小麦花培材料的筛选和利用

花培育种是一条快速有效的育种途径，采用两种培养基对20个小麦组合材料进行花培分析，结果表明：小麦花培愈伤组织诱导培养基K优于C17，绿苗产率是C17的3.5倍多。不同基因型材料花药培养差异较大，筛选出一批不同类型的高培养力基因型材料，为有目的组配杂交组合提供依据，提高花培育种效率。     

用ImageWare实现缺损点云的曲面重构

针对有缺损的点云数据,提出了在逆行工程软件ImageWare平台下进行曲面重构的途径;介绍了运用逆向工程技术进行CAD模型设计的操作流程;用平行面截取点云数据,拟合出曲线线条;通过对曲线条的桥接,利用完整的曲线条重构出曲面。     

保护性耕作条件下松耕作业机具的探讨

松耕作业能打破犁底层、恢复土壤结构，形成适宜农作物生长的土体构造，是提高地表积温和作物产量的有效措施之一。为此，探讨了在秸秆覆盖条件下各种松耕作业机具的工艺特点及机具在保护性耕作播前作业中的适应性。     

Surface drainage requirement of crops: Application of a piecewise linear model for evaluating submergence tolerance

Crop tolerance to land submergence is an important criterion for designing a surface drainage system for agricultural lands. This paper collates the available data from various places in India related to the studies on the submergence tolerance of crops. The paper hypothesizes that a piecewise linear model could be used to describe crop response to land submergence. According to this hypothesis, there would be no yield decline for a few initial days of submergence. If submergence continues beyond this period then there would be linear decline in yield. The unknown parameters in the model are: optimum yield, threshold time and the slope which represents the per cent yield reduction per day of additional submergence beyond the threshold.Data in respect of wheat, pigeon peas, cowpeas, pearlmillet, maize and groundnuts indicate that the model describes the data well, although in many cases the threshold is 0.0. The yield reduction varies from 5.3 to 23.2% for each day of submergence beyond the threshold. It appears that to allow for more than 1–2 days of submergence will result in more than 10% reducation in yield of dryfoot crops. For the maize crop, the seedling stage is the most sensitive stage followed by the silking stage. The grain formation stage is the least sensitive, although even at this stage the threshold is 0.0 and yield reduction is 9.3% for each day of submergence beyond the threshold. The data for 9 test crops from Texas and Venezuela were well described by the model. It is concluded that the piecewise linear model is a useful tool for describing submergence tolerance of crops and for working out surface drainage requirements for a given level of yield reduction. Frequency analysis of the daily rainfall data from some selected locations indicates that there is every likelihood of submergence at most of the stations. It is suggested that there is an urgent need for developing wet farming techniques analogous to dry farming techniques.     

摆动活齿传动系统扭转振动分析

建立了摆动活齿传动系统的扭转振动动力学模型，导出了该扭振系统的振动方程。系统动力学模型考虑了活齿传动双排结构中激波器、活齿、活齿架的转动惯量、时变啮合刚度、误差、阻尼等，因此，所建立的微分方程式是多自由度时变方程组，对此，采用四阶Runge-Kutta法对系统动态响应进行了求解。     

水平直元线犁体曲面的三维参数化设计

介绍了水平直元线三维参数化设计犁体曲面的方法,并利用其设计了相关的犁体曲面.与犁体曲面平面作图的方法相比较,该方法克服了犁体曲面平面作图设计的缺陷和不足,缩短了犁体曲面的设计周期,降低了设计费用,提高了设计质量,效果较好,为后续犁体曲面开发奠定了良好的基础.     

黑龙江省江川灌区灌溉水资源的综合评价

在介绍江川灌区流域概况的基础上，提出了该灌区所面临的地下水灌溉水稻米质差、产量低、大米销路不好等问题的解决办法，即发展地表水灌溉水稻，通过引松花江水来解决灌溉水源；分别对地下水、地表水(松花江水)的水量和水质进行评价。结果表明，该灌区的地下水严重超采、水质中总铁量超标(超6mg/L)，pH值偏碱，不适合用于农业灌溉；地表水(松花江水)除铁离子略高外，其余各项指标均满足灌溉要求，为该灌区引松花江水灌溉水稻提供了较为科学的依据。     

含间隙内燃机曲柄滑声机构动力学研究

考虑到含间隙运动副副元素的碰撞接触时的边界条件，采用非线性弹簧力和非线性阻尼描述副无素的碰撞接触过程，以此为基础建立了含间隙内燃机曲柄滑块机构的动力学模型；通过数值仿真研究了运动副间隙对机构动态特性的影响，并指出在机构高运转条件下，运动副元素存在连续变形接触现象。     

Loop细分技术在犁体曲面造型中的应用

阐述了细分方法的基本思想以及基于三角网格的Loop细分模式的原理和方法；提出了在相关几何造型、有限元分析和动态仿真软件配合下，基于OpenGL环境或CAD二次开发环境的复杂犁体曲面造型的细分方案；对犁体曲面的控制网格生成、边界限定等关键技术进行了讨论。利用该方法可以有效缩短复杂犁体曲面的造型、计算和分析时间。     

基于MDT的双翼翻土防漏耕犁的犁体曲面展开

介绍一种基于MDT的犁壁曲面双样板曲线近似展开法，在MDT平台上直接用直线投影法求样板曲线，并直接将正视图投影到三维犁曲面上求各元线实长，减少了计算工作量，具有快捷方便的优点，该方法已用于双翼翻土防漏耕犁的设计，效果良好。