清、洪水灌溉条件下土壤中盐分运移规律的试验研究

在大同县罗庄村玉米地进行洪水灌溉与清水灌溉的大田灌水试验,研究在不同的灌水定额下,用洪水与清水灌溉后,土壤剖面上盐分的运移规律。研究结果表明:用洪水与清水灌溉后,土壤中盐分的运移规律基本相同;盐分随水分运动而向下运移的深度随灌水定额的增大而增大。     

节水灌溉的水稻干物质积累C-R模型研究

介绍了水稻干物质模型的研究进展和Chapman-Richards模型的数学结构以及该模型在描述林木生长和不同生物种群生长过程中的应用,并根据国家“863”节水农业专项子课题现场试验资料,用Chapman-Richards模型模拟了水稻干物质积累过程。结果表明。用Chapman-Richards生长方程来模拟控灌水稻干物质积累过程中,Logistic模型拟合效果最好。并根据模型参数对水稻生长过程进行了分析。     

土壤水分胁迫对紫花苜蓿光合特性及其生物量的影响

紫花苜蓿是我国重要的豆科牧草,具有较强的抗旱能力,而水分亏缺是影响其产量的主要逆境因子之一。通过大田试验对不同水分胁迫下紫花苜蓿的光合特性及产量进行研究,结果表明:①土壤水分胁迫对紫花苜蓿光响应参数影响显著(P<0.05),随着水分胁迫的加剧,最大净光合速率、表观量子效率、光饱和点逐渐降低,暗呼吸速率、光补偿点逐渐升高,从而直接影响紫花苜蓿光合作用对弱光的吸收和转化效率。②随着水分胁迫的加剧紫花苜蓿叶片的净光合速率(Pn)和蒸腾速率(Tr)呈显著的下降趋势,气孔导度(Gs)呈先下降后上升的趋势,表明轻度水分胁迫下气孔因素是Pn下降的主要因素,中度和重度水分胁迫下非气孔因素是Pn降低的主要因素。③当光合有效辐射(PAR)为1200μmol·m^-2·s^-1时,轻度水分胁迫的水分利用效率(WUE)显著大于充分灌溉的WUE(P<0.05),表明适度水分胁迫可提高紫花苜蓿叶片的水分利用效率。④轻度水分胁迫与充分灌溉干草产量之间无显著差异,表明轻度水分胁迫能达到高产节水的目的。     

苹果银叶病的发生与防治研究

苹果银叶病的传播途径包括孢子侵染伤口传播、菌丝传播和根系传播.采用发明专利系列治疗药物注孔和灌根并用,按指示剂、治疗剂、排毒剂的顺序用药可以根治苹果银叶病.碱性药物波尔多液和石硫合剂有抵消药效的作用,不能用作保护剂.     

膜下滴灌棉田冻融期土壤剖面水盐热分布动态

为了深入揭示干旱区膜下滴灌棉田冻融期土壤水、盐和温度的动态变化规律,利用Hydra水盐热系统实现对冻融期宽行、窄行和膜间位置15,25和40 cm深度土壤液态水分、温度和电导率实时等间隔加密监测,分析了冻融期土壤水盐热动态变化过程.结果表明:同一位置不同深度液态水分、电导率和温度动态变化规律一致;冻融期内盐分垂向运移规律为深层土壤内的盐分向表层运移,冻融作用使盐分发生了重分布,加重了土壤40 cm深度的盐分含量,电导率增值范围为20~80 μS/cm,并且冻融前后不同位置电导率以位置排序由大到小为宽行,窄行,膜间;在冻融过程中不同位置土壤温度、液态水分和电导率两两之间存在着正相关关系(P<0.01),其相关系数大于0.74,而电导率与温度和液态水分两者也存在极强的多元一次函数关系(P<0.01),其相关系数大于0.90;冻结和融化并不是重合的过程,而是在期间会出现分叉点,分叉点出现在-1 ℃附近.研究结果对制定合理的非生育期灌溉制度具有重要参考意义.     

Contamination of shallow groundwater system and soil-plant transfer of trace metals under amended irrigated fields

This study focuses on experimental pilot assessment of contamination of shallow groundwater systems and soil-plant transfer of trace metals under amended irrigated fields. The study approach involved a pilot experimental (greenhouse) set-up of organo-mineral amended test plots/troughs (40 cm × 47 cm × 46 cm) planted with two common vegetable crops (Amaranthus hybridus and Abelmoschus esculentus) and irrigated with wastewater. In addition to the geochemical analyses of the primary un-amended and amended soils before planting as well as residual soils after harvesting, measurements of the physico-chemical parameters and chemical analyses of trace metals concentrations in irrigation leachates and harvested vegetable tissues were also undertaken following appropriate standard sample preparation and analytical methods.The results of the geochemical analyses carried out on irrigation leachate samples collected during the sprouting stage revealed that most of the analyzed trace metals in the collected leachates exhibited 2-10 folds depletion (except for Cu and Co with enrichment of about 1.5-3 folds) compared to the initial wastewater used for irrigation. A situation attributed to uptake/bioaccumulation of these metals and selective enrichment in the residual soils as well as to leaching by infiltrating irrigation water. Nonetheless, the observed higher trace elements concentrations in the second sets of leachates collected during harvesting stage compared to the first sets of leachates collected during the sprouting/vegetative stage is an indication of higher plant uptake during sprouting/vegetative stage or initial sorption/complexation of biosolids amendment before later vertical re-mobilization by infiltrating irrigation water.Although, virtually all of the analyzed metals exhibited elevated concentrations (2-173 ppm) in both A. hybridus and A. esculentus, a closer evaluation revealed 1.2-8.2 folds enrichment of Cr, Co, Ni, Cd, Cu, and Pb in A. esculentus compared to that of A. hybridus, an indication of the fact that phyto-accumulation of trace metal is plant-specific and dependent on physiological set-up. The overall evaluation had clearly demonstrated the potential danger of bioaccumulation of toxic trace metals under biosolid amended soils as well as impacts of irrigation-induced leaching on the shallow groundwater quality, while the need to evolve a sustainable agricultural practices is also highlighted.

