18 months under five lighting regimes with, and without, soil cooling. The aim was to optimize the daily investment of light energy from artificial sources with respect to photoperiod and photosynthetic fluence rates and to elucidate possible links between reactions to photoperiod and root-zone temperature. The more photons (photosynthetically active radiation, PAR) that were supplied to the plants per day (8, 11 and 13 mol m⁻²), the higher was the total production of flowering stems. The total yield from regimes with 13 mol m⁻² day⁻¹ was higher when the light was spread over 20 and 16 h compared to 12 h. In treatments with soil cooling, the plants flowered continuously under all combinations of photoperiods and photosynthetic fluence rates, and the summer and autumn recession in flower production that occurred for non-cooled ‘King Cardinal' and ‘Diamond' was the same under all lighting regimes. It is concluded that it might be more cost-effective to spread the daily investment of light over 20 rather than 16 or 12 h when the total energy budget and CO₂ costs are taken into consideration.     

冷却剂参数对铣槽喷管低周疲劳寿命的影响

采用有限体积流固耦合计算方法、非线性有限元热结构耦合分析方法和局部应变法研究大面积比铣槽喷管三维再生冷却槽道在循环工作条件下的热结构变形与低周疲劳寿命,并对比分析了冷却剂质量流量与入口温度对铣槽喷管疲劳使用寿命的影响。计算结果表明,铣槽喷管热结构响应呈现复杂的三维效应,应变较大位置主要分布在与肋连接的内衬区域,喷管中部的残余应变量最大；冷却槽道低周疲劳寿命分布和热结构响应基本一致,最小寿命位于喷管中部与肋相连的内衬区域燃气侧；随冷却剂质量流量增加,铣槽喷管低周疲劳寿命不断提高；随冷却剂入口温度增加喷管尾部低周疲劳寿命值不断降低,而喷管中前部的低周疲劳寿命值却不断提高,当冷却剂入口温度为280K左右时,本文的铣槽喷管总体使用寿命达到最大。      

Effect of floor cooling on performance of lactating sows during summer

Forty Landrace × Large White lactating sows were used to evaluate the effects of cooling of the floor when maintained under high temperature conditions during summer on their productive and reproductive performance. The sows were allocated in a completely randomized design with two treatments with 20 replicates according to parity number and body weight, with each animal being considered an experimental unit. The treatments consisted of cooling of the floor under the sow with water circulation at about 17 °C and no cooling. The resulting temperatures of the floor were 27.6 and 35.8 °C for the cooled and the control treatments, respectively. The sows from both treatments were exposed to average maximum and minimum environmental temperatures of 26.9 and 20.8 °C, respectively. Sows maintained on a cooled floor had a higher feed intake (6.47 vs. 5.61 kg/day; P < 0.01). Despite this higher intake, sows maintained on a cooled floor had higher body weight and body protein losses during the lactation period (P < 0.01) in connection with a higher milk yield and subsequent growth of the litter (2280 vs. 1798 g/day; P < 0.01). There was an effect of treatment on rectal temperature, surface temperatures and respiratory rate (P < 0.01) with lower values in sows submitted to floor cooling. It is concluded that floor cooling under the lactating sow improves its productive and reproductive performance, as well as the performance of its litter.