Compatibility of root growth and tuber production of potato cultivars with dynamic and static water‐saving irrigation managements

The important root characteristics of root length density (RLD) and root mass density (RMD) generally differ among irrigation managements and potato cultivars. The objective of this study was to investigate the RLD and RMD variations and their functional relationships with gross potato tuber yield for two commercial potato cultivars, Agria and Sante, under different irrigation strategies. Full irrigation and water‐saving irrigation strategies, deficit and partial root drying irrigations, were applied statically (S) and dynamically (D) based on daily crop evapotranspiration. Results showed that SPRD had significantly greater RLD (3.64 cm/cm³) and RMD (132.7 μg/cm³) than other irrigation treatments. Between the potato cultivars, Agria had significantly larger values of RLD (3.50 cm/cm³) and RMD (138.7 μg/cm³) than Sante. The functional relationship between the root growth characteristics and tuber yield showed that under water‐saving irrigations, Agria increased root mass at the expense of gross tuber yield but Sante increased root mass to maintain larger gross tuber yields. However, Agria produced more roots and gross tuber yield than Sante, and it is concluded that Agria is a more drought‐tolerant potato cultivar, which is recommended for tuber production in regions where water might be scarce. It was shown that larger root production in potatoes was associated with improved tolerance to water stress.     

The Phytotoxicity of Various Graminicides in Durum Wheat in Greece

The effect of three herbicides, diclofop-methyl (DM), imazamethabenz-methyl (IM) and fenoxaprop-ethyl (FE), was investigated at the recommended rate (×) and double the recommended rate (2×) in a durum wheat crop. FE had the smallest effect on root system characteristics, while IM had the greatest effect. For all herbicides, the double rate treatment gave a greater statistical reduction than the single rate for root system characteristics. FE had the smallest effect on the activity of aerobic microorganisms, while DM gave the greatest reduction, 10 days after application, and all three herbicides reduced earthworm abundance. DM gave the smallest reduction in the number of tillers and in plant height, while the double rate of IM gave the greatest reduction. For all three herbicides, double the recommended rate resulted in a significant reduction in the weight of 1000 seeds, while no statistically significant deviations were noted at the recommended rate. Finally, the use of all three herbicides resulted in significantly lower statistical yields compared to the sample (control plot), although there were no significant statistical differences among them, for either recommended or double recommended rates.     

Matlab在经济管理中的应用

Matlab是功能强大的计算机软件，它在自动控制、机电和土木工程以及经济管理领域有着广泛的应用．我们给出了扩展的指派问题，且证明了该问题与原指派问题的最优值相同，然后利用Matlab语言，得到了指派问题的Matlab算法，对运输问题也给出了该问题的Matlab算法．计算实例表明，新的解题方法，既简易又精确．     

Horizontal transmission and host-virulence attenuation of totivirus in violet root rot fungus Helicobasidium mompa

Monokaryotic strains of Helicobasidium mompa were used as vectors of a mycovirus between various H. mompa isolates to examine the transmissibility of one of the mycoviruses, totivirus (HmTV1–17 virus) in the hypovirulent isolate V17 of H. mompa. The isolates that acquired HmTV1–17 virus were also examined for any alteration in the virulence. Twelve dikaryotic isolates of H. mompa, belonging to 11 mycelial compatibility groups (MCGs) and being mycelially incompatible with isolate V17, were used as recipients of HmTV1–17 virus. Two monokaryotic isolates that were mycelially incompatible with isolate V17 and all of the recipients were also used as vectors of HmTV1-17 virus between isolate V17 and the recipients. When isolate V17 and recipients were directly paired on plate media, HmTV1-17 virus was transmitted from isolate V17 into 2 of the 12 recipients (i.e., 2 of the 11 MCGs). Two monokaryotic strains were paired with isolate V17, and the monokaryotic strains that acquired HmTV1-17 virus were then used as new virus donors. When the monokaryotic strains containing HmTV1-17 virus were paired with the 12 recipients, HmTV1-17 virus was transmitted into 7 of the 12 recipients from the monokaryotic strains (i.e., 7 of 11 MCGs). Based on these results, we concluded that monokaryotic strains could act as vectors to transmit HmTV1-17 virus into H. mompa isolates. When four of the H. mompa isolates that acquired HmTV1-17 virus were used to inoculate apple rootstock Malus prunifolia, the virulence of all of the isolates was attenuated from that of their parental isolates. Moreover, because the DNA fingerprints of the fungal isolates that acquired HmTV1-17 virus were the same as those of their parental isolates, the infection with HmTV1-17 virus is considered the cause of virulence attenuation of H. mompa.     

