A PRACTICAL PWM CONTROL METHOD OF CURRENT SOURCE GTR INVERTER

According to the principle that the orbit of stator current vector in complerplane should be as close to a circle as possible, the PWM control pattern is derived and determined. The control method is realized by using a micro-computer.     

充水式潜水电机温升计算

充水式潜水电机的热传导和散热方式比较复杂，一般在计算潜水电机温升时，多采用类比法来计算，而类比法计算精度较低，本文采用简化热器法计算潜水电机的温升，经试验证明了该方法较为精确，它可以替代原精度较差的类比法。     

Surface drainage requirement of crops: Application of a piecewise linear model for evaluating submergence tolerance

Crop tolerance to land submergence is an important criterion for designing a surface drainage system for agricultural lands. This paper collates the available data from various places in India related to the studies on the submergence tolerance of crops. The paper hypothesizes that a piecewise linear model could be used to describe crop response to land submergence. According to this hypothesis, there would be no yield decline for a few initial days of submergence. If submergence continues beyond this period then there would be linear decline in yield. The unknown parameters in the model are: optimum yield, threshold time and the slope which represents the per cent yield reduction per day of additional submergence beyond the threshold.Data in respect of wheat, pigeon peas, cowpeas, pearlmillet, maize and groundnuts indicate that the model describes the data well, although in many cases the threshold is 0.0. The yield reduction varies from 5.3 to 23.2% for each day of submergence beyond the threshold. It appears that to allow for more than 1–2 days of submergence will result in more than 10% reducation in yield of dryfoot crops. For the maize crop, the seedling stage is the most sensitive stage followed by the silking stage. The grain formation stage is the least sensitive, although even at this stage the threshold is 0.0 and yield reduction is 9.3% for each day of submergence beyond the threshold. The data for 9 test crops from Texas and Venezuela were well described by the model. It is concluded that the piecewise linear model is a useful tool for describing submergence tolerance of crops and for working out surface drainage requirements for a given level of yield reduction. Frequency analysis of the daily rainfall data from some selected locations indicates that there is every likelihood of submergence at most of the stations. It is suggested that there is an urgent need for developing wet farming techniques analogous to dry farming techniques.     

生物柴油技术发展现状及其产业化方向的探讨

介绍了生物柴油技术在国内外的发展现状，重点阐述生物柴油制取技术的突破和最新进展，生物柴油自身理化特性的研究和国家标准的制定，生物柴油对汽车动力性、经济性及排放性能的积极和消极影响。另外，对生物柴油在中国的产业化发展方向上提出几点看法。     

组合预测方法及其在粮食产量预测中的应用

提出了一种组合预测方法，以“预测偏差绝对值的和最小”为标准，用线性规划确定组合权系数的最优加权算法，对青海省的粮食总产量进行了预测分析。结果表明，此模型具有较高的精度。     

基于改进PSO算法的电机控制系统PID参数优化

粒子群算法(PSO,Particle Swarm Optimization)作为一种新型的随机优化方法,其算法结构简单,鲁棒性强,在组合优化和自适应控制等领域的非线性优化中有着广泛的应用前景.为此,提出一种改进的PSO优化算法,并将该算法应用于电机控制系统的PID参数优化设计.仿真结果表明,利用改进PSO算法优化的PID参数能有效改善控制系统的性能指标.     

永磁电机转子的接触有限元分析

应用大型有限元分析软件ANSYS，对永磁电机转子中永磁体和转子铁心的接触非线性状态，进行了三维有限元分析，得出了永磁电机转子的应力分布情况。结果表明：该结构转子的机械强度和刚度可满足电机最高转速时的机械性能要求，可以保证电机的安全运行。此分析求解过程也为类似的接触有限元分析提供了参考。     

水泵用新型单相感应电动机仿真研究

作为三相感应电动机单相运行的一种特殊接线方式，与三相感应电动机在三相对称电源上运行相比，SEMIHEX接线方式具有更高的功率因数和效率，其起动转矩较低，非常适用于微型水泵用电动机。为便于该电机的推广使用。本文建立了SEMIHEX接线方式电动机的动态仿真数学模型，然后对其起动过程进行了仿真计算，计算结果与试验结果较吻合。     

分析阶梯流量井流试验数据的线性回归法

文中应用线性回归法，对一次阶梯流量井流试验数据进行适当交换后，可得回归直线方程，与目前采用的多次阶梯流量井流试验数据的分析相比较，在同样可以得到井流实验欲求的井损系数C，综合参数和含水层导水系数T三个参数的情况下，至少可以使抽水量的变化次数减少两次。实际算例表明，一次阶梯流量井流与多次阶梯流量法的计算结果非常吻合。     

Conversion to organic arable farming in The Netherlands: A dynamic linear programming analysis

Several studies show that organic farming is more profitable than conventional farming. However, in reality not many farmers convert to organic farming. Policy makers and farmers do not have clear insight into factors which hamper or stimulate the conversion to organic farming. The objective of this paper is to develop a dynamic linear programming model to analyse the effects of different limiting factors on the conversion process of farms over time. The model is developed for a typical arable farm in The Netherlands central clay region, and is based on two static liner programming models (conventional and organic). The objective of the model is to maximise the net present value over a 10-year planning horizon. The results of the analysis of a basic scenario show that conversion to organic farming is more profitable than staying conventional. In order to arrive at the actual profitable phase of organic farming, the farmer has to pass through the economically difficult 2-year conversion period. Sensitivity analysis shows that if depreciation is 25% higher than conventional fixed costs due to machinery made superfluous by conversion, conversion is less profitable than staying conventional. Also the availability of hired labour, which can be constrained in peak periods, has a strong effect on the cropping plan and the amount of area converted. Further analysis shows that a slight drop (2%) in organic prices lowers the labour income of the farmer and makes conversion less profitable than conventional farming. For farmers, a minimum labour income can be required to ‘survive’. The analysis shows that constraint on minimum labour income makes stepwise conversion the best way for farmers to overcome economic difficulties during conversion.