Potato absorption and phytoavailability of Cd,Ni, Cu,Zn and Pb in sierozem soils amended with municipal sludge compost

Effects of sludge utilization on the mobility and phytoavailability of heavy metals in soil-plant systems have attracted broad attention in recent years. In this study, we analyzed the effects of municipal sludge compost(MSC) on the solubility and plant uptake of Cd, Ni, Cu, Zn and Pb in a soil-potato system to explore the mobility, potato plant uptake and enrichment of these five heavy metals in sierozem soils amended with MSC through a potato cultivation trial in Lanzhou University of China in 2014. Ridge regression analysis was conducted to investigate the phytoavailability of heavy metals in amended soils. Furthermore, CaCl_2, CH_3 COONH_4, CH_3COOH, diethylene triamine pentacetic acid(DTPA) and ethylene diamine tetraacetic acid(EDTA) were used to extract the labile fraction of heavy metals from the amended soils. The results show that the MSC could not only improve the fertility but also increase the dissolved organic carbon(DOC) content of sierozem soils. The total concentrations and labile fraction proportions of heavy metals increase with increasing MSC percentage in sierozem soils. In amended soils, Cd has the highest solubility and mobility while Ni has the lowest solubility and mobility among the five heavy metals. The MSC increases the concentrations of heavy metals in the root, stem, peel and tuber of the potato plant, with the concentrations being much higher in the stem and root than in the peel and tuber. Among the five heavy metals, the bioconcentration factor value of Cd is the highest, while that of Ni is the lowest. The complexing agent(DTPA and EDTA) extractable fractions of heavy metals are the highest in terms of phytoavailability. Soil properties(including organic matter, p H and DOC) have important impacts on the phytoavailability of heavy metals. Our results suggest that in soil-potato systems, although the MSC may improve soil fertility, it can also increase the risk of soils exposed to heavy metals.     

高含固率木质纤维素厌氧发酵物总DNA的4种提取方法比较

不同的样本特性和提取方法对获得微生物总DNA的质量有重要影响。文章基于高含固率木质纤维素厌氧发酵物腐殖酸、酚类物质含量高、质地均一性差、微生物浓度低的特点,研究了4种方法提取不同高含固率粪秸厌氧发酵物中微生物总DNA的效果。结果表明,常规的十二烷基磺酸钠法(sodium dodecyl sulfate,SDS)、十二烷基磺酸钠和溴化十六烷基三甲铵结合法(sodium dodecyl sulfate and cetyltrimethyl ammonium bromide,SDS-CTAB)和商业的粪便试剂盒法提取的DNA质量均较差,SDS法和试剂盒法未能获得聚合酶链式反应(polymerase chain reaction,PCR)扩增目的条带,SDS-CTAB法得到的条带较模糊;改进SDS-CTAB法获得的DNA杂质少、纯度高,具有较好的稳定性,A260/A280和A260/A230值分别为1.74~1.86和1.65~1.86,每克样品的DNA浓度在50 ng·μL^-1以上,电泳条带单一齐整、清晰明亮,PCR扩增的目的条带清晰度高,适宜后续分子生物学技术的分析。林格氏液洗脱、聚乙烯吡咯烷酮-40(Polyvinyl Pyrrolidone-40,PVP-40)洗涤液除杂以及裂解液和多种酶联合破壁是改进SDS-CTAB法获得该类专一性样本高质量微生物总DNA的关键步骤。     

超高效液相色谱串联质谱法对水产品中硝基呋喃代谢物的测定

建立了使用Waters UPLC Xevo TQ超高效液相色谱串联质谱仪检测水产品中4种硝基呋喃代谢物的分析方法。匀浆后的样品在酸性环境下水解,并用2-硝基苯甲醛衍生16h,经磷酸氢二钾提取,LMS固相萃取小柱净化后,在三重四极杆多反应监测模式下进行测定。方法采用同位素内标法定量,四种代谢物的检出限(LOD)均低于0.25μg·kg-1,线性范围在0.5μg·L~(-1)到10μg·L~(-1)间,相关系数大于0.99。在0.5、1.0和5μg·kg-1浓度下分别进行添加回收试验(n=5),回收率在75.2%~123.3%之间,相对标准偏差(RSD)小于9.4%。     

