猪血免疫球蛋白的热稳定性及动力学研究

为了使猪血免疫球蛋白在各类食品中得到较好的应用 ,对猪血免疫球蛋白 (PIgG)的热稳定性及热变性动力学进行了分析研究。结果表明 ,PIgG在 6 0℃以下很稳定 ,6 0～ 6 5℃比较稳定 ,大于 70℃变性明显加快 ,超高温杀菌 (12 0℃ ,4s)条件下 ,PIgG几乎失活 ;其热动力学反应为 1 2级 ;在 6 0 ,6 5 ,70 ,75 ,80 ,85和 90℃ ,PIgG热变性的D值分别为 33 333× 10 3 ,14 2 86× 10 3 ,3 333× 10 3 ,0 4 76× 10 3 ,0 2 2 2× 10 3 ,0 16 9× 10 3 和 0 0 76× 10 3 s ,在此温度范围内的Z值为 10 81℃ ,表观活化能为 2 2 7 31kJ·mol-1。     

污水污物潜水旋流泵性能及设计方法试验研究

对影响潜水旋流泵性能的6个主要过流件几何参数进行了试验研究，初步掌握了旋流泵叶轮及泵体主要几何尺寸对性能影响的规律。在分析16种优秀水力模型的基础上，计算出叶轮D2及b2函数回归方程式，并用设计实例进行检验，样机效率比国内外同类产品提高3％左右。     

朝阳东大桥承台砼施工技术

叙述了朝阳东大桥主桥两个承台大体积砼的施工经过。总结了施工方案优选过程和大体积低水化热砼的配合比试验情况,并在实际施工中,证明,该技术措施可行,方案经济合理,取得了比较成功的经验。     

谏壁发电厂泵站改造实践

为解决渣浆泵在运行时轴封水供应困难的问题，计算了谏壁发电厂松林山泵站的装置特必,天详细分析论证的基础上，确定了泵站的改造方案，进行了叶轮的优化设计。     

水电站虹吸式进水口的控制

在对河北省几座已建虹吸式进水口水电站的虹吸控制方式进行分析对比的基础上,给出了一种采用液气射流泵将虹吸体抽成“低管”正虹吸,用“Y”形管中的水封保持真空,事故时利用“高管”自动补气破坏真空的控制系统,并分析了该系统的特点,给出了设计计算方法及计算公式。     

针阀调节式液体射流泵的试验研究

介绍了多种不同结构参数的针阀调节式液体射流泵的试验结果，分析了结构参对泵性能的影响，推荐了合理的结构型式及参数，提出了计算泵性能的经验公式。     

细菌耐药拮抗剂的研究

本文介绍了具有拮抗细菌耐药性作用的物质的研究进展情况，包括灭活酶抑制剂、药物渗透促进剂、外输泵抑制剂、细菌生物被膜抑制剂、抗菌药物增强剂、耐药质粒消除剂等。     

SS-1型声速实验仪的研制

本文阐述了SS—1型声速实验仪的原理、结构和测量方法。波动学和分子物理学是物理学中的重要组成部分,"声速的测量"和"Y值的测量"两个实验有助于学生对波动相位的空间分布、谐振动的合成、李萨育图、能量按自由度均分原     

Periodicity and gradients in dispersal ofAlternaria linicola in linseed crops

Conidia ofAlternaria linicola produced on infected linseed crops were mainly dispersed by wind. The numbers of conidia in the air above linseed crops collected by a Burkard spore sampler were greatest between 1200 h and 1300 h, when the relative humidity was lowest. Although numbers of conidia collected decreased with increasing height within and above the crop canopy, air-borneA. linicola conidia were present up to 80 cm above the crop canopy. Conidia ofA. linicola were transported by wind up to at least 40 m downwind from an artificial line inoculum source, but their numbers decreased with increasing distance from the source. In 1991, 1992, and 1993, the dispersal ofA. linicola conidia above linseed crops followed a seasonal periodicity which was influenced by weather conditions and cultural practices. The greatest numbers of conidia were collected during July, August and early September and coincided with periods favourable for sporulation and with an increase in the incidence of the disease in the senescent crop. Air-borneA. linicola conidia produced on point or line inoculum sources (naturally infected linseed stem debris) were responsible for the spread of the disease in linseed crops. In 1992 and 1993, the disease was first detected downwind from the sources, but by the end of the growing seasons, it had spread in all directions and up to 20 m and 60 m from the sources, respectively. Disease gradients were initially steep near the inoculum sources but they became flatter with time due to the secondary spread of the disease.     

黑木耳烘干控制系统的研究

黑木耳烘干控制系统，采用压缩式热泵，AT89C51单片机、SHT75型温湿度传感器、加热器等组成温湿度控制电路。控制干燥室内的温湿度，完成对干燥室内的黑木耳进行低温、高效率的去湿干燥。