砂土地肥料配施对小麦产量和土壤肥力的影响

彩四因子干净人通用旋转设计，研究了砂土地施用有机肥、氮、肥、磷肥和钾肥对小麦产量的作用和对土壤肥力的影响及其施肥因子之间的交互作用和最适配比。结果表明：有机肥、氮肥、磷肥和钾肥与小麦产量呈二次回归关系，砂土地要提高产量和培肥地力应立足于肥料配合施用，重施有机肥，酌情多施磷肥。     

农村沼气-秸秆气-太阳能"三能合一"综合运行模式探讨——以天津市邦均镇示范工程为例

介绍了农村沼气-秸秆气-太阳能"三能合一"综合运行模式,以邦均镇为例对"三能合一"模式进行了经济、生态和社会效益分析。分析表明,"三能合一"综合运行模式可以改善农村环境卫生状况,还能生产可再生能源,同时沼渣和沼液可以作为优质有机肥循环利用,该模式的技术和产品还可商业化,能取得良好的经济、生态和社会效益。     

The role of resistance breeding in the intergrated control of downy mildew (Bremia lactucae) in protected lettuce

Summary Over the last 30 years, six resistance alleles (Dm2, Dm3, Dm6, Dm7, Dm11 andDm16) located in two linkage groups, have contributed to the control of downy mildew in lettuce crops grown under protection (glass or polythene) in northern Europe. More recently, an as yet genetically uncharacterised resistance factor, R18, has also begun to assume importance. The occurrence of the various combinations of these resistance alleles that exist in commercial cultivars has been dictated by the pathotypes ofBremia lactucae used in their selection but also restricted by linkage in repulsion. In the UK, a pathotype ofB. lactucae insensitive to phenylamide fungicides, such as metalaxyl, emerged in 1978 and became prevalent throughout lettuce production areas in subsequent years. The specific virulence of this pathotype was identical to the previously described phenylamide sensitive pathotype NL10 and cultivars carryingDm11, Dm16 or R18 were resistant. Consequently, an integrated control strategy based on the utilisation of metalaxyl on cultivars carryingDm11 provided effective control in UK until 1987 when a new phenylamide insensitive pathotype began to cause problems. The specific virulence of this second pathotype, which was first reported in the Netherlands and France, was identical to the previously described phenylamide sensitive pathotype NL15. Cultivars carryingDm6, Dm16 or R18, but notDm11, were resistant to NL15; consequently an appropriate change in the cultivar recommendations for use in the integrated control strategy was successfully promulgated. It is predicted that variations of this integrated control strategy involving the use of appropriately selectedDm gene combinations may prove effective for some time. This prediction is based on studies of the status of the avirulence loci in the two phenylamide insensitive pathotypes and of the specific virulence characteristics of phenylamide sensitive components of the pathogen population.     

Trend and Stability Analysis to Interpret Results of Long-Term Effects of Application of Fertilizers and Manure to Cotton Grown on Rainfed Vertisols

A field experiment was conducted from 1985–1986 to 2002–2003 on Vertisols under rainfed conditions to evaluate the effect of cropping systems and application of fertilizers and manure on seed cotton yield. To determine the long‐term effects, trends and stability analyses were performed. Soil samples (0–0.15 and 0.15–0.30 m) were collected at the end of year 18 and analysed for available P and AB‐DTPA extractable Zn. Among cropping systems, Asiatic diploid cotton (Gossypium arboreum) yielded 233 kg ha^?1 more seed cotton than the upland tetraploid cotton (Gossypium hirsutum). Yield trend was positive for G. arboreum compared with G. hirsutum. However, the slope was not significant. Stability analyses indicated overall higher yield stability for G. arboreum than G. hirsutum. Compared with monocropping G. hirsutum, G. hirsutum–sorghum (Sorghum bicolor L.) (H‐S) rotation was significantly more stable. Soil samples (0–0.30 m) of the manure‐amended plots had significantly greater P and Zn content (above the critical limit) compared to those receiving inorganic fertilizers alone. With regard to nutrient management practices, seed cotton yield was the highest for the integrated nutrient management (INM) treatment receiving a combination of organic and inorganic fertilizers. Among primary nutrients, the effect of P was significant while that of K was not. Balanced fertilizer application was significantly better than treatments receiving N and NK. Yield trends were, in general, not significant. However, a positive trend was noticed for treatments receiving manure compared to fertilizer alone. Stability analysis, on the other hand, indicated that the slopes were, in general, significant. Among the nutrients, mean yield response with and without P was 1007 and 672 kg ha^?1 respectively. Combined application of manure and fertilizer (INM) resulted in the highest mean yield response (1218 kg ha^?1) and the slope was highly significant (P < 0.004). In the manure‐amended plots, a better nutrient status probably imparted a greater degree of yield stability. The present study suggests that compared to trend analysis, stability analysis being sensitive as it recognizes the treatment × environment interaction, is a better option to interpret results from long‐term agronomic experiments.     

