饲喂频率对妊娠母猪背膘厚和繁殖性能的影响

[目的] 研究饲喂频率对妊娠母猪背膘厚和繁殖性能的影响。[方法] 挑选加系杜洛克经产母猪480头,配种时按照胎次（2~7胎）、背膘厚（11~22 mm）相近的原则随机将母猪分为T1组（每天饲喂1次）和T2组（每天饲喂2次）,两组每天等量饲喂。T1组母猪220头,饲喂时间为8：00;T2组母猪260头,饲喂时间为8：00和15：00,每次饲喂量为总量的一半,定位栏饲养。[结果] ①饲喂频率不影响妊娠56 d、开配-妊娠56 d的背膘厚（妊娠56 d背膘厚-开配背膘厚）（P>0.05）;T2组妊娠110 d（P=0.06）、妊娠56-110 d（P=0.09）背膘厚（妊娠110 d背膘厚-妊娠56 d背膘厚）有高于T1组的趋势。②饲喂频率对窝产总仔数、活仔数、死胎数、木乃伊胎数、初生窝重以及初生个体重均无显著（P>0.05）影响。③在三胎母猪中,T2组妊娠110 d（P=0.01）、妊娠56-110 d（P=0.04）背膘厚均显著高于T1组;五胎及以上母猪,T2组妊娠56-110 d（P=0.08）背膘厚有高于T1组的趋势。④饲喂频率不影响二胎母猪窝产总仔数、死胎数、木乃伊胎数、初生窝重以及初生个体重（P>0.05）,但二胎母猪中T2组活仔数有高于T1组的趋势（P=0.07）。[结论] 饲喂频率由每天两餐减少到每天一餐不会对母猪的繁殖性能产生不利影响。     

Wood Moisture Content Measurement by X-Ray Exposure Method

lNTRoDUCTIONTheon-sitcnon-dcstructit'cmcasurcl11cntofu.oodmoisbocontcntattTactsgrcatintcrcsts.Itpla3'simpor-tantpartsinthescicntificrcscarchsucl1asonthchcatandmasstransportproccssesint"ooddri'ing.thcim-pregnationofliquidinxt'ood.thcmoisturccontcntdistri-b…     

提高刨花板尺寸稳定性的研究——刨花预处理和刨花板的后期热处理

以速生意大利杨为材料,对刨花进行预处理后制成脲醛胶刨花板,用未处理刨花制成酚醛胶刨花扳,并进行后期热处理,分别测试它们的尺寸稳定性,结果表明,两种方法都能较为有效地提高刨花板的尺寸稳定性,具可行性,通过合理选择适宜的预处理和后期处理的时间,可以使刨花板的性能达到预期要求。     

基于仿真理论确定缓冲特性曲线方法的研究

本论文探索了一条确定缓冲特性方法的新途径，通过测定缓冲材料的静态特性与一次动态；中击数据为基础，建立数学模型，利用最小二乘法进行误差分析，并使用Madab/Simulink软件仿真出缓冲特性曲线。这种方法得出的缓冲特性曲线准确性高、试验周期短，待理论成熟必将成为今后缓冲材料特性测试的主要方法。     

混合型复合地基与摩擦桩在基础工程应用中比较分析

介绍混合型复合地基和摩擦桩的承载力特点，并通过工程案例的分析，在两种基础的承载力、造价、材料等方面进行比较，表明混合型复合地基相对摩擦桩来说更适合此工程。针对目前混合型复合地基的理论研究和试验研究的进展，提出今后需要解决的问题。     

Effects of light and microsite conditions on tree size of 6-year-old Cryptomeria japonica planted in a group selection opening

We examined the extent to which direct and indirect measures of light and microsite conditions could explain variation in tree height and diameter at the base of 6-year-old Cryptomeria japonica trees planted in a group selection opening of about 0.32 ha on a steep slope at Shiiba, Miyazaki Prefecture, southern Japan. We first used the gap light index (GLI) and soil thickness (ST) as directly measured indices. For an indirect measure of light, we used a between-cohort competition index (BCI) estimated from the position and total height of residual trees. For indirect measures of microsite, we examined topographic indices (slope, plan and profile curvature, average slope gradient, and relative elevation) derived from digital elevation models (DEMs) with different resolutions ranging from 2 to 10 m. The multiple linear regression using GLI and ST explained about 45% of variation in tree size, while simple regression using only GLI explained about 35%. The contribution of ST was about half of GLI. The multiple regressions using BCI and the topographic indices did not explain any more variation than using BCI alone (R ² of about 0.26). We conclude that microsite conditions with shallower soil and steeper slope have negative effects on tree growth in group selection openings, although the relative importance is smaller than light conditions. More comprehensive studies considering several openings with more heterogeneous topography including different species are needed to generalize our growth prediction using the indirect measures, which are useful for practical forest management.     

