利用正交表优化设计自压式低压管灌系统

在渠灌区,研究充分利用地形落差情况下自压式低压管灌树状管网的优化设计,对降低投资有重要意义。管网优化设计应将管网布置优化和管径优化结合进行设计。本文利用正交表及其优化分析原理,同时结合应用非线性数学规划法优化管径,不仅可得到所有管网布置组合中的最优方案,还可视实际需要得到若干次优方案。该优化设计法计算工作量较小,简单可靠且实用。     

Sap flow in ‘Hass’ avocado trees on two clonal rootstocks in relation to xylem anatomy

The rates of sap flow and xylem vessel features were studied in two-year-old nongrafted and grafted avocado (Persea americana Mill.) trees. Daily sap flow rates were measured with heat and balance stem gauges in clonal Duke 7 (D7) and Toro Canyon (TC) trees and ‘Hass’ clonal scions grafted onto clonal D7 (H/D7) and TC (H/TC) rootstocks. Vessel features as size, number and total vessel area were determined histologically in the stem of the scion and rootstock and the roots of the grafted trees. Significant differences in the sap flow rate were found among the rootstocks, where D7 had a 29% higher sap flow rate than did TC (grafted and nongrafted trees). There were no differences among xylem vessel features in the stems of any of the varieties. However in the roots, D7 had wider and fewer vessels then TC do. Also, D7 had a 19% higher total vessel area than TC. These results suggest that the differences in water consumption of ‘Hass’ on different rootstocks may be associated with differences in the efficiency of the roots to absorb water across conductive tissue which may be linked to differences in the area of xylem vessels in the root.     

Yield and water-production functions of two durum wheat cultivars grown under different irrigation and nitrogen regimes

Wheat (Triticum durum L.) yields in the semi-arid regions are limited by inadequate water supply late in the cropping season. Planning suitable irrigation strategy and nitrogen fertilization with the appropriate crop phenology will produce optimum grain yields. A 3-year experiment was conducted on deep, fairly drained clay soil, at Tal Amara Research Station in the central Bekaa Valley of Lebanon to investigate the response of durum wheat to supplemental irrigation (IRR) and nitrogen rate (NR). Three water supply levels (rainfed and two treatments irrigated at half and full soil water deficit) were coupled with three N fertilization rates (100, 150 and 200 kg N ha⁻¹) and two cultivars (Waha and Haurani) under the same cropping practices (sowing date, seeding rate, row space and seeding depth). Averaged across N treatments and years, rainfed treatment yielded 3.49 Mg ha⁻¹ and it was 25% and 28% less than half and full irrigation treatments, respectively, for Waha, while for Haurani the rainfed treatment yielded 3.21 Mg ha⁻¹, and it was 18% and 22% less than half and full irrigation, respectively. On the other hand, N fertilization of 150 and 200 kg N ha⁻¹ increased grain yield in Waha by 12% and 16%, respectively, in comparison with N fertilization of 100 kg N ha⁻¹, while for cultivar Haurani the increases were 24% and 38%, respectively. Regardless of cultivar, results showed that supplemental irrigation significantly increased grain number per square meter and grain weight with respect to the rainfed treatment, while nitrogen fertilization was observed to have significant effects only on grain number per square meter. Moreover, results showed that grain yield for cultivar Haurani was less affected by supplemental irrigation and more affected by nitrogen fertilization than cultivar Waha in all years. However, cultivar effects were of lower magnitude compared with those of irrigation and nitrogen. We conclude that optimum yield was produced for both cultivars at 50% of soil water deficit as supplemental irrigation and N rate of 150 kg N ha⁻¹. However, Harvest index (HI) and water use efficiency (WUE) in both cultivars were not significantly affected neither by supplemental irrigation nor by nitrogen rate. Evapotranspiration (ET) of rainfed wheat ranged from 300 to 400 mm, while irrigated wheat had seasonal ET ranging from 450 to 650 mm. On the other hand, irrigation treatments significantly affected ET after normalizing for vapor pressure deficit (ET/VPD) during the growing season. Supplemental irrigation at 50% and 100% of soil water deficit had approximately 26 and 52 mm mbar⁻¹ more ET/VPD, respectively, than those grown under rainfed conditions.     

Simulation of transpiration, drainage, N uptake, nitrate leaching, and N uptake concentration in tomato grown in open substrate

