Research on the Realization of Remote Controlling for Multi-output Power Supply of Communication Equipment Based on Ethernet

According to the requirements of communication power supply, such as high reliability, wide application and high availability, the authors raise a new remote control design for a multi-output power supply for communication equipment based on TCPIP protocol and embedded technology. Then the hardware design is given for the system is discussed based on Ethernet professional chip PRTL8019AS and related circuits. The firmware software design for the salve-computer based TCPIP technology, and the soft design of communieation and control for the master-computer are proposed based on Winsoek and MFC technology in detail A test machine is built to do the testing, the test results prove that the test machine works stably and well, satisfies the design rules and also provides a feasible method for the remote supervise in communication power supplier whose requirement includes remote supervise, no-people on duty and so on.     

Monitoring and Assessment of Tie on the Caiyuanba Yangtze Bridge

The monitoring and assessment scheme of the Caiyuanba Yangtze Bridge is present by sensitivity analysis. The mechanics character of the six ties is studied by numerical simulation, and then the sensor location and selection are discussed considering the technique of sensor and construction situation. The trend of the displacement at the sensor location is analyzed according to different damage level of ties, the pattern associating with several displacements which are sensitive to damage at ties is bring forward to improve assessment reliability. The result can assist implement of structural health monitoring system to the same type as this bridge.     

Engineering Calculation Mode Based on Reformative B/S Architecture

Engineering designed mode has entered a new stage because of the development of network. New calculating system based on network appeared. By analyzing the common B/S architecture, this paper brings forward an reformative architecture based on Web services and ASP. NET in order to build the new mode of engineering calculation. It can fully implement the sharing of the resources and provide the engineering designers a wonderful calculating environment, and the working eifficiency of designers can be enhanced.     

Clustering Routing for Wireless Sensor Networks

In wireless sensor networks that consist of a large number of low-power sensors.Because the sensor's energy is limited,one of the main design is to obtain long system lifetime.The authors firstly analyse LEACH and LEACH-C clustering routing for wireless sensor networks.Aimming at their shortcoming,they present a new routing LEACH-NEW.This routing uses multi ho Pinstead of one hop.At last,they use NS2 to simulate them.Simulation show results that new routing exhibits noticeably longer system lifetime than rouing LEACH and LEACH-C.     

坝上生态农业工程生态效益监测与评价研究

利用遥感技术、地理信息系统和全球定位系统对河北坝上实施生态农业工程建设后的生态效益进行了监测与评价。定量描述了坝上生态环境的动态变化趋势，并对坝上生态农业工程的气候效益、土壤改良效益、农业水文生态效益进行了分析与评价。研究结果表明，通过工程治理，使农业生态系统的功能增强，结构合理，取得了显著的生态效益。     

喷雾机器人远程控制系统的设计与试验研究

结合喷雾机器人作业环境的要求,开发出基于客户端/服务器模式的远程控制平台.该平台实现了通过无线网络实时传输各类数据和控制命令,客户端再现了机器人的工作环境和状态.在此基础上进行了系统性能测试和轨迹测试.试验结果表明:为了保证良好的操控性,机器人所处区域信号强度必须大于30%,操作者根据反馈信息判断机器人是否偏离预定路径,并在偏离时给予有效的纠正,为解决喷雾机器人重喷、漏喷的问题提供了一种方法.     

饲喂机器人的研究与开发

精确饲喂的机器人主要由行走机构、料箱、分料螺旋和控制系统等部分组成,利用霍尔传感器和无线识别装置分别实现自身的精确定位以及奶牛的识别。机器人的控制器采用PIC16F877微处理器构成,主要完成机器人的运动控制以及与管理微机的数据交换。饲喂机器人效率高、成本低,定量饲喂有利于提高奶牛的产奶量,适合在奶牛场推广和应用。     

Monitoring forage production for farmers’ decision making

Objective management of grazing livestock production systems needs monitoring of forage production at the managerial unit level. Our objectives were to develop a system that routinely estimates forage above-ground net primary production (ANPP) at the spatial and temporal resolution required by farmers in the Pampas of Argentina, and to facilitate adoption of the system by end users as a managerial support tool. Our approach was based on the radiation use efficiency (RUE) logic, which proposes that ANPP is determined by the amount of photosynthetically active radiation absorbed by the canopy (APAR), and the efficiency with which that energy is transformed in above-ground dry matter (radiation use efficiency, RUE). APAR is the product of incoming photosynthetically active radiation (PAR) and the fraction absorbed by the canopy (fPAR). We estimated fPAR as a non-linear function of MODIS normalized difference vegetation index (NDVI). RUE was empirically estimated for the two principal forage resources of the region, yielding the following relations: ANPP = 0.6 × APAR + 12, (R² = 0.86; p < 0.001; n = 18) for the upland sown pastures, and ANPP = 0.27 × APAR + 26, (R² = 0.74; p < 0.001; n = 18) for the lowland naturalized pastures, with ANPP in g/m²/60 days and APAR in MJ/m²/60 days. The models were able to predict independent ANPP values with acceptable accuracy. Computational procedures were automated and run in a Relational Data Base Manager System that stored and managed all the information. The system is currently monitoring 212,794 ha in 83 farms and provides monthly ANPP values for the previous month and a history of the last 6 years. The data so generated show ANPP differences between the two major forage resources, considerable variability of a given month’s ANPP among years and paddocks, and contrasting among-farm differences in the efficiency of conversion of ANPP and forage supplements into beef production. The system was well accepted by end users who utilize it mainly for making near real time decisions according to last month ANPP, and explaining results of previous production cycles by incorporating ANPP as an explicative variable. However, there were differences among farmers in the degree of utilization, apparently related to the advisor’s attitude toward this new technology. Our results indicate that (1) forage production of large extensions can be monthly monitored at the paddock level by a small laboratory with capabilities in geographic information systems, and (2) advisors and farmers apply this information to their managerial decisions.     

基于物联网Android平台的远程智能节水灌溉系统

针对农业灌溉中的水资源浪费问题和灌溉远程控制问题,对物联网相关技术进行研究,设计了基于物联网Android平台的农业远程智能节水灌溉系统,实现了对多传感器节点(空气温湿度、光照、土壤湿度、电磁阀、变频器等)远程采集和控制,以及对多个控制器节点的远程监测与控制。系统不受时间地域限制,用户可以通过Android移动终端实现对智能节水灌溉系统的监测和控制。系统采用CC2 5 3 0作为无线传感器芯片、OK6 4 1 0作为控制器节点芯片。实测结果验证了该设计的可行性和有效性,可为远程智能节水灌溉提供平台支持,能够满足农业节水灌溉的需要。     

自走式喷雾机自动控制系统的研制

根据小型自走式喷雾机在田间固定轨道完成自动行走以及自动喷雾的作业要求，成功研制了基于单片机的喷雾机自动控制系统，利用线性霍尔器件，成功设计了可以远距离检测到磁标志的位置传感器，解决了田间喷雾机移动位置的信号传感问题。该控制系统可以实现自走式喷雾机的运动及喷雾控制。