Synthesis and Properties of Vanadium-doped Spinel LiVxMn2-XO4

A method of preparing the spinel LiV_(x)Mn_(2-x)O_(4) with liquid phaseis introduced at a low temperature. With cyclic voltammogram and discharge-charge tests at content current, we find that the doped vanadium leads to the spinel structure more stable, the reversible behaviors of LiV_(x)Mn_(2-x)O_(4)is improved, and the capacity fade on cycling is reduced.The cycle life of the battery based on LiV_(x)Mn_(2-x)O_(4)is also found improved.     

Around Body Flow Computation with Vortex-Flow-streamFunction in Boundary Fitted Coordinates

In this paper, partial differential equations of vortex flow-stream function in boundary fitted coordinates and related ADI equations were listed. The flow around a cylinder in quadrilateral area by auto control boundary was computed. The diagram of distribution of speed arrow, constant lines of flow-stream function, vortex, two speed parts and pressure were studied.     

Study on the Sedimentation Rule of the Particles in Debris Flow

In this paper, according to the study on a great number of experiments and data analyses, the sedimentation rule of solid particles in debris flow is set up. Three main factors that influence the particle sedimentation in debris flow were studied; the basic reasons to influence the particle sedimentation were analyzed. The particle sedimentation in debris flow could be divided into three stages,i, e. the starting stage, the quick sedimentation stage and the accumulation stage,and detailed analysis on the sedimentation process each stage was made. The liquid viscosity, particle quality and additional water pressure have an important role on the sedimentation rule of the particle in debris flow.     

Carrying Capacity of Stretching-bending Rectifier

In accordance with the deficient elongation of the Stretching-bending Rectifier, as well as the severe wear and slipping of V-belt , the driving system velocity ratio of rectifier and the calculation formula of the theoretical elongation are deduced, which are based on the analysis of its structure and reeling principle. The carrying capacity of the driving system is also analyzed and it reaches the main reason for the elongation of the stretching-bending rectifier that cannot reach request, which is caused by the step less torsion of fixed output of the continuously variable transmission. The improvement measure which can be achieved by increasing the stiffness of the spring to increase the output torsion of the continuously variable transmission is proposed. Thus it makes the actual coefficient of elongation,which can satisfiy the producing request.     

四流T型中间包控流装置优化的水模拟分析

以某钢厂四流中间包为研究对象,根据相似原理建立了1∶3的物理模型。模型研究了不同结构的挡墙、导流孔和湍流抑制器对中间包内流动特性的影响。实验结果表明,“Y”型挡墙和梯形湍流抑制器(方案F)组合的控流装置能获得相对较优的实验结果。采用方案F的控流装置后,总体的死区比例从原型的23.69%降为8.02%,钢液能得到更为充分的混匀;各流平均停留时间的标准差从原型方案的23.56降低到7.34,各流一致性也得到了明显的改善。     

The analysis of China wind power industry

The development course of China wind power industry is reviewed by six stages. National policies on wind power industry are elaborated from the aspects of laws & regulations, planning, finance & taxation and electrovalence policy. And these policies have played an important supporting and regulating role in the development of wind power industry. The development status of China wind power industry is analyzed based on wind turbine installed capacity, wind power output and their growth rate. It is explained that national wind turbine manufacturers have kept developing and become strong by the data of new global installed capacity share of mainland wind turbine manufacturers in 2013 and the new global market share of 8 domestic enterprises among the world top 15 wind turbine manufacturers. But there are still 5 key problems which influence the development of national wind turbine need to be solved, including lack of top-level design, abandon and restriction wind power seriously, lack of R&D abilities, some of the key parts relying on imports and wind turbine facing a quality guarantee dilemma. Taking Sinovel Wind Group Co. Ltd. and Xinjiang Goldwind Sci & Tech Co. Ltd., the two leading companies as an example, their performance is analyzed and it’s pointed out that the wind industry must keep vigilant after the overspeed development. The enterprises should try to avoid neglecting cultivating their inner core competitive ability, including technology advancements and products reliability. Occupying the market with low price competition and expanding blindly is also not desirable. At last, the development prospects of our country’s wind power industry are analyzed and three proposals are put forward.     

OPTIMAL CONTROL ELIMINATING SWING FOR THE LIFTING CAPACITY

This paper discusses the model for lifting capacity of the crane and optimal con-trol of eliminating swing in lifting process. One half loop control method is presented, which is onlyto examine and measure the trolley speed for eleiminating swing.The fact shows this methOd is sim-ple and practicle for enginceering.     

切线泵流动特征的整流场数值模拟

对单级切线泵在设计工况进行了定常流动数值模拟，分析了叶轮流道及蜗壳内的液体流动情况。结果表明，切线泵内流场非常复杂，叶轮进口有明显冲击，叶轮各流道的速度、压力差异很大，环形蜗壳内流动呈现旋涡推进特征，上、下游流动有强烈的相互作用，整机流场不具有对称性；环形蜗壳的几何结构以及流场上、下游的相互作用是导致整机流场非对称特性的主要原因。计算结果为进一步改进结构、提高性能、减小水力损失提供了理论依据。     

荷电颗粒多相湍流数学模型的构建

随着静电喷雾技术的发展,对荷电多相湍流的研究也不断深入,由于这一流动现场极其复杂,模型构建的难度增大.在多相湍流模型建立的理论基础上,采用双流体模型,考虑湍流脉动与电场耦合作用,引入“体平均”概念,构建了荷电多相湍流数学模型.“双流体”多相湍流模型在工业领域模拟复杂湍流中的成功应用和不断发展,为荷电多相湍流提供了新的工程模拟模型和方法.在单相荷电流体湍流模型方程建立的基础上,根据“双流体”多相湍流模型建立的理论基础,把荷电颗粒当作拟流体处理,借用拟流体多相湍流描述方程建立的方法,推导了荷电颗粒拟流体多相湍流的描述方程,为进一步获得荷电颗粒拟流体多相湍流模型提供了基础.