Free-drainage or “open” substrate system used for vegetable production in greenhouses is associated with appreciable NO₃⁻ leaching losses and drainage volumes. Simulation models of crop N uptake, N leaching, water use and drainage of crops in these systems will be useful for crop and water resource management, and environmental assessment. This work (i) modified the TOMGRO model to simulate N uptake for tomato grown in greenhouses in SE Spain, (ii) modified the PrHo model to simulate transpiration of tomato grown in substrate and (iii) developed an aggregated model combining TOMGRO and PrHo to calculate N uptake concentrations and drainage NO₃⁻ concentration. The component models simulate NO₃⁻-N leached by subtracting simulated N uptake from measured applied N, and drainage by subtracting simulated transpiration from measured irrigation. Three tomato crops grown sequentially in free-draining rock wool in a plastic greenhouse were used for calibration and validation. Measured daily transpiration was determined by the water balance method from daily measurements of irrigation and drainage. Measured N uptake was determined by N balance, using data of volumes and of concentrations of NO₃⁻ and NH₄⁺ in applied nutrient solution and drainage. Accuracy of the two modified component models and aggregated model was assessed by comparing simulated to measured values using linear regression analysis, comparison of slope and intercept values of regression equations, and root mean squared error (RMSE) values. For the three crops, the modified TOMGRO provided accurate simulations of cumulative crop N uptake, (RMSE = 6.4, 1.9 and 2.6% of total N uptake) and NO₃⁻-N leached (RMSE = 11.0, 10.3, and 6.1% of total NO₃⁻-N leached). The modified PrHo provided accurate simulation of cumulative transpiration (RMSE = 4.3, 1.7 and 2.4% of total transpiration) and cumulative drainage (RMSE = 13.8, 6.9, 7.4% of total drainage). For the four cumulative parameters, slopes and intercepts of the linear regressions were mostly not statistically significant (P < 0.05) from one and zero, respectively, and coefficient of determination (r²) values were 0.96-0.98. Simulated values of total drainage volumes for the three crops were +21, +1 and −13% of measured total drainage volumes. The aggregated TOMGRO-PrHo model generally provided accurate simulation of crop N uptake concentration after 30-40 days of transplanting, with an average RMSE of approximately 2 mmol L⁻¹. Simulated values of average NO₃⁻ concentration in drainage, obtained with the aggregated model, were −7, +18 and +31% of measured values.     

高精度气动比例压力阀设计与特性分析

设计了一种两级阀芯活塞式结构的以比例电磁铁为控制元件,采用电反馈闭环控制的高精度气动比例压力阀。该阀输出压力在0.6MPa内连续可调,且稳态精度可达0.25 kPa。建立了比例阀完整的非线性动态模型,分析了主要物理和几何参数对系统动态特性和控制性能的影响;构建了输出因子调整的模糊自适应比例加积分控制器,并利用ATmega16单片机实现了压力在设定范围内的快速高精度控制。实验结果表明,该阀在设计压力范围内具有良好的压力和流量特性;和传统PI算法相比,输出因子调整的模糊自适应算法在改善系统响应和控制稳定性的同时,显著提高了稳态控制精度,具有较高的效率和鲁棒性。     

大型竖井式贯流泵装置的数值模拟与性能预测

基于三维不可压流体的雷诺时均方程和Spalart-Allmaras方程湍流模型,采用SIMPLEC算法,对大型竖井贯流式泵站的全流道进行数值模拟,分析流道的流态和叶轮的静压分布规律,揭示竖井式贯流泵流道流体的流动机理;对泵装置的流量和效率进行预测,并与模型试验结果比较分析.结果表明：出水流道内的流动为轴向流动与环向旋转的螺旋形合运动;叶片的静压分布呈现较为明显的规律,升力面的静压整体上较吸力面要高,且叶片吸力面的静压等值线分布较升力面密.性能预测结果和模型试验结果吻合较好.     

半室外环境两相流低压雾化降温数值分析

为了改善夏季半室外空间的环境舒适度,研究了一种节能环保的两相流低压雾化降温技术.利用CFD软件FLUENT对其降温进行了分析,结合半室外环境的气象条件,获得了20μm和40μm两种粒径液滴对降温效果的影响规律.根据半室外环境中的人群活动特征,对其降温效果进行了初步分析.结果表明：在半室外环境中,采用两相流低压雾化降温可以达到较好的降温效果,在1.7 m及1.2 m等两种人体感知区域范围内,采用20μm和40μm两种粒径的细水雾最高温度降幅可达3.5℃,有明显的降温感觉;采用两相流低压雾化降温,不会引起局部环境中相对湿度的明显增加,人体不会感觉到闷热潮湿.两种粒径的细水雾均能完全蒸发,降温增湿的幅度和范围基本相同,没有明显区别.     

不同大气压下直喷式柴油机的性能研究

在大气模拟试验台架上对运行在不同大气压下的直喷式柴油机的经济性、动力性、烟度及噪声特性进行对比试验研究与分析。试验结果表明:随着大气压力的减少,柴油机有效燃油消耗率、小时燃油消耗量、排气温度、烟度及噪声声功率增加,动力性下降。     

PLC及变频调速恒压喷灌系统的设计

针对喷灌系统受作业区域需水量的影响造成系统喷头不能稳定可靠工作的问题,结合工程实例,提出了利用PLC及变频器来实现温室喷灌系统恒压供水.给出了变频调速恒压供水系统原理图,并进行了系统的主电路设计和软件设计.阐述了利用上位机、PIC、变频器、压力变送器、电机-水泵系统等组成的恒压供水系统,能按照设定的工作压力,实时切换泵组投入工频或变频状态运行,达到恒压供水的目的.系统能通过上位机实现下位机的控制参数的设定、系统的实时监测、数据管理等任务,自动化程度高.应用表明,系统实现简单,操作方便,运行稳定,可靠,且具有较好的节能效果.     

液压技术在油菜生产机械中的应用

液压技术在农机中的应用日益广泛,油菜生产机械化装备近几年在国家大力支持下有了较快发展,由于液压技术的优势,在油菜机械装备中也应用越来越多,文章就目前我国油菜生产机械中所应用的液压技术进行了综述和研究。