机电设备安装工程中常见问题及对策分析

机电设备安装工程施工是一项技术领域的工作,涉及到了多个工种和多道工序,因此存在特殊的要求。文章对机电设备安装施工中存在的一些常见问题进行了分析,并为提高机电设备的安装质量提出了一些建议。     

大类招生下机械电子工程专业学生实践和创新能力的研究与应用

文章从学生实践能力和创新能力两个核心能力培养方面进行了理论研究与实践探索。首先简要介绍了专业概况与研究背景,然后对几个核心概念进行了定义与解释,最后结合齐齐哈尔大学的一些做法与经验提出了大类招生下机械电子工程专业学生实践和创新能力培养的建议。     

Optimising cutting method and timing for the control of Abutilon theophrasti seed production

Abutilon theophrasti (velvetleaf) is a widespread and problematic annual weed. Greenhouse and field experiments were conducted to investigate the effects of different cutting methods on the viability of A. theophrasti seeds. Three cutting methods were assessed: (1) Entire plant cut and dried (EPD)—plants were cut at soil level and dried with capsules attached on the greenhouse bench or soil surface for 4 weeks; (2) capsules detached and dried (CD)—capsules were removed from plants and dried for 4 weeks; and (3) capsules detached and tested while fresh (CF)—a control treatment. Before drying, the developmental stage (stage one, dark green; stage two, light green; stage three, yellowish-green; or stage four, black with the slightly open capsule) and age (days after flowering, DAF) of each capsule was recorded. Seed viability was measured immediately in the CF treatment and after the 4-week drying period in the EPD and CD treatments. No seeds in the EPD and CD treatments were viable when harvested at the first developmental stage (1–8 DAF) in either experiment, but 100% of seeds in the CF treatment in the field were viable when harvested at 8 DAF. In both greenhouse and field experiments, seeds attained full viability at earlier harvest ages in CF than in EPD or CD treatments, suggesting that seeds might become viable relatively early in development but lose viability if allowed to dry. These findings could be applied to optimise late-season mechanical control of A. theophrasti.     

Evaluation of finger weeder safety and efficacy for intra-row weed removal in irrigated field crops

Increased demand for pesticide-free food and the development of herbicide-resistant weed populations have created a need for non-chemical weed-control tools. A candidate mechanical tool for controlling weeds in the seeding line (intra-row zone) is the finger weeder. This study thus aimed to evaluate the safety and weed-control efficacy of the finger weeder in various irrigated field crops. Eight field trials were conducted in processing tomato, sweet corn, sunflower, cotton, and beetroot over 2 years. The finger weeder treatments were applied as the sole weed-control method (single or double treatments) and in combination with herbicides. A mini meta-analysis was used to evaluate the overall effect of the finger weeder treatments on crop stand and yield and on weed control efficacy. Weed density in the control not treated with herbicides nor a finger weeder ranged between 2 and 62 weeds m⁻². The finger weeder treatments resulted in a significant reduction in weed density, which ranged between 40% and 90%. The weed density following the double finger weeder treatment was not significantly different from that for the conventional herbicide-based treatment (p = 0.32) and could therefore be considered as an effective environmentally friendly alternative. Furthermore, a single FW treatment integrated with herbicide application gave better weed control than the conventional herbicide treatment (p = 0.04). This treatment was safe for the crops with no significant stand (p = 0.19) or yield (p = 0.29) reductions compared to commercial treatment. The results of this study demonstrate the promise of the finger weeder as an effective tool within integrated weed management systems for conventional agro-systems. The tool offers a rational weed-control solution for sustainable systems under irrigation.     

Detection of Ecballium elaterium in hedgerow olive orchards using a low-cost uncrewed aerial vehicle and open-source algorithms

BACKGROUND

Ecballium elaterium (common name: squirting cucumber) is an emerging weed problem in hedgerow or superintensive olive groves under no tillage. It colonizes the inter-row area infesting the natural or sown cover crops, and is considered a hard-to-control weed. Research in other woody crops has shown E. elaterium has a patchy distribution, which makes this weed susceptible to design a site-specific control strategy only addressed to E. elaterium patches. Therefore, the aim of this work was to develop a methodology based on the analysis of imagery acquired with an uncrewed aerial vehicle (UAV) to detect and map E. elaterium infestations in hedgerow olive orchards.

RESULTS

The study was conducted in two superintensive olive orchards, and the images were taken using a UAV equipped with an RGB sensor. Flights were conducted on two dates: in May, when there were various weeds infesting the orchard, and in September, when E. elaterium was the only infesting weed. UAV-orthomosaics in the first scenario were classified using random forest models, and the orthomosaics from September with E. elaterium as the only weed, were analyzed using an unsupervised algorithm. In both cases, the overall accuracies were over 0.85, and the producer's accuracies for E. elaterium ranged between 0.74 and 1.00.

CONCLUSION

These results allow the design of a site-specific and efficient herbicide control protocol which would represent a step forward in sustainable weed management. The development of these algorithms in free and open-source software fosters their application in small and medium farms. © 2022 The Authors. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.     

