Sensitivity of four Yeasts to Fungicides and CO2 Concentrations and Their Antagonistic Ability in Combination with Fungicide to pathogenic Fungi in vitro

The yeasts Cryptococcus laurentii,Trichosporon pullulans,Rhodotorula glutinis and Trichosporon sp.were used to investigate their sensitivity to four fungicides and different concentrations of CO2,as well as their antagonistic ability to Penicilliumexpansum and Alternaria alternata in vitro when applied with fungicide.There were significant differences in sensitivity to the fungicides among the different yeasts(P = 0.05).R.glutinis was more sensitive to Deccocil,Iprodione and Stroby as compared to other yeasts.Combination antagonistic yeasts with fungicide could more significantly enhance biocontrol ability of the yeasts against the pathogenic fungi in vitro(P = 0.05).C.laurentii was the most effective antagonist among the four yeasts and could completely control spore germination of P.expansum and A.alternata when combined with Stroby at the concentration of 100 μL L-1.The yeasts,except R.glutinis,could grow well on nutrient yeast dextrose agar (NYDA) after 8 d incubation even at 20% CO2 concentration at 25℃.Particularly Trichosporon sp.showeda better adaptability to low temperature as compared to other antagonists.     

白细胞介素和干扰素γ对绵羊体外受精胚胎体外发育影响的研究

利用SOFM+0.8%BSA+1mM谷氨酰胺作为绵羊胚胎的培养液,分别添加LIF、IL-1β、IL-2、IL-6及IFN-γ,以研究LIF、IL-1β、IL-2、IL-6及IFN-γ对绵羊早期胚胎发育的影响。结果说明,LIF促进2～8细胞胚胎发育至桑椹胚,同时也能够促进桑椹胚向扩大囊胚和孵化囊胚发育。但IL-1β、IL-2、IL-6及IFN-γ对绵羊早期胚胎的发育无显著影响。     

猪肺炎支原体黏附因子基因R1R2区的克隆及表达

根据GenBank登录的猪肺炎支原体232株P97基因和J株黏附因子基因设计了1对引物，以我国猪肺炎支原体Z株(强毒株)基因组DNA为模板，通过PCR方法扩增了该株黏附因子基因的部分序列。经序列分析后，重新设计了1对带有EcoRI和HindⅢ酶切位点的引物，并经引物的定点突变，PCR扩增了Z株黏附因子的R1R2区。扩增产物经双酶切后克隆到表达载体pET-32(a) 中。该重组质粒经酶切鉴定后，将其具有正确阅读框架的重组质粒转化到大肠杆菌BL21(DE3)感受态细胞，37℃下经IPTG诱导表达，得到相对分子质量约29000的融合蛋白，表达量约为11％。     

木瓜剖分原理研究及新机型设计

针对我国目前对木瓜剖半设备研究较少,剖切方式不合理,切割效果差等问题,设计开发了新型木瓜剖半机。该机切割方式选用滑切切割的方式,由运料系统、切割系统、出料系统组成,设计合理,结构简单。为此,计算了滑切角、切割角等主要切割参数,并给出了新型剖半机的主要技术参数。试验表明:该机切割效果好,能够有效提高生产效率。     

超临界CO_2流体处理工艺对木材渗透性的影响

以苯—乙醇为夹带剂,研究超临界CO2流体不同处理压力、温度、时间对福建产杉木、马尾松、檫木木材渗透性的影响。结果表明,在35 MPa内,处理压力的增大有利于3种木材渗透性的提高;杉木在处理温度为40℃时,渗透性的变化率达到最大,为493%,马尾松和檫木在处理温度为45℃时,渗透性的变化率达到最大,分别为479%和349%;较佳的处理时间为30 min。     

Estimating Combining Ability of 4x-2x Crosses in Cultivated Potatoes

Progenies derived from crosses between Solarium tuberosum and 2n pollen-Producing diploid hybrids, exhibit obvious hybrid vigor. The 2n pollen-producing clone can act as a bridge in crossing S. tuberosum and S. andigena with S. phureja. Populations from 4x-2x crosses show more unifomity and less segregation compared with that of 4x-4x crosses. The parent-offspring correlation for the traits, starch content and tuber number, is significant at 0.01 level. The regrssion equations are Y (mp-F1)=1.0 1.2x and Y (mp - F1) = 5.3 0.8x, respectively. The 2n pollen-producing clones play an impotant role in increasing tuber stach content. Estimates of the combining ability for the main yield components indicate that additive effect prodominatcs for such trais as plot yield, tuber weight per plant and starch content, whereas both additive and non-additive effects lay equal stress on mean tuber weight and non-additive effect is important for tuber number. In general, non-additive effect appears to be important in     

棉花纤维发育后期Mg2+,K+-ATP酶的活性分析

1989～1990年选用陆地棉(G.hirstum L.)北农1号品种和海岛棉(G.barbadenseL.)海7124品种为材料,对棉纤维发育后期的纤维素形成过程进行了研究。结果表明:①随着棉纤维的发育 Mg~(2+),K~+-ATP 酶活性逐渐下降。②Mg~(2+),K~+-ATP 酶活性的最适 pH 值为6.5。Mg~(2+),K~+ATP 酶活性随[Mg~(2+)],[K~+]和[NADH]/[NAD~+]的增大而变大。③Mg~(2+),K~+ATP 酶活性变化与还原性糖含量变化呈显著正相关(r=0.811~*),与纤维素含量变化呈极显著负相关(r=-0.900~(**))。④Mg~(2+),K~+-ATP 酶参与了纤维素的形成过程。     

几种造林措施对墨西哥柏、银荆保存率及生长的影响

在呈贡劣质山地对墨西哥柏、银荆树植树造林进行了不同整地方式、植塘规格、种植密度、抚育方式的试验。结果：撩壕整地和水平台地的保存率及幼树生长量优于块状整地，且在阴坡深草地段尤为显著。３种植塘规格（６０ｃｍ×６０ｃｍ×６０ｃｍ，５０ｃｍ×５０ｃｍ×５０ｃｍ，４０ｃｍ×４０ｃｍ×４０ｃｍ）对墨西哥柏的保存率和高、径生长差异不显著，对银荆差异极显著，大塘优于小塘。３种种植密度（１．５ｍ×１．５ｍ，１．５ｍ×２ｍ，２ｍ×２ｍ），对幼林期的高、径生长及冠幅大小无显著影响，在３０°以上的陡坡，台地抚育优于菱形、扇形、块状抚育，与对照比较，４种抚育方式与之差异极显著。     

油气管道风险管理技术现状及对策

介绍了国内外油气管道风险管理技术的研究现状、应用成果及最新的发展趋势,对比分析了国内外油气管道风险管理技术的差距,强调了油气管道风险管理的重要性,指出了油气管道风险技术的发展方向,为油气管道安全运行提供了技术支持.     

基于图形旋转系统的渐进网格研究

拓扑简化可以为渐进网格带来更好的效果，但目前几乎所有的渐进网格方法都不支持拓扑简化，而且edge collapse和vertex split操作有时会产生非流形．针对这些问题，提出了基于图形旋转系统的渐进网格法．以基于图形旋转系统的数据结构和操作实现了渐进网格，用图形旋转系统的操作集合构建了edge collapse和vertex split操作．在此基础上，通过扩展新操作即可进行任意拓扑变化，从而实现拓扑简化，