静动荷载作用下小麦剪切特性试验研究

为研究静动载荷作用下的粮食剪切特性,利用开发的新型粮食动直剪仪,设计了孔隙率为39%、36%、33%以及竖向压力为50、100、150、200k Pa下的小麦单调直剪、往复剪切及往复后单调直剪试验,研究了小麦静动力剪切特性,并对比分析了小麦单调直剪与往复后单调直剪的强度、变形结果。研究结果表明:单调直剪试验中,同一孔隙率下,竖向压力越大,其软化现象越明显,剪胀现象越不明显,剪胀角越小,竖向压力为50、100、150、200k Pa下对应的剪胀角分别为4.5°、3.6°、2.4°、0.7°;同一竖向压力下,随着小麦孔隙率减小,其软化现象越明显,内摩擦角也越大,孔隙率为39%、36%、33%的小麦对应的内摩擦角分别为22.2°、24.4°、28.1°。剪胀角也随着小麦孔隙率减小而增大,对应的剪胀角分别为1.3°、3.6°、9.9°;往复剪切试验中,孔隙率越小,小麦往复剪切软化现象越明显,剪缩现象越不明显,最大剪缩量越小,孔隙率为39%、36%、33%的小麦对应的最大剪缩量分别为2.77、1.74、1.15 mm。往复后单调直剪与单调直剪试验结果对比表明,往复后单调直剪的小麦抗剪强度明显增大,其剪胀现象更明显,最大剪胀量也增大。试验结果可为粮仓结构安全性设计,尤其是粮仓结构动力分析提供依据。     

Effects of entrance design on catch efficiency of arabesque greenling traps: a field experiment in Matsumae, Hokkaido

ABSTRACT:   A field experiment was conducted in the Matsumae area of Hokkaido, Japan, during June and July 2002, to investigate the effects of different entrance designs on the catch efficiency of fish traps by fishing with commercial traps (entrance inclination angle [α] = 37°; funnel length of entrance [ L _f ] = 22 cm) and experimental traps. The experimental traps were of the same size and similar design as commercial traps, with different entrance inclination angles (trap E1: α = 46°; E2: α = 27°; E3: α = 0°; all L _f  = 22 cm) or funnel lengths (E4: α = 37°, L _f  = 8 cm). In total, 2200 fish during 200 trap hauls were captured. The catch was significantly higher using both traps E2 and the commercial trap than with trap E3 ( P  < 0.05), and the catch of trap E2 was higher than that of the commercial trap. There were no significant differences in mean fish body length or the frequency distributions of body length among trap types (E1, E2, E3 and commercial). The funnel length of the entrance also affected the catch of traps. Trap E4 had significantly higher catches than the commercial trap ( P  = 0.04) when traps were deployed for a 1-day soak time. Fish body length frequency distributions did not differ between trap E4 and the commercial trap. The results showed that catch can be greatly affected by trap entrance designs.     

Basic handling characteristics of wood fuels: Angle of repose,friction against surfaces and tendency to bridge for different assortments

Basic handling characteristics were measured for sawdust, fuel pellets, fuel chips, hog fuel and chunkwood. The aim was to find relations between the basic handling characteristics and easily measurable fuel properties to facilitate the design of feeding systems in heating plants. The angle of repose was 25–55° and increased with the increasing ratio of particle length to thickness and with the increasing content of hooked or long particles. The angle of static friction, 10–40°, was affected more by the kind of surface than the fuel and followed the ascending order: coated plywood, urethane rubber, particle board, stainless steel, concrete and rubber belt conveyor. The tendency to bridge varied considerably and increased with greater content of hooked or long particles, a deeper fuel bed depth over the opening and a higher moisture content. The results indicate that more attention should be paid to the particle shape.     