Capsule

Organo-mineral amendment can lead to trace metal bioaccumulation (in plants) and irrigation-induced leaching to shallow groundwater system.     

Comparing theoretical irrigation requirement and actual irrigation for citrus in Florida

Florida ranks first in citrus production, with nearly 68% of all U.S. citrus growing in the season 2005-2006. Most of the citrus groves are located from central to south Florida, and agricultural irrigation permitting is regulated by three of Florida's five water management districts. Most of the permitting for citrus production in Highlands, Polk and Hillsborough counties is conducted by the Southwest Florida Water Management District (SWFWMD), and quantities are based on the District's AGMOD computer program. In 2003, the SWFWMD implemented new permit criteria so that permitted amounts were more representative of actual water use. This paper compares grower reported citrus irrigation water use in Highlands, Polk and Hillsborough counties from 1994 through 2005 with permitted and theoretical irrigation requirements calculated by a daily water balance. Two different sets of crop coefficients (K_c's) developed for citrus in Florida were compared in the daily soil water balance calculation of theoretical irrigation requirements. The percentage of irrigated area considered in this study ranged from 40 to 60% to simulate a range of grower practices. Meteorological data from two weather stations and additional rainfall information from 50 locations within the three counties was used in the water balance. Missing and error values in the meteorological historical record data were filled with weather generators. The multiannual average water consumption (including cold protection water use) from growers ranged from 243 (Hillsborough) to 406 mm (Highlands) and the multiannual average permitted irrigation requirement (without cold protection) ranged from 295 to 557 mm. The simulated gross irrigation requirements under different scenarios of location-K_c-wetted area were variable but mostly lower than the limits established by the district, except for some scenarios in Polk County, whose maximum simulated irrigation value reached 578 mm year⁻¹. In general, permitted limits recommended by the SWFWMD seem to be reasonable for the actual water use by growers in these counties.     

Irrigation scheduling strategies for cotton to cope with water scarcity in the Fergana Valley, Central Asia

The Central Asian countries face high water scarcity due to aridity and desertification but excess water is often applied to the main irrigated crops. This over-irrigation contributes to aggravate water scarcity problems. Improved water saving irrigation is therefore required, mainly through appropriate irrigation scheduling. To provide for it, after being previously calibrated and validated for cotton in the Fergana region, the irrigation scheduling simulation model ISAREG was explored to simulate improved irrigation scheduling alternatives. Results show that using the present irrigation scheduling a large part of the applied water, averaging 20%, percolates out of the root zone. Several irrigation strategies were analyzed, including full irrigation and various levels of deficit irrigation. The analysis focused a three-year period when experiments for calibration and validation of the model were carried out, and a longer period of 33 years that provided for an analysis considering the probabilities of the demand for irrigation water. The first concerned a wet period while the second includes a variety of climatic demand conditions that provided for analyzing alternative schedules for average, high and very high climatic demand. Results have shown the importance of the groundwater contribution, mainly when deficit irrigation is applied. Analyzing several deficit irrigation strategies through the respective potential water saving, relative yield losses, water productivity and economic water productivity, it could be concluded that relative mild deficits may be adopted. Contrarily, the adoption of high water deficit that produce high water savings would lead to yield losses that may be economically not acceptable.     

无功就地补偿技术在农业排灌泵站中的应用

目前农业排灌站普遍存在功率因数低、无功损耗大的情况.无功就地补偿技术,可以有效地提高供配电系统的功率因数,达到节能的效果.为此,针对6kV配电站的补偿方式进行了仿真分析,论证了在排灌泵站中采用无功就地补偿技术的经济可行性,并对推广该技术存在的问题,提出了一些建议.     

PLC及变频调速恒压喷灌系统的设计

针对喷灌系统受作业区域需水量的影响造成系统喷头不能稳定可靠工作的问题,结合工程实例,提出了利用PLC及变频器来实现温室喷灌系统恒压供水.给出了变频调速恒压供水系统原理图,并进行了系统的主电路设计和软件设计.阐述了利用上位机、PIC、变频器、压力变送器、电机-水泵系统等组成的恒压供水系统,能按照设定的工作压力,实时切换泵组投入工频或变频状态运行,达到恒压供水的目的.系统能通过上位机实现下位机的控制参数的设定、系统的实时监测、数据管理等任务,自动化程度高.应用表明,系统实现简单,操作方便,运行稳定,可靠,且具有较好的节能效果.