祁连山水源涵养林综合效能的计量研究

以马克思级差地租理论,建立了祁连山水源涵养林综合效能的评价模型:E=E_d+E_e+E_s;以E与生产投资I的比值为计量水源林的效能指数T,T=E/I。并以祁连山寺大隆森林生态定位研究站实测资料和社会调查数据为计量评价参数,确定其经济评价指标体系和计量系统。结果表明:祁连山水源涵养林综合效能指标为11.93;其中生态效能和社会效能分别是直接经济效能的4.51倍和6.05倍。说明祁连山水源涵养林现行的保护、发展和综合利用的经营方针是正确的。建议河西各受益部门应按水资源效能总收入的0.5％缴作水源林再生产费,以确保国民经济建设的长远发展。     

用简易诊断法检查判断液压系统各元件的工作性能

故障的排除首先在于判断，目前基层维修网点大多数没有检测仪器和设备，出了故障乱拆乱卸，导致液压元件工作失灵，甚至整车液压系统瘫痪。拖拉机液压系统产生故障的主要原因是液压元件工作性能恶化引起的。为此，介绍了在没有检测仪器和设备的条件下，如何应用简易诊断法检查判断各液压元件的工作性能。     

手动比例复合阀在中高压液压绞纲机中的应用

中高压液压技术在海洋捕捞机械—绞纲机中的使用推动了我国渔业机械的发展,手动比例复合阀在中高压液压技术上的应用则大大加快了液压绞纲机在国内渔业生产中的普及。目前,我国浙江、江苏、福建、广东和山东等省沿海渔民使用的绞纲机普遍采用带手动比例复合阀的液压系统。为此,对手动比例复合阀换向、溢流、调速集成等功能进行了分析。     

农机液压技术的应用与发展

液压技术的应用已成为现代化农业机械的典型标志。为此,介绍了农机液压技术的应用现状;并根据科学技术的发展,简要分析了农机液压技术的发展趋势。     

江汉平原水稻白叶枯病菌致病型的变异研究

 从水稻和稻田周围常见的10种杂草上来集梨孢属菌株,以涂沫法作交互接种,分离自牛筋草、狗尾草、法氏狗尾草、李氏禾、罗氏草、铺地黍、稗和马唐的梨孢菌与分离自水稻的梨孢菌可以交叉侵染其寄主,茭白和碎米莎草梨孢菌与稻梨孢菌不能交互侵染;自然诱发条件下来自牛筋草和狗尾草的梨孢菌与来自水稻的梨孢菌对其寄主同样发生交叉侵染。直接从杂草寄主上分离的梨孢菌株对水稻的致病性较弱,接种到水稻感病品种发病后再分离的菌株,对水稻致病性增强,对原寄主的致病性基本保持不变。推断稻瘟病区稻田周围牛筋草、狗尾草、法氏狗尾草、李氏禾、罗氏草、铺地黍、稗和马唐等杂草寄主上的梨孢菌在稻瘟病菌的积累和传播方面具有作用。     

中国18 省市番茄晚疫病菌生理小种的鉴定

 利用5 个含有不同单显性抗番茄晚疫病基因的番茄材料Ts19、Ts33、W1Va700、LA1033 和L3708为鉴别寄主, 对我国18 省、市、自治区的番茄晚疫病菌201 个纯化分离物进行了生理小种鉴定。结果共鉴定出8 个小种, 即生理小种T0、T1、T1 ,2 、T1 ,2 ,3 、T1 ,2 ,3 ,4 、T1 ,4 、T1 ,2 ,4 和T3。其中, 小种T1 和T1 , 2是主流小种, 地理分布最广和发生频率最高, 分别在13 和11 个省市出现, 占样本总数的28.8 %和28.4 %;其次是小种T0 和T1 ,2 ,3 , 分别在8 和7 个省市出现, 分别占1819 %和819 %; 再其次是小1 ,2 ,3 ,4 , 在4个省市有发生, 占710 %; 小种T1 ,2 ,4 、T1 ,4 和T3 分布均少, 仅在1～2 个省市发生, 分别占3.0 %、2.5 %和2.5 %。这是我国的首次报道, 为番茄晚疫病的抗源材料筛选和抗病育种提供了病理学依据。     

Impact on soil physical properties of using large-grain legumes for catch crop cultivation under different tillage conditions

