The Optimization Design for the Parameters of Capacitor Welding

Through the analysis in this paper,the optimum relation of the discharging current peak interval t m ,the discharging loop equivalent inductance L and equivalent resistance R is obtained.This paper analyze the original discharging loop equivalent inductance L ,which provides an effective method for adjustment and selection of inductance L to realize the optimization energy saving design of the welding machine.     

A Study on the FMS Planning and Scheduling System

After researching the function requirements of the planning and scheduling in manufacturing cells, the paper advanced a control structure with three phases, i. e. planning , scheduling and dispatching. The paper represented in detail the main purposes, requirements and scheduling actions in each phase. It suits to general machining FMSs.     

A Study on the Mathematical Models for Two Dimensional Guillotine Cullting-stock

Based on the analysis and study on some existed models for two-dimensional Guillotine Cutting-Stock problem, it is pointed out that some kinds of the models may miss some good cutting patterns,and some may result in inadequate solutions because of only considering the patterns with the smallest waste. A kind of revised two-dimensional cutting-stock models are developed,which transform the two-dimensional problem into the one-dimensional one using the dimension-decreasing heuristic method and whose initial patterns are considered comprehensively. In this kind of models, not only the least waste,but also the other constraints,such as the demands and the relative area of the order plates are considered.     

Optimization Analysis of Single-layer Reticulated Dome

A structural optimization algorithm is performed for single-layer Kiewit reticulated dome by means of ANASYS. In the process of optimum design, the overall weight is taken as objective function; the stress constraints and stability constraints etc are considered. Meanwhile, the geometrical non-linearity is taken into account. Then the overall stability analysis for the optimized single-layer reticulated dome is operated. The results show that the optimization design is reliable.     

Estimation of Cleaner Production Potential

The term Cleaner Production(CP)and Estimation of Cleaner Production Potential are introduced, meanwhile their importance are pointed out. Three kinds of cleaner technologies are put forward-Best Available Technology(BAT), Best Economic Attractive Technology(BEAT), and usually used new technology, combined with some CP casesat home and abroad. several cleaner technologies are compared, and the results show that the implementation of CP can greatly reduce consumption of resource and energy and pollution emission, There are obvious environmental, economic and social benefits. The great potential of CP in industrial pollution control are estimated and demonstrated ultimately.     

四流T型中间包控流装置优化的水模拟分析

以某钢厂四流中间包为研究对象,根据相似原理建立了1∶3的物理模型。模型研究了不同结构的挡墙、导流孔和湍流抑制器对中间包内流动特性的影响。实验结果表明,“Y”型挡墙和梯形湍流抑制器(方案F)组合的控流装置能获得相对较优的实验结果。采用方案F的控流装置后,总体的死区比例从原型的23.69%降为8.02%,钢液能得到更为充分的混匀;各流平均停留时间的标准差从原型方案的23.56降低到7.34,各流一致性也得到了明显的改善。     

TRUST REGION METHOD FOR UNCONSTRAINED OPTIMIZATION

A new trust region algorithm is proposed for solving unconstrained optimization problems. According to the quadratic approximate model of the original optimization problem,the trust region algorithm uses directions,a convex combination of the quasi-newton direction and the steepest descent direction. This algorithm with new strategy is analyzed and the global and local quadratic convergent theorems are proved. At last,the implementation and computational results of the algorithm are demonstrated.     

A Study on the Practical Algorithm for One Dimensional Equal Stock Cutting Problem

Based on alalysing the mathematical models for one dimensional equal stock cutting problem,a knapsack column generation algorithm has been constructed,which is a successive approximate algorithm for the practical engineering.In the end of this paper,some computational examples have been presented,which show that the convergence and optimum results of the algorithm are quite good.     

An evaluation of the Porac River irrigation system

An irrigation water management research programme was implemented by Hydraulics Research in collaboration with the National Irrigation Administration of the Philippines on the Porac Area of Porac Gumain Rivers Irrigation System. The objectives of the study are to monitor the response of the main canal network to changes in water availability and assess its capability to deliver crop water requirements to sub-areas jointly managed by National Irrigation Administration staff and existing Irrigator Associations. This paper presents an analysis of the response of the main system to the varying irrigation demands, and assesses the conjunctive use of groundwater with surface water and the potential of computer models to assist management with the preparation of the annual irrigation schedules.     

粮食生产的机械化问题

粮食牛产机械化是生产力发展的一个重要方而，也是一种必然趋势。机械化生产手段可以提高粮食产量，确保粮食生产持续发展，提高粮食生产效率和经济效益。粮食生产机械化不仅是农业技术变迁的一种自然发展过程，而且与制度变迁密切相关、互相促进。在粮食生产机械化中，有很多现实问题需要解决。