水稻直播机船底板下流体的数值模拟

利用有限元分析软件ANSYS中的计算流体动力学模块(FLOTRANCFD),对船底板下的流体进行模拟和分析,讨论在考虑形状损失和摩擦损失时,船底板下流体的流线和流动情况。通过对流体的仿真得出:船底板横挡板的前倾角对船底板下流体的流线和流量有较大的影响,并得出在倾角30o和60o时有较好的流动情况。     

滑动轴承在农业机械中的使用与维护

轴承主要用来支承轴及轴上零件,并保持轴的旋转精度和减少转轴与支承之间的摩擦和磨损.为此,探讨了滑动轴承的工作原理、常见故障类型及采取的防范措施,针对故障原因对滑动轴承进行日常维护,为推动轴承在农业机械中的合理使用和维护提供参考依据.     

黄河流域典型灌区灌溉节水管理模型研究

以黄河流域上下游2个典型灌区为背景，针对灌区有其农业水管理现状，开发了灌溉节水策略分析决策支持系统（DSS）原型。DSS是一个规划工具，通过对不同策略下田间配水及供水系统的模拟分析及综合决策，寻求最优的策略集合，以达到节约灌溉用水量、提高农业用水效率及维持农业可持续发展的目的。该DSS系统主要用于黄河流域灌区提高农业水管理水平的策略分析，也可用于评估灌区续建配套及土地最佳利用方案等方面。     

Monitoring forage production for farmers’ decision making

Objective management of grazing livestock production systems needs monitoring of forage production at the managerial unit level. Our objectives were to develop a system that routinely estimates forage above-ground net primary production (ANPP) at the spatial and temporal resolution required by farmers in the Pampas of Argentina, and to facilitate adoption of the system by end users as a managerial support tool. Our approach was based on the radiation use efficiency (RUE) logic, which proposes that ANPP is determined by the amount of photosynthetically active radiation absorbed by the canopy (APAR), and the efficiency with which that energy is transformed in above-ground dry matter (radiation use efficiency, RUE). APAR is the product of incoming photosynthetically active radiation (PAR) and the fraction absorbed by the canopy (fPAR). We estimated fPAR as a non-linear function of MODIS normalized difference vegetation index (NDVI). RUE was empirically estimated for the two principal forage resources of the region, yielding the following relations: ANPP = 0.6 × APAR + 12, (R² = 0.86; p < 0.001; n = 18) for the upland sown pastures, and ANPP = 0.27 × APAR + 26, (R² = 0.74; p < 0.001; n = 18) for the lowland naturalized pastures, with ANPP in g/m²/60 days and APAR in MJ/m²/60 days. The models were able to predict independent ANPP values with acceptable accuracy. Computational procedures were automated and run in a Relational Data Base Manager System that stored and managed all the information. The system is currently monitoring 212,794 ha in 83 farms and provides monthly ANPP values for the previous month and a history of the last 6 years. The data so generated show ANPP differences between the two major forage resources, considerable variability of a given month’s ANPP among years and paddocks, and contrasting among-farm differences in the efficiency of conversion of ANPP and forage supplements into beef production. The system was well accepted by end users who utilize it mainly for making near real time decisions according to last month ANPP, and explaining results of previous production cycles by incorporating ANPP as an explicative variable. However, there were differences among farmers in the degree of utilization, apparently related to the advisor’s attitude toward this new technology. Our results indicate that (1) forage production of large extensions can be monthly monitored at the paddock level by a small laboratory with capabilities in geographic information systems, and (2) advisors and farmers apply this information to their managerial decisions.     

BY-150型种子包衣机检测控制系统设计

包衣机在批量加工流程中需要针对供种量和进液量等重要参数进行检测,否则无法保证良好的包衣效果。为此,设计了一种包衣机检测控制系统,可实现对供种量和进液量参数信息的检测和控制。同时,需在供种量检测模块的硬件选型和电路设计中采用尽可能多的抗干扰措施保证种子质量的检测精度,在进液量检测模块的设计中通过采用主板信号控制动作启动、传感器检测电路直接控制动作结束的方式保证进液控制的稳定性,并通过液晶触摸屏为用户提供一个简单直观的人机交互方式。整个系统稳定可靠、抗干扰性好,满足预期的精度要求,包衣效果良好。     

车辆导航定位系统GPS接收机的原理与研制

分析了OEM板和GPS技术原理，介绍了基于OEM板的GPS接收机开发方法，重点阐述了车辆导航定位系统GPS接收机的软、硬件体系结构及研制过程，详细说明了单片机C语言串行通讯原理与程序编制。     

行走式自动点灌机的设计分析及应用

从改变点灌机整机的传动原理入手，使整机结构简单、布置合理、造价低廉；将所需要的灌水排量变为可调式，使水能及时、准确地注入穴位；简化了直流永磁电机的制作工艺，从上述诸方面阐述了行走式自动点灌机结构的设计特点，简述了该机的效益及应用前景，并对今后进一步的研究提出了建议。     

仿形雕刻机的设计

木雕制品是对木材经过艺术构思后进行雕刻加工的一种工艺制品，可以用来装饰居室、殿堂、建筑，给人带来美及艺术的享受。随着人们生活水平的提高，该制品的需求量越来越大，产业前景非常好。为此，介绍了一种新型仿形雕刻机的结构和工作原理，利用该装备可以实现对木雕制品及木制品的仿形加工。     

Combining deliberative and computer-based methods for multi-objective land-use planning

This paper reports the outcomes of a deliberative workshop comparing land-use plans proposed by land-manager or domain experts with those derived using a computer-based decision support system (DSS). The DSS integrates four main components, a geographic information system, land-use systems simulation models, impact assessments and land-use planning tools. The land-use planning tools draw on the other components to generate and evaluate alternative patterns of land use and management. Since the land-use planning tools are based on multi-objective genetic algorithms (mGAs) it is possible to generate a range of alternative plans that define the structure of the trade-off between the objectives. The workshop tasked the delegates with specifying land-use plans that achieved the best compromise between two objectives known to be non-commensurable and conflicting. The nature of the best compromise was dependent on their individual perspectives. The delegates proposed allocations both as individuals and in researcher-facilitated sub-groups. The mGA allocations were then compared with those derived by delegates and were found to be broadly similar in performance. Differences in the range of allocations considered feasible were explained by the hard and soft constraints on allocations agreed between the delegates and articulated within the workshop process. The hypothesis that part of the difference in performance between the mGA and delegate allocations was due to the delegates blocking together fields with the same land use for convenience of management was proved. The analysis of the group allocations revealed that the decision-making process had failed to improve on the individual allocations. From these results it was concluded that there was a potential role for mGA based land-use planning tools in researching into, and deliberating on, the possible impacts of policy or other factors affecting land-use systems. It was further concluded that the tools should not be used in isolation since there was the need for stake-holder inputs to adequately define the range of feasible and practical land-use plans.     

秸秆揉切机用刀片磨损的研究

对9RZ-60型揉切机用刀片进行了磨损试验,探讨了刀片材料、作业对象、装机位置和刃口形式对刀片磨损的影响,对65Mn、T10和Crl2MoV三种材料的刀片磨损表面形貌进行了微观分析,指出加工羊草时,刀片材料为主要影响因素,加工玉米秸和豆秸时,刃口形式为主要影响因素。刀片加工秸秆的磨损形式是以抛光磨损为主,辅之以硬杂质造成的磨料磨损。