Researching and Developing a Hybrid Electrical Vehicle

There are more than two power source in Hybrid Electrical Vehicle(HEV). By using of assist accelerating, power regeneration, Idle stop and power management, HEV gains more acceleration performance and more fuel economy and better gas emission than Conventional Vehicle(CV). With Integrated Starter and Generator(ISG) as a auxiliary power source, batteries and battery control module and power manage module as a Load leveling Device (LLD), two prototype HEV separately equipped Manual Transmission (MT) and Continuously Variable Transmission (CVT) was successfully developed.     

Indirect Regulation Pricing Methods of Public Utility

The author analyses the advantages and disadvantages of common indirect regulation pricing methods of public utility goods. It is pointed out that it results in high trade-cost and A-J effect binging in an excess of investment when capital yield method be used. It is not reasonable enough in setting PRI-X of PRI-X pricing method. An integrated indirect regulation pricing method is put forward which is to form a two-tier incentive mechanics both in expanding producing ability and improving efficiency. In initial stages of new public project, capital yield method should be used in order to activate investment motive. Upper-limit pricing method should be used in anaphase in order to improve the producing efficiency.     

Herbicide-tolerant crops in agriculture: oilseed rape as a case study

Oilseed rape has been modified extensively by conventional breeding for the production of varieties useful for human consumption (blended vegetable oil and margarine) and industrial processes (rubber additives and high‐temperature lubricants). Because much is now known about its genetic and biochemical composition, it has been an obvious choice for genetic modification and is now at the forefront of the commercial development of genetically modified (GM) or transgenic crops. Around the world, the increase in commercial plantings of all transgenic crops has been rapid. In 1996, 1.7 million hectares were planted, but by 1998 this figure had jumped to 27.8 million ha. The area in the year 2001 is likely to be about 50 million ha. With the possible introduction of transgenic varieties into European agriculture, it is essential that the associated farming practices employed are appropriate for their growth, both from a commercial and an environmental viewpoint. Some of the first transgenic crops are those carrying agronomic traits, e.g. herbicide tolerance transgenes. However, before full commercialization occurs, important agronomic and environmental questions need to be answered. How are these new crops to be incorporated into existing cropping practices? How will this change the current herbicide use profile for a given crop? Do herbicide‐tolerant varieties enhance or impede integrated pest management schemes? What is the likely uptake of such crops in agriculture? What are the ecological implications of their introduction? Are there effective measures to control the spread of transgenes to wild relatives? This paper addresses these questions, with special emphasis on oilseed rape production in the UK, but includes examples from other crops and countries where appropriate.     

黄土高原沟壑区小流域综合治理模式──以长武王东沟小流域为例

黄土高原沟壑区的小流域综合治理的目的是建立该区域高效农业生态经济系统。王东沟小流域实施综合治理１０年来成效显，体现在农村产业结构发生显变化，粮食生产持续发展，土地资源得到高效开发利用，小流域沟坡防蚀道路网建成，粮食单产１０年平均３７５０ｋｇ／ｈｍ＾２以上，农民人均纯收入由２３０增加到１３１３元，水土流失量由原来的１８６０ｔ／（ｋｍ＾２．ａ）控制在８００ｔ／（ｋｍ＾２．ａ）以下，林草覆盖率由１８     

松材线虫病综合治理技术及成效

采取专业公司3年承包机制对广东省龙眼洞林场松材线虫病进行治理,由监理单位监理,治理公司实施防治.技术措施采用综合防治法,进行检疫封锁、清除病死树、应用引诱剂和诱木剂诱杀天牛成虫、林间喷洒虫线清等,通过6年来的综合治理,发生面积逐年减少,病死树逐年下降,病死树率由2005年的25.79‰下降到2010年的0.86‰,疫情...     

基于网络集成的弧齿锥齿轮数字化闭环制造技术

为突破弧齿锥齿轮数字化闭环制造过程信息继承性与集成性低的局限,实现弧齿锥齿轮齿面数字化闭环过程的集成运行和齿面制造信息的集成管理,该文提出了一种弧齿锥齿轮的网络化闭环制造模型,建立了网络化闭环制造的运行机制,采用基于TCP/IP(transmission control protocol/internet protocol,传输控制/网络通讯协定)的分布式集成控制模式构建网络化闭环制造模型的通信网络,利用Web服务应用集成方法建立闭环制造过程信息集成机制,并通过设计开发闭环制造集成系统实现网络化闭环制造信息的集成统一管理。应用结果表明:该模型及其实现技术可行实用,实现了齿面制造过程的数字化和集成化运行,使齿轮副的齿面精度和啮合性能都得到明显提高。以该文的准双曲面齿轮副滚动检测试验为例,辐射噪声降低约7%,振动加速度幅值降低约15%。该研究为弧齿锥齿轮的网络化和集成化制造提供参考。