In Central Europe, various plant species including large-grain legumes and their mixtures are grown as catch crops, particularly between grains harvested early and subsequent summer crops. This article investigates the question of how soil structure in the topsoil is influenced when catch cropping with large-grain legumes (experimental factor A: without catch crop, with catch crop) under different ploughless tillage conditions during catch crop seeding (experimental factor B: deep tillage/25–30 cm, shallow tillage/8–10 cm). Five one-year trials were performed using standard machinery at various sites in Germany. Soil core samples extracted from the topsoil in the spring after catch crop cultivation served to identify air capacity, saturated hydraulic conductivity and precompression stress. The above-ground and below-ground biomass yields of the catch crops were also determined at most of the sites. In addition, the soil compaction risk for the working steps in the experiments was calculated using the REPRO model.The dry matter yield of the catch crops varied considerably between the individual trial sites and years. In particular, high levels of dry matter were able to form in the case of early seeding and a sufficient supply of precipitation. The soil structure was only rarely affected positively by catch crop cultivation, and catch crops did not contribute in the short term to loosening already compacted topsoils. In contrast, mechanical soil stresses caused by driving over the ground and additional working steps used in cultivating catch crops often led to lower air capacity in these treatments. This is consistent with the soil compaction risks calculated using the REPRO model, which were higher in the treatments with catch cropping. Catch crop cultivation also only resulted in improved mechanical stability at one location. The positive effect of deep ploughless tillage on air capacity and saturated hydraulic conductivity, however, became more clearly evident regardless of catch crop cultivation. In order for catch crop cultivation with large-grain legumes to be able to have a favourable impact on soil structure, it is therefore important that cultivating them does not result in any new soil compaction. In the conditions evaluated, deep tillage was more effective at loosening compacted topsoil than growing catch crops.     

支管射流三通结构优化与试验

为了提高支管射流三通水力性能,改善滴灌的灌水均匀性,基于CFX数值模拟技术,对进口宽度为15 mm的支管射流三通进行结构优化.选取位差、劈距、劈尖半径和侧壁倾角为影响因素,通过四因素三水平正交设计了9组模型,边界条件设定为进口压力100 kPa.选取支管射流三通出口设计流量为评价标准,支管射流三通最优结构尺寸为位差5.5 mm、劈距113 mm、劈尖半径13 mm、侧壁倾角10°.此结构尺寸参数下的支管射流三通水力性能试验结果表明:在进口水压为100 kPa时,支管射流三通脉冲频率为148次/min,水头压力振幅为37.9 kPa,水头压力损失为16.7 kPa,出口流量为0.698 L/s;支管射流三通所接滴灌带长度为60 m时,与普通支管三通相比,支管射流三通的灌水均匀系数提高了2.78%,流量偏差率降低了4.72%.该研究可为射流技术在脉冲滴灌系统的研究、开发与应用提供理论依据.     

棘孢木霉ACCC30536葡聚糖酶基因的克隆及表达

以棘孢木霉(Trichoderma asperellum)ACCC30536菌株为试材,采用聚合酶链式反应(PCR)技术克隆获得葡聚糖酶GH71基因的全长c DNA序列。结果表明:此基因的c DNA编码区序列全长1 296 bp,编码区可编码431个氨基酸。经Blast P相似性分析,其属于GH99~GH71超家族,与深绿木霉(T.atroviride)氨基酸序列XP_013941146的同源性最高,达到94%。7种不同诱导条件下,GH71基因的表达量变化明显。在2种病原菌细胞壁的诱导下,GH71基因的表达均呈先上升后下降又上升的趋势,在培养的12 h时达到最大值,分别为未诱导时的24.3倍和23.9倍。而在这2种病原菌发酵液的诱导下,GH71基因的表达均呈先下降后上升的趋势。在山新杨茎与叶的诱导下,GH71基因的表达量在24 h最大,分别为未诱导的25.4倍和25.2倍;在山新杨根的诱导下,GH71基因的表达量在48 h达到最大,是未诱导的28.1倍。     

基于Simulink的液压系统建模与仿真

针对农业机械中液压系统结构复杂、研发周期长等问题,通过分析农业机械中液压回路各个组成元件特性,基于Simulink构建元件动态数学模型。对液压回路进行研究,分析了液压回路在不同元件参数下的动态性能,为优化液压回路系统提供参考。