测试方法对毛竹顺纹抗剪强度的影响

以4年生毛竹为对象,分别按照国家标准、行业标准和国际标准的方法,进行顺纹抗剪强度的测试.结果表明:测试方法、试件形状以及加载速度对抗剪强度均有显著影响;行业标准的试件形状能较准确测出竹材的纯抗剪强度,综合测试时间,加载速度以0.8～1.5 mm/min为宜.     

植物叶发育分子遗传机制的研究进展

植物的叶发育是由复杂的调控网络相互作用而进行调控的。植物叶发育的基本过程可以分为叶原基的起始发育、叶片极性的建立、叶片大小以及叶形的调控,本文主要从以上4个过程对叶发育分子遗传机制进行了阐述。     

基于自压滴灌工程过滤装置尺寸的确定及应用

由于新疆牧业灌区无电供应,水源无法过滤,实现滴灌工程难,目前采用地面灌溉。地形坡度大、灌水量多、大量水土流失。灌区下游排水不畅,洼地沼泽化面积剧增,地下水位上升导致土壤盐碱化,弃田面积逐渐扩大、种植面积萎缩。为了解决上述问题,充分利用地形落差,研制了自压滴灌工程过滤装置。同时渠道进水流量、调水池的调节流量、集水桶流量及系统流量之间建立了平衡关系。用实例说明不同地形落差与自压滴灌工程系统流量及过滤装置尺寸的计算过程。解决了自压滴灌工程水源的过滤、排沙、冲沙及自行冲洗等问题。为无电牧业灌区实现节水灌溉技术提供依据。     

Effect of soil pore size distribution on plant-available water and least limiting water range as soil physical quality indicators

Soil pore size distribution(SPSD) is one of the most important soil physical properties. This research investigated the relationships of location and shape parameters of the SPSD curves with plant-available water(PAW) and least limiting water range(LLWR) of the light-textured soils at the Torogh Agricultural Research Station in north-eastern Iran. Soil moisture release curve(SMRC), PAW and LLWR in matric heads of 100 and 330 h Pa for the field capacity and location and shape parameters of the SPSD curves of 30 soils with different texture and organic carbon contents were determined, and the variable relationships were statistically analyzed. The results showed that the median equivalent pore diameter(de), mean de, standard deviation(SD*), and skewness of the SPSD curves were significantly correlated with PAW(PAW330) and LLWR(LLWR330) measured in a matric head of 330 h Pa. Decrease in deand increase in the diversity of soil pore size(SD*) increased PAW330 and LLWR330. The SD* values of all the soil samples were lower than the optimal ranges suggested in literature. Neither PAW nor LLWR values were significantly different in the soils with the optimal modal deand those with non-optimal modal de. Optimal values of median and mean equivalent pore diameters and kurtosis of SPSD curves led to a significant improvement of PAW330 and LLWR330 as soil physical quality indicators. It was recommended to revise the optimal ranges for SD* and modal defor future studies.     

Intensive organic vegetable production increases soil organic carbon but with a lower carbon conversion efficiency than integrated management

Intensive vegetable production in greenhouses has rapidly expanded in China since the 1990s and increased to 1.3 million ha of farmland by 2016, which is the highest in the world. We conducted an 11‐year greenhouse vegetable production experiment from 2002 to 2013 to observe soil organic carbon (SOC) dynamics under three management systems, i.e., conventional (CON), integrated (ING), and intensive organic (ORG) farming. Soil samples (0–20 and 20–40 cm depth) were collected in 2002 and 2013 and separated into four particle‐size fractions, i.e., coarse sand (> 250 µm), fine sand (250–53 µm), silt (53–2 µm), and clay (< 2 µm). The SOC contents and δ¹³C values of the whole soil and the four particle‐size fractions were analyzed. After 11 years of vegetable farming, ORG and ING significantly increased SOC stocks (0–20 cm) by 4008 ± 36.6 and 2880 ± 365 kg C ha^?1 y^?1, respectively, 8.1‐ and 5.8‐times that of CON (494 ± 42.6 kg C ha^?1 y^?1). The SOC stock increase in ORG at 20–40 cm depth was 245 ± 66.4 kg C ha^?1 y^?1, significantly higher than in ING (66 ± 13.4 kg C ha^?1 y^?1) and CON (109 ± 44.8 kg C ha^?1 y^?1). Analyses of ¹³C revealed a significant increase in newly produced SOC in both soil layers in ORG. However, the carbon conversion efficiency (CE: increased organic carbon in soil divided by organic carbon input) was lower in ORG (14.4%–21.7%) than in ING (18.2%–27.4%). Among the four particle‐sizes in the 0–20 cm layer, the silt fraction exhibited the largest proportion of increase in SOC content (57.8% and 55.4% of the SOC increase in ORG and ING, respectively). A similar trend was detected in the 20–40 cm soil layer. Over all, intensive organic (ORG) vegetable production increases soil organic carbon but with a lower carbon conversion efficiency than integrated (ING) management.     

