高产抗逆大豆新品种石豆12号的选育

石豆12号是由石家庄市农林科学研究院以石豆1号为母本,汾豆63为父本经有性杂交选育而成。2015-2016年参加河北省夏播大豆区域试验,平均产量3 284.0 kg·hm~(-2),较对照冀豆12增产6.22%。2016年参加河北省夏播大豆生产试验,平均产量3 229.7 kg·hm~(-2),较对照冀豆12增产4.91%。2017年通过河北省农作物品种审定委员会审定,准予推广。石豆12号的主要特点是高产、抗病、抗倒伏,适宜在河北省中南部夏播种植。     

高蛋白高产大豆新品种石豆11号的选育

石豆11号是由石家庄市农林科学研究院以化诱446为母本,冀豆4号为父本经有性杂交选育而成。2014-2015年参加河北省夏播大豆区域试验,平均产量3 093.9 kg·hm~(-2),较对照冀豆12增产2.51%。2016年参加河北省夏播大豆生产试验,平均产量3 108.0 kg·hm~(-2),较对照冀豆12增产0.87%。2017年通过河北省农作物品种审定委员会审定,准予推广。石豆11号的主要特点是高蛋白(45.79%)、高产、抗倒伏,适宜在河北省中南部夏播种植。     

杂交中稻分蘖期干旱对产量的影响及其缓解技术研究

以杂交中籼迟熟组合宜香优300和川谷优642为材料,在海南陵水旱季大田条件下,研究了分蘖期干旱处理对中籼迟熟杂交稻产量的影响及其缓解技术。结果表明,干旱会造成水稻减产,主要原因是有效穗数和穗粒数显著降低;干旱期间平均田间持水量可作为预测产量损失度的依据;分蘖期干旱处理下,稻谷产量随着施氮量和移栽密度的增加而增加,适当提高本田施氮水平和移栽密度,可显著降低分蘖期干旱的产量损失度。     

上海水稻精量机械穴直播技术研究与应用

以上海地区主推水稻品种为材料,在精量机械穴直播条件下,开展了不同类型水稻品种的小区试验和示范,明确了精量机械穴直播水稻的生育特性、抗倒伏性、群体建成和产量表现,并分析了采用水稻精量机械穴直播后土壤的微生物群落结构的变化和水稻生产经济效益。试验示范结果表明,精量机械穴直播水稻生育期明显缩短,单株分蘖力强,群体结构合理,穗粒结构协调,干物质积累多,抗倒能力较强,增产优势明显,节本低耗,生产效率显著提高,是目前极具生产潜力的一种新型高效低耗种植模式,适合上海都市农业发展的需求,也顺应了水稻低碳种植发展趋势,具有广阔的应用前景。     

苏粳815机插高产形成特点及其配套精确定量栽培技术

通过综合高产试验和机插行株距规格与氮肥组合试验,分析了苏粳815高产形成的特点,明确了其高产产量结构及其形成的主要生育指标,提出了目标产量650~700 kg/667 m~2相配套的精确定量栽培技术。     

Impact of sampling and storage technique,and duration of storage,on the composition of fresh grass when analysed using near‐infrared reflectance spectroscopy

The objective of this study was to examine the effect of sampling technique (pluck or cut), storage duration (immediate analysis, 24‐h or 48‐h), storage temperature (ambient or chilled) and storage conditions (air present, air excluded or breathable) on the composition of fresh grass sampled from a sward managed to simulate grazing. Treatments were repeated across four sampling dates, with grass samples stored in grip seal bags prior to analysis using near‐infrared reflectance spectroscopy. Grass sampled by ‘pluck’ had a higher crude protein and ME content, and a lower acid detergent fibre (ADF) content, compared to that sampled by ‘cut’. Grass stored for 48 h had a lower water soluble carbohydrate (WSC) and ME content and a higher ADF content than for immediate analysis. Samples stored for 24 h did not differ from immediate analysis. Grass stored at ambient temperature had a lower WSC and ME content compared to immediate analysis. Grass stored under ‘breathable’ conditions had a lower ME content and higher ADF content than immediate analysis or samples stored with air present or air excluded. It is recommended that grass for analysis should be sampled by cutting, stored chilled (4°C) in a sealed bag to minimize exposure to oxygen and analysed within 24 h of harvest.     