坛紫菜耐高温品系的选育与海区中试

利用人工诱变和体细胞再生技术,选育出可在30℃下生长的坛紫菜耐高温品(Q-1),实验结果表明:(1)在高温(28℃和30℃)下培养15d,Q-1品系的壳孢子成活率分别为76.8%和60.1%,分裂率分别为100%和83%;而对照组野生型(WT)品系的壳孢子成活率分别为15.9%和6.7%,分裂率分别为90.4%和63.8%。Q-1品系的壳孢子成活率和分裂率均远高于WT品系。(2)在常温(24℃)下培养35d的Q-1和WT品系壳孢子苗,在24℃、28℃和30℃组中再分别培养25d,Q-1品系的苗平均体长分别增加了19.4、10.8和2.8倍,而WT品系的苗平均体长分别只增加了7.3、1.7和0.9倍;Q-1品系的苗平均体长分别为WT品系的2.5、5.8和1.9倍。另外,在28℃和30℃中培养15d的WT品系幼苗发生了大面积腐烂;而Q-1品系幼苗没有出现任何烂苗迹象,表现出较好的生长。Q-1品系在海区中试中也表现出很好的耐高温特性。2008年秋季,坛紫菜采苗后遇到了长时间的高温天气,当地传统养殖的坛紫菜野生种发生了大规模腐烂与脱苗,产量大幅度减少;而Q-1品系的苗仍然维持良好的生长势头,没有出现烂苗,取得了高产。由此证实,Q-1品系是既能较快生长又耐高温的品系,有很大的生产应用价值。     

木材表面非极性化原理的研究 Ⅱ.木材与苯乙烯接枝共聚过程中化学官能团和表面极性的变化

通过对杉木、杨木木材及其主要成分在与苯乙烯接枝共聚反应过程中化学官能团及临界表面张力变化的研究,探讨了木材各化学组成在接枝共聚过程中的反应性能和对木材表面极性的影响。研究表明:木材可与苯乙烯发生接枝共聚反应,反应只在木素和苯乙烯之间进行。木材与苯乙烯接枝共聚可降低木材临界表面张力,即降低木材表面自由能,从而有效地改善木材的极性。     

Morphological Basis of Resistance in Cotton to the WhiteflyBemisia Tabaci

The morphological basis of resistance to the whiteflyBemisia tabaci Genn. (Aleyrodidae: Hemiptera) was studied. The plant characters examined were leaf area, thickness of leaf lamina, hair density, hair length, angle of insertion of leaf hair, and density of gossypol glands. Hair density and leaf thickness were positively correlated with the population ofB. tabaci, and a positive correlation was obtained between the adult whitefly population and gossypol glands on stem internodes. Cotton genotype USA-22 (sparsely hairy) was found to be more tolerant toB. tabaci than was genotype USA-13 (velvety hairy). The use of thinner and glabrous leaved cotton varieties is suggested to minimize the whitefly menace in cotton.     

冬小麦春生叶片伸展程度与幼穗分化关系的再讨探

试验采用农大139等5～6个冬小麦品种观察表明:春一、二叶伸出4～5 cm 左右时,分别与单棱、二棱两个穗分化始期相对应;春三、四、五、六叶伸出9～10 cm 左右时,分别与小花、雌雄蕊、药隔形成和覆盖器官伸长四个穗分化始期相对应。一般趋势为当每片春生叶片伸出2/5～3/4全长时,分别可与相应的穗分化始期相对应。四分体的分化都在旗叶展开以后;当花药黄绿色、长度为1.5(±0.1)mm 时,发生四分体的机率可在80%以上。     

大型烟囱垂直度偏差的测量方法

大型烟囱一般是工业厂区的高耸建筑，经过几十年的使用，需要重新鉴定其结构可靠性，烟囱的垂直度，是一个很重要的安全指标。由于烟囱为圆形截面，不能直接测量，而且工业厂区内建筑较多，通视条件较差，给测量带来很多困难。通过测量烟囱上下两个标高处的外轮廓水平角度，换算出上下标高处的相对水平偏移角，再用角度交汇方法求出最终偏移值，经过精度分析，完全满足工程精度要求。本文以上海某大型烟囱为例，提出了对已有烟囱垂直度偏差的检测方法，以用于大型服役烟囱的监测。     

Effects of water state of soil on ecological boundary of leaf Surface ofpopulus davidiana

The effect of water state of soil on eco-boundary over leaf surface was disscussed by takingPopulus davidiana as experimental material. The results show that to change soil water state by some methods was to adjust and control the forming quality of eco-boundary in fact. The plant in good water condition must be accompanied by thinner eco-boundary. This eco-boundary is beneficial to exchange and flow of the substances between plant and environment. Suifenhe Animal and Plant Quarantine Bureau The study was supported by The Chinese Natural Science Foundation, No. 39470136 (Responsible Editor: Chai Ruihai)