Comparison between mainstream (Capnostat 5) and a low-flow sidestream capnometer (Capnostream) in mechanically ventilated,sevoflurane-anesthetized rabbits using a Bain coaxial delivery system

ObjectiveTo evaluate agreement between end-tidal carbon dioxide (Pe′CO₂) and PaCO₂ with sidestream and mainstream capnometers in mechanically ventilated anesthetized rabbits, with two ventilatory strategies.Study designProspective experimental study.AnimalsA total of 10 New Zealand White rabbits weighing 3.6 ± 0.3 kg (mean ± standard deviation).MethodsRabbits anesthetized with sevoflurane were intubated with an uncuffed endotracheal tube (3.0 mm internal diameter) and adequate seal. For Pe′CO₂, the sidestream capnometer sampling adapter or the mainstream capnometer was placed between the endotracheal tube and Bain breathing system (1.5 L minute^–1 oxygen). PaCO₂ was obtained from arterial blood collected every 5 minutes. A time-cycled ventilator delivered an inspiratory time of 1 second and 12 or 20 breaths minute^–1. Peak inspiratory pressure was initially set to achieve Pe′CO₂ normocapnia of 35–45 mmHg (4.6–6.0 kPa). A total of five paired Pe′CO₂ and PaCO₂ measurements were obtained with each ventilation mode for each capnometer. Anesthetic episodes were separated by 7 days. Agreement was assessed using Bland-Altman analysis and linear mixed models; p < 0.05.ResultsThere were 90 and 83 pairs for the mainstream and sidestream capnometers, respectively. The mainstream capnometer underestimated PaCO₂ by 12.6 ± 2.9 mmHg (proportional bias 0.44 ± 0.06 mmHg per 1 mmHg PaCO₂ increase). With the sidestream capnometer, ventilation mode had a significant effect on Pe′CO₂. At 12 breaths minute^–1, Pe′CO₂ underestimated PaCO₂ by 23.9 ± 8.2 mmHg (proportional bias: 0.81 ± 0.18 mmHg per 1 mmHg PaCO₂ increase). At 20 breaths minute^–1, Pe′CO₂ underestimated PaCO₂ by 38.8 ± 5.0 mmHg (proportional bias 1.13 ± 0.10 mmHg per 1 mmHg PaCO₂ increase).Conclusions and clinical relevanceBoth capnometers underestimated PaCO₂. The sidestream capnometer underestimated PaCO₂ more than the mainstream capnometer, and was affected by ventilation mode.     

杂交水稻制种提高结实率的研究

杂交水稻制种不同于水稻栽培、其结实由柱头外露结实和非柱头外露结实两部分构成；空壳中90％以上是由于没有授粉受精造成的：90％以上的受精拉都能正常发育结实。柱头外露率和受精率与结实率呈显著正相关。后期施肥、父本大龄秧和机械授粉能有效地提高柱头外露率、花遇优度和结实率及制种产量。     

Phase Transformation Diffusion Bonding of Titanium Alloy to Stainless Steel

Jointing of titanium alloy and stainless steel is very often in the fields like aviation, chemical plants etc. The combination of materials has the advantages of both titanium alloy and stainless steel and will reduce the consumption of titanium resource. The phase transformation diffusion bonding of TA17 titanium alloy to 0CriSNigTi stainless steel are carried out on Gleeble - 1500D. The effcet of maximum thermal cycle temperature, the tensile strength, the fracture surface and microstruture of the joints are investigated. The results show that TiFe and TiFe2 intermetallics and some solid solutions are formed along the interface, when maximum thermal cycle temperature increase, the area proportion of intermetallics in the fracture surface increase, which are detrimental to the mechanical properties of the transition joints.     

Operational Deflection Shape Analysis of Large Scale Electromechanical System

Operational Deflection Shapes of large scale electromechanical system can be ex-tracted directly from multipoints response of the operating system by using of the modal shape analy-sis method. Thev can be used for engineers evaluating the practical dynamic beavior of the largescale elecltromechanical system,checking the existence of local reso,iance of the Stibsystem. and in-dentifying the wcakened positions of the rigidity of structure, In this paper the method of measuringand extracting the operational deflection shal1e of the electromecha nical system is given and theavailability of operational deflection shape is proved by analyzing the actual vibration of a large ex-haust fan system as an example.     

Human Simulated Intelligence Motion Control for Three-link Acrobot on Horizontal Bar

The design of multi-controller and multi-mode control law is presented for the three-link Acrobot on horizontal bar by employing Human simulated intelligent control method based on sensory-motor Schema.Imitated the characteristics of gymnast's swing-up and handstand movement,the control process of robot is divided by six sequence phase.Then the sensory cell and motor cell and the group of sensory-motor schema is designed based on the analysis of quality-quantity combination.The simulation results show that the controller ensures the gesture and the energy to the desired goal,farther more the motion control of giant swing backword is realized in the simulation.