水力空化强化壳聚糖抗菌微球制备工艺的研究

为研究涡流产生的水力空化效应对壳聚糖抗菌微球包封率的影响,探讨水力空化强化壳聚糖抗菌微球制备的最佳工艺,在单因素试验的基础上,通过五因素三水平的响应面分析法研究了涡流出口压力、空化时间、壳聚糖浓度、甲基异噻唑啉酮(MIT)浓度、三聚磷酸钠(TPP)浓度对壳聚糖抗菌微球包封率的影响。结果表明,响应面法优化的最佳工艺参数为:涡流出口压力0.3 MPa,空化时间15 min,壳聚糖浓度3.0 g/L,MIT浓度0.6 mmol/L,TPP浓度2.5 g/L,载抗菌剂的壳聚糖微球包封率达(50.17±1.95)%,说明水力空化适合用于强化壳聚糖抗菌微球的制备工艺。     

玉米波杂饮料自然发酵工艺研究

以玉米粉为原料,在单因素试验的基础上,通过正交试验优化玉米波杂饮料的制作工艺。结果表明,玉米波杂饮料自然发酵的最佳工艺条件为:酶制剂添加量3.0%,煮制时间50 min,第2次发酵时间12 h,发酵温度35℃。此条件下制得的玉米波杂饮料总糖含量6.43 g/L,总酸含量2.73%,酒精含量2.60%(V/V),感官品质得分95分,饮料呈米黄色,泡沫洁白细腻,酒香味浓郁,有愉快的偏酸味和较强的杀口感。     

迎春花试管培养技术的研究

旨在研究不同培养条件对迎春花不定芽再生和生根状况的影响,并筛选出最适培养条件。以迎春花带芽茎段为材料,通过诱导愈伤组织、愈伤组织分化新芽、芽生根等步骤建立迎春花离体快速繁殖体系。研究结果表明,适合迎春花愈伤组织诱导的培养基为WPM+3.0 mg/L6-BA+0.5 mg/LNAA,诱导率高达100%;适合迎春花芽伸长诱导的培养基为WPM+2.0 mg/L6-BA+0.5 mg/LNAA,诱导率达56.8%;适合迎春花生根诱导的培养基为1/2 WPM+0.5 mg/L NAA,生根率高达85%,根系发达,试管苗生长健壮。培养条件为光照强度1500 lx,光照时间12 h/d,温度25℃。植物生长调节剂种类及质量浓度对迎春花不定芽的出芽时间和再生率以及生根率有明显影响。     

Modelling optimal timing and frequency of insecticide sprays for knockdown in preparation for other control measures

A modelling investigation was conducted into optimizing the number of sprays and inter-spray interval to reduce an insect population to a low level, for example, prior to pheromone trapping or the release of sterile males. The model population was age-structured and density-dependent. If spray mortality is 100% for each spray, then the ideal spraying schedule is easily determined from the durations of the various life stages. For spray mortality of less than 100%, a simulation was used to determine optimal spraying schedules. Relative length of the larval period, fertility rate and age to first oviposition were found to be the most important biotic parameters for this determination. Their importance is magnified as spray mortality decreases. The stage targeted by sprays and the percent mortality caused by each spray are also important in determining the required number of sprays. Using medfly (Ceratitis capitata Wiedmann) biotic parameters as an example when the spray targets adults, it appeared that neither the stage at which density-dependent mortality takes effect, nor the form of the adult survivorship curve are important in determining the optimal spray schedule.