分散固相萃取结合UPLC-Orbitrap MS联用测定鸡蛋中五氯苯酚残留量

建立了超高效液相色谱-静电轨道阱质谱联用测定禽蛋中五氯苯酚残留量的分析方法。取均质后的禽蛋样品经乙腈溶液提取,加入无水硫酸镁和氯化钠进行脱水和盐析,高速离心分层后,取适量乙腈层溶液经0.1%(V∶V)甲酸稀释后,用酸性氧化铝粉末进行样品净化并以10000 r/min离心取上清液,过0.22μm滤膜后上机测定。使用反相色谱柱进行分离,流动相为乙腈:0.1%甲酸=75∶25,采用等度程序进行洗脱,静电轨道阱质谱进行定性定量分析。结果表明,五氯苯酚在0.5~100μg/kg范围内线性关系良好(r>0.995),方法的最低检出限为0.2μg/kg,最低定量限为0.5μg/kg,添加回收率在74.43%~96.85%之间,批内批间变异系数CV%<10%。该方法具有较好的准确度与精密度,适用于禽蛋中五氯苯酚残留量的测定。     

餐厨废弃物饲料化技术及其在动物生产中的应用

餐厨废弃物(food waste,FW)的资源利用受到广泛关注。FW焚化、填埋、堆肥、厌氧消化等技术因其面临的环境可持续性问题而受到越来越多的批评。饲料化技术可以将FW转化为高价值的饲料,从而减少固体废物的排放、养殖成本和环境污染,但该技术应符合减少、再利用和回收有机废物的处理原则。作者综述了FW的饲料化技术及其在动物生产中的应用。FW饲料化技术主要包括热处理、酶处理、藻类培养、昆虫过腹、发酵技术。其中热处理可以确保微生物安全性,是其他技术的预处理技术。藻类培养和昆虫过腹技术可以将FW转化为植物和昆虫蛋白,避免同源污染,但尚不清楚藻类和昆虫在FW利用过程中是否会造成污染物积累。酶处理和发酵技术可以将FW中大分子转化为小分子。酶的催化性能和稳定性容易受外界条件的影响,需要考虑特殊的酶制剂。发酵技术的机械化程度和资源利用率高,其核心是微生物,需要筛选有效的、能充分利用FW的微生物。目前FW在畜牧业中的应用较少,在其生产和应用中要特别注意用量和使用时间。为了使FW饲料真正作为动物饲料进入食物链,研究人员必须对不同动物(含不同生长阶段)的生长性能和产品特性进行研究,以确保动物健康及动物产品对人类健康没有负面影响。     

猪场废弃物处理技术与应用

养殖废弃物对环境的污染越来越严重,为保证养殖与环境协调发展,我国开展养殖废弃物综合利用方式的研究。近年,各地开发出多种废弃物处理和利用方式,主要是以循环发展理念为技术发展方向,提高废弃物循环利用效率。该文列举国内外的养殖废弃物处理技术,结合我国生猪养殖现状,总结出适合我国的生猪养殖废弃物高效利用技术。     

鱿鱼内脏的营养及其开发利用

按照国标方法,对鱿鱼内脏的营养成分进行检测。结果表明,鱿鱼内脏营养丰富,每100 g鱿鱼内脏中含脂肪21.15 g,蛋白质21.24 g,钙51.46 mg,铁609.07μg和磷95.88μg。此外,鱿鱼内脏消化液中还含有18种氨基酸(包括全部人体必需氨基酸),鱿鱼内脏油脂脂肪酸中含有10.58%的EPA和15.23%的DHA,非常值得研究开发与利用。     

Solid Model Design on the Features of Products

To research the problem of plastic art design and emulation of products with the virtual reality technology can short the product development cycle and reduce the cost. This paper discusses the information based on the product feature ,solid model with parameters, the structure and function of this system. Combined the product properties with its solid model. Proposed a method with CAD to create the model of the product based on features in the product design. Expressed its feature parameter and shape of model fully .In the case for a deceleration box the feature model has solved the problem of physical information ,geometry information and the informative process in its production management system efficiently.     

Energy Assessement for Procedure Rationality of Recycling Materials from Wastes

The mathematical relationship for assessing total energy consumption within a material life cycle is presented in this paper. According to the relationship,the procedure rationality of recycling waste may be assessed quantitatively.