Fatigue of structural plywood under cyclic shear through thickness I: fatigue process and failure criterion based on strain energy

The fatigue behavior of plywood specimens under shear through thickness was examined on the basis of strain energy to obtain common empirical equations for the fatigue process and failure criterion under various loading conditions. Specimens were cut from commercial plywood panels of 9-mm thickness. Loading conditions were set as follows: a square waveform at a loading frequency of 0.5 Hz, a triangular waveform at 0.5 Hz, and a triangular waveform at 5.0 Hz. Peak stress applied was determined to be 0.5, 0.7, and 0.9 of static strength, that is, stress levels of 0.5, 0.7, and 0.9. The stress-strain relationships were measured throughout the fatigue test, and the strain energy was obtained at each loading cycle. Loading conditions apparently affected the relationship between stress level and fatigue life. On the other hand, the relationship between mean strain energy per cycle and fatigue life was found to be independent of loading conditions. Mean strain energy per cycle obtained as the fatigue limit was 5.85 kJ/m³ per cycle. Assuming that the accumulation of strain energy is a fatigue indicator, the fatigue process and failure criterion for the plywood specimens under the three loading conditions were commonly expressed by the relationship between cumulative strain energy and loading cycles.     

Performance of samama (Anthocephalus macrophyllus) LVL based on veneer thickness,juvenile proportion and lay-up

ABSTRACT

A study to determine the quality of laminated veneer lumber (LVL) from samama wood (Anthocephalus macrophyllus) was carried out. Samama is a fast-growing endemic wood in eastern Indonesia. Factorial of three factors in RAL design was used to investigate the influence of veneer thickness, juvenile proportion and veneer lay-up to the quality of the resulted samama LVL. The veneer thicknesses were 1.5 and 3.0?mm. Juvenile proportions were arranged in five levels, which were 100% of juvenile veneer, 100% of mature veneer and combination of both juvenile and mature with juvenile proportion of 14%, 43% and 71%. Two veneer lay-up used in this study were loose side met loose side and tight side met loose side. The result of the study showed various specific gravity of LVL by different proportions of juvenile. This factor also affected the other physical traits. Shear strength of the LVL was equal to the solid wood, yet MOE and MOR were affected by juvenile proportion and veneer lay-up. LVL developed from 100% of mature veneer exhibited the highest MOE and MOR, yet no significant difference was noted in MOE and MOR between LVL 100% of juvenile and other tested juvenile proportions.     

Effect of tool angles on the chips generated during milling of wood by straight router-bits

 The effect of tool angles on the shapes of chips generated by parallel-to-grain and end-grain milling was explored for China fir and maple under fixed spindle and feed speeds and cutting depth. The milling path was up-milling by straight router-bits with a diameter of 12 mm. The chip shapes could be distinguished as five types: spiral, splinter, flow, thin, and granules or powder. The flow and thin chips were generated most often (on a weight percentage basis) for all tool angles investigated for parallel-to-grain and end-grain milling of China fir and maple. More granule chips were produced with parallel-to-grain milling than with end-grain milling for both woods. The measured chip thickness (t′) was thicker than the calculated thickness (t _max). Thicker and longer maple chips were produced by end-grain milling than by parallel-to-grain milling. The tool geometries of 40°/15° (sharpness of the angle–rake angle), 50°/15°, and 60°/15° for China fir and 40°/25°, 50°/5°, and 60°/5° for maple produced relatively more flow chips with parallel-to-grain milling. Furthermore, the tool geometries of 40°/5°, 50°/15° and 60°/25° produced more flow chips (weight percentage) by end-grain milling of China fir and maple. Received: May 23, 2001 / Accepted: June 28, 2002 Acknowledgment This study was supported by a grant from the National Council of Science, Taiwan (NSC89-2313-B-415-011).     

覆土厚度对油松出苗的影响

为了解不同覆土厚度对油松出苗率和出苗指数的影响,进行了油松育苗随机区组试验。结果表明:当播种深度为0.5cm时,出苗率和出苗指数最高;随着覆土厚度的增大,幼苗出苗率也相应降低,当覆土厚度超过2.5cm时,几乎不能出苗。建议生产中油松播种覆土厚度保持在0.5~1.0cm。