基于LDAR技术的炼油装置VOCs泄漏损失评估

Leak Detection and Repair（LDAR）技术是对工业生产活动中工艺装置泄漏现象进行发现和维修的一种技术。以国内某炼油装置设备管阀件泄漏的挥发性有机化合物（VOCs）为例,应用LDAR技术开展炼油装置泄漏检测并统计数据,计算VOCs泄漏损失量。结果表明：泄漏部位主要是阀门盘根,法兰、丝堵、接头等连接件,泵轴密封,排凝、放空等开口管道;通过泄漏损失量计算可知,该原油加工能力为500×104 t/a的炼油企业,每年泄漏的挥发性有机化合物约400 t/a,其中泄漏检测结果不低于10 000μmol/mol的泄漏源在炼油装置泄漏损失评估中起主要作用,是设备泄漏造成损失的重要组成部分。同时,对企业泄漏维修效果进行了评估,该企业炼油装置可以降低50%以上的VOCs泄漏损失量。（图6,表2,参8）     

刺梨花粉管萌发的荧光显微观察

花粉管作为连接柱头与胚囊的唯一结构,是外源DNA导入的通道。因此,必须首先形成花粉管通道,才能进行外源DNA的导入。本研究利用醋酸洋红染色对刺梨雌蕊、雄蕊进行显微观察,并在人工授粉后的0．5h、1h、3h、6h、10h、12h、14h、16h、18h、20h、24h和30h不同时期取其雌蕊,用苯胺蓝染色后进行荧光显微观察。研究结果初步探明了刺梨人工授粉的最佳时期在花蕾露红期;其花粉管通道从人工授粉后10h左右开始萌发,到18h左右完成萌发,花粉管萌发完成后的2～9h是利用花粉管通道法介导刺梨遗传转化的最佳时期。本研究结果将为花粉管通道法介导刺梨遗传转化技术体系的建立提供基础资料。     

月季的栽培及养护管理

月季别名月月红,花朵颜色艳丽,香味浓郁,深受大家的喜爱,在市场上占据重要的地位。近年来,我国对其进行不断的探索研究,取得进一步的认识。主要针对月季的繁殖方法、栽培管理及养护等几方面进行分析讲解。     

拖拉机旋流管式拔尘空滤系统设计

根据市场反馈的问题结合试验结果,对发动机空滤进气系统进行了改进设计,通过利用排气管废气压力,设计了使用旋流管式拔尘的进气结构,从而有效提高了空滤效果。对我公司TL拖拉机使用的该新型进气系统结构的设计进行简要介绍。     

基于植株类农作物根施技术产品的开发

工厂化农业是一种受控农业,对作物湿度的变化要求比自然农业大得多。为此,在市场调研的基础上,对现有可控设施环境内植株类农作物根施水肥药等技术中的同类型产品进行了对比研究,运用活塞连杆机构设计并开发了一种新型农用机具,使其密封、安全、通用性能更趋合理。其不但制造成本低廉,而且操作简便,经济实用,具有良好的推广前景。     

利用花粉管通道技术将抗虫基因导入大豆的研究

利用花粉管通道技术，将Bt基因导入大豆品种。对132株D1代植株进行PCR检测，得到5株阳性转化植株。再将获得的5株D1代阳性转化植株的种子放在温箱中发芽，提取DNA进行检测，结果得到2株D2代稳定遗传的阳性转化植株。用X－Glue溶液对转Bt基因132株D1代植株进行检测，结果没有发现阳性反应。另外，本实验还采用荧光制片方法从植物组织结构的角度证明利用花粉管通道方法导入外源基因的可行性，并提出花粉管通道方法操作的最佳时间为授粉后6－20h。     

Pollen tube growth in crosses between Porteresia coarctata and Oryza sativa

Summary Comparative study with fluorescence microscopy revealed that the pollen tubes of the self-pollinated rice variety BR-9 reached the ovary within 75 min after pollination. In P. coarctata it took 150 min. In the cross between P. coarctata and BR-9, pollen tubes reached the ovary in 165 min but seed setting was not observed. In the cross between BR-9 and P. coarctata, small and deformed pollen tubes were formed and they failed to grow through the stylodium.     

Effects of gamma irradiation on in vitro pollen germination of different Cucumis species

Summary Pollen grains of 14 Cucumis accessions were irradiated with 0, 1, 2, 3 or 4 kGy acute gamma rays and germinated in vitro directly afterwards. Pollen germination was significantly reduced by increasing irradiation dose for all species, except C. melo var. agrestis. Pollen tube growth was generally reduced likewise. Pollen of two C. anguria subspecies was most sensitive to irradiation. Sensitivity of the pollen with respect to pollen tube growth in relation to irradiation dose was inversely related to total DNA amount per nucleus. In vitro germination was not related to DNA amount per nucleus. Results show that the examined Cucumis species, especially C. melo var. agrestis, are sufficiently resistant to irradiation to be used as donor species for in vivo egg cell transformation of the cucumber.     

Evaluation of the High-temperature Tolerance of Floral Organs in Upland Cotton (Gossypium hirsutum L.)

The development of floral organs in upland cotton (Gossypium hirsutum L.) is related to squares and yield formation. The germination percentage of pollen grains, the rate of anther dehiscence and the length of filaments and styles of 11 upland cotton cultivars were determined before and after high-temperature periods by pollen grain culture in vitro. We aimed to analyze the effects of high temperature on pollen germination in styles and on stamen characteristics. The number of pollen tubes in styles and cytological structure of anthers were also tested under simulation of high temperatures by paraffin sectioning of cotton anthers. We found that the germination percentage of pollen grains and rate of anthers dehiscence of Ke 1053, Simian 4 and the male parent of Xiangzamian 3 were greater than those of other cultivars under high field temperatures. There was no significant difference in the length ratio of filaments and styles and filaments length between 11 upland cotton cultivars under high field temperatures. After high-temperature periods in the field, the difference in pollen germination percentage, anther dehiscence, style and filament length between the 11 cultivars was not significant. The number of pollen tubes in Ke 1053, Simian 4 and the male parent of Xiangzamian 3 was greater than those of other cultivars under the high simulation temperature. The number of deformed pollen grains in anthers was also less than those of other cultivars. These results were consistent with the field conditions. This experiment indicated that germination percentage of pollen grains and the rate of anther dehiscence are useful as indicators for screening high-temperature tolerance. The length ratio of filaments and styles and the filaments length could be used as parameters for screening high-temperature tolerance cultivars.