The Effect of Detopping the Field Bean Plants (Vicia faba L. minor) and Lack of the Pod Setting on the Symbiosis with Root Nodule Bacteria

The plants of field bean var. Nadwiślaνski were detopped after about 1 month since the beginning of flowering and after that all flower buds were removed from some plants. The effect of a change in the trophic balance on the setting and subsequent growth of root nodules was studied.
The removal of pods had the greater effect on the increase in the weight of the remaining organs than the detopping of plants. Detopping retarded the ageing of the plants and delayed the phase of the greatest reduction of the number of pods. The detopping of plants revealed their considerable compensative possibilities in terms of production of the pod weight and the potential of leaves for biomass production. The data obtained indicate that plant detopping may disturb the root–bacteria exchange of signals, necessary to initiate the nodule development, while the further growth of nodules depends, above all, on the amount of available photosynthates.
A very high correlation between the dry weight of the whole plant to the dry weight of leaves ratio and the weight of nodules was observed. It proves the importance of the trophic balance of the plant for the root nodule weight production.     

非平行直纹面的电解磨削

为解决整体叶轮扭曲叶片型面的精加工难题,本文进行了五轴联动数控展成电解磨削的基础研究.在分析平行直纹展成电解磨削整体叶轮扭曲叶片的过切误差、得到过切误差计算公式的基础上,提出用圆锥磨轮和组合式五轴联动数控方案来消除过切误差的方法.文中还介绍了数控展成电解磨床的结构与运动、经济型多轴数控系统及其联动控制方法,并建立了电解磨削非平行直纹展成曲面的数学模型,开发了五轴联动数控展成电解磨削自动数控编程系统,对航空发动机整体叶轮的叶片型面进行电解磨削.结果表明,加工效率比手工修磨、抛光提高了12倍以上.     

Application of acoustic Doppler current profiler combined with a scientific echo sounder for krill Euphausia pacifica density estimation

ABSTRACT:   An application of the acoustic Doppler current profiler (ADCP, 153.6 kHz) in combination with a scientific echo sounder (EK60, 38 and 200 kHz) was investigated to estimate the density of krill Euphausia pacifica . The acoustic backscattering strength from sound scattering layers was compared with biomass estimates from midwater trawls. Euphausia pacifica was targeted among mixed species populations in the sound scattering layer in the offshore Funka Bay area of Hokkaido, Japan. The frequency characteristics of acoustic backscattering by krill were calculated using a distorted wave Born approximation scattering model at three frequencies. Krill aggregations identified from the EK60 data were extracted as the mean volume backscattering strength difference between two frequencies. They were then used to identify similar aggregations in the ADCP data by matching observation times and depths for the two methods, which were applied simultaneously. Results from the comparison of the mean volume backscattering strength and the density calculated from the ADCP and EK60 showed that ADCP can be used to measure density and spatial–temporal distribution of krill aggregations. Current speed and direction at the study site were found to be 16.1 cm/s and 187.0°, respectively, and krill speed and direction (including the current component) were found to be 19.8 cm/s and 172.2°, respectively. Based on the ADCP data, the net speed and direction of the krill aggregations were found to be 5.9 cm/s and 128.0°, respectively.     

Evaluation of Five Most Commonly Grown Cotton Cultivars (Gossypium hirsutum L.) Under Mediterranean Conditions: Productivity and Fibre Quality

Studies were conducted in four regions of central Greece (Larisa, Karditsa, Livadia, Thiva), to evaluate the productivity and fibre properties (fibre strength and fibre length) of the five most commonly grown cotton cultivars in these regions. The experiments lasted for 6 years (1995–2000). All the characteristics tested were strongly influenced by the factors ‘year’, ‘cultivar’ and ‘region’. Significant cultivar × region, year × cultivar, region × year and cultivar × region × year interactions occurred for all the characteristics studied. The cultivar Alegria had the highest seed‐cotton and lint yield, while Aria had the lowest ones. Both cultivars gave the highest mean lint percentage but the lowest mean boll weight (MBW). Alegria had the lowest fibre strength, while Aria had the highest. The Acala‐type cultivars, Acala SJ2 and Zeta 2, had intermediate seed‐cotton and lint yield, while Vered 171 had high seed‐cotton and satisfactory lint yield. The three cultivars mentioned above had the highest MBW and very good fibre strength. Positive correlation was observed between fibre strength and length. In spite of the fact that mean fibre length was statistically the same in all cultivars, it was influenced by the factor ‘year’, as a result of different weather conditions. The year 1996 was the most unfavourable one for seed‐cotton yield and MBW, because it was characterized by lower than average air temperatures and rather dry conditions for all study sites. The factor ‘region’, a combination of different climatic conditions and cultural practices, influenced significantly all the parameters studied.     

二化螟群集性的调查研究

通过对二化螟群集性的调查分析,初步查明在不同类型田、水稻的不同生育期、二化螟幼虫的不同龄次,二化螟幼虫的群集性不同.这为科学制订二化螟防治指标提供了理论依据。