土壤颗粒分布体积分形维数与数量分形维数之间的关系

土壤的体积颗粒分布(PSD)可用于同时确定数量分形维数(DN)和体积分形维数(DV)。以往的试验和理论研究均未直接比较DV和DN的关系。为建立DV和DN的关系并分析其参数的敏感程度,在中国各地取了12种不同质地土壤,利用激光粒度仪进行了测定。提出了含3个参数Rupper(颗粒半径的上限),Ri(第i个半径)和Rlower(半径下限)的DV-DN理论关系,该关系可说明为什么DN可能大于3。在未调整的幂定律范围内(PLR),DV的幂定律半径为38.6～85.8μm,DN的幂定律半径为53.2～358μm,估算的DV值(2.18～2.69)比DN值(2.38～3.19)小。调整后的PLR比未调整的窄。在调整的PLRs范围内,估算的DV值变化范围为2.11～2.56,而DN变化范围为2.28～3.02。调整和未调整PLRs得出的DV和DN的差异说明,Rupper,Rlower,Ri和Rlower/Rupper均可能影响DV与DN关系,有必要进行参数的敏感性分析。进行敏感性分析可基于敏感系数(C)来鉴别DV-DN关系中各参数改变所引起的DV和DN相对变化,从而找出对该关系影响最大的参数。就不同情况下计算的C值而言,Rupper是影响DN值的最重要参数,小的Rupper值可能导致估算DN的准确度降低。PLR范围越大,DN的估算越准确。根据DV估算DN的相对误差的绝对值在12%范围内,说明得出的DV-DN理论关系是正确的。     

豫西脂尾羊体尺与体重的相关性分析

运用SPSS软件对139只豫西脂尾羊体尺、体重的测定结果进行相关分析和通径分析,并建立最优回归方程。结果表明:豫西脂尾羊的体重(-Y)与体高(X1)、体长(X2)、胸围(X3)、胸宽(X4)、胸深(X5)、尾宽(X6)、尾长(X7)均呈极显著正相关。胸深、体高、胸宽的直接作用和间接作用对体重的影响都极大。得到最优回归方程为-Y=0.438X1+(-0.209)X2+0.554X5;经t检验,方程具有极显著的真实性和拟合度。     

绵羊BMPR-IB基因在分子标记育种中的应用效果

[目的]分析小尾寒羊、德国美利奴、德国美利奴(♂)和小尾寒羊(♀)杂交一代(简称DF1)共204 只个体的单核苷酸多态性及其与产羔数间的关系.[方法]以绵羊BMPR-IB 基因作为候选基因,采用PCR-sscp 检测方法.[结果]B等位基因在小尾寒羊、德国美利奴、德寒杂交一代中的频率分别为0.660、0.532和0.600,基因频率及基因型频率在3个群体间的分布差异不显著(P>0.05).BB、B+、++型的产羔数分别为2.86、2.27和2.08,BB 型显著高于B+ 和++ 型(P>0.05),B+ 型显著高于++ 型(P>0.05).[结论]在以小尾寒羊为母本的杂交育种过程中,B等位基因是有效的辅助标记基因.     

伊犁地区荷斯坦奶牛体尺体重及外貌评分对产奶量的影响

[目的]了解荷斯坦奶牛体尺、体重及外貌评分对产奶量的影响.[方法]通过对伊犁地区荷斯坦奶牛和褐牛的品种、外貌、体尺测定登记与整理,统计伊犁地区奶牛的体高、体长、胸围、管围、体重及外貌评分并利用数据,通过SPSS13.0统计软件进行产奶量的相关性分析.[结果]荷斯坦奶牛体高、体长、胸围、管围、体重、外貌评分对产奶量有显著影响(P＜0.01).[结论]为今后该地区在奶牛群的遗传选育和生产实践中正确考虑奶牛体尺、体重、体型性状、外貌性状对生产性能的影响,选择高产、稳产、健康的奶牛,合理规划育种方案和加强饲养管理,提供可靠的依据.