覆盖方式对旱地小麦花后旗叶抗氧化生理及粒重形成的影响

于2017—2018年和2018—2019年,在西北中部旱作雨养农业区以冬小麦‘康庄974’为试验材料,设秸秆带状覆盖(SM)、地膜覆盖(PM)和无覆盖对照(CK)共3个栽培处理,分析不同覆盖方式对小麦灌浆期土壤水分和温度及抗氧化能力的影响,探讨花后干物质积累量和粒重形成的关系。结果表明,随生育期推进,花后旗叶相对含水量(RWC)逐渐降低,丙二醛(MDA)含量逐渐升高,且PM较SM降、升幅度明显。与CK相比,覆盖显著提高花后旗叶抗氧化酶活性,增加渗透调节物质含量;开花时间越长,SM抗氧化酶活性升高的幅度越大,而PM主要提高花后7 d旗叶抗氧化能力。SM和PM的粒重分别较CK增加14.3%和19.1%(P<0.05)。相关分析表明,土壤水分(SW)是影响旗叶生理活性的关键因子,提高SW,有利于增加RWC(r=0.84^**),从而提高旗叶抗氧化能力,其中RWC和抗坏血酸酶(ASA)活性呈极显著正相关关系(r=0.82^**);ASA活性和脯氨酸(Pro)含量呈极显著正相关关系(r=0.94^**),和MDA含量呈极显著负相...     

赤霉素和磷肥配合施用对胡麻光合酶活性及其产量形成的影响

为探究赤霉素和磷肥配合施用对胡麻叶片光合酶活性以及籽粒产量的影响,以‘轮选2号’为材料,采用田间二因素裂区试验设计,研究了不同磷肥用量水平(P₀:0 kg·hm^-2 P₂O₅,P₁:67.5 kg·hm^-2 P₂O₅,P₂:135 kg·hm^-2 P₂O₅)和赤霉素(Gibberellin acid, GA₃)喷施浓度(G₀:0 mg L^-1,G₁:15 mg·L^-1,G₂:30 mg·L^-1)对胡麻光合同化酶活性、干物质积累量及籽粒产量的影响。结果表明：施磷和喷施赤霉素均显著提高了胡麻叶片RuBP(Ribulose-1,5-bisphosphate)、PEP(Phospho...     

不同粒度猫尾草对羔羊体外发酵特性和微生物数量的影响

通过Rusitec-s体外发酵系统研究不同粒度猫尾草对羔羊体外发酵参数与微生物数量的影响,选取6种不同粒度(1.00、2.36、3.35、4.75、8.00和12.50 mm)的猫尾草作为试验饲粮的纤维来源,按照猫尾草的粒度将试验分为6个处理组,每个处理4个重复,利用Rusitec-s型人工瘤胃模拟装置进行48 h体外发酵,测定养分降解率、发酵参数及发酵液中6种微生物菌群的拷贝数。结果表明：与其他处理组相比,2.36 mm组显著提高了体外中性洗涤纤维降解率(IVNDFD)、丁酸、异丁酸、戊酸、异戊酸摩尔比和溶纤维丁酸弧菌(B. f)数量(P<0.05),且显著降低总产甲烷菌(TMe)数量(P<0.05)。总菌(TB)与氨态氮(NH3-N)浓度、乙酸摩尔比呈正相关(R²=0.84,P=0.038;R²=0.88,P=0.021);B. f数量与丙酸摩尔比呈正相关(R²=0.82,P=0.045),且与pH呈负相关(R²=-0.98,P=0.001);TMe数量与体外粗蛋白质降解率(IVCP...     

粮食营养价值的缺陷与对策

文章详细了粮食营养价值的缺陷，如蛋白质的质量，氨基酸的比例等，重点介绍了改善这种状况的三种方法。     

小麦雄性不育系保持系过氧化物酶同工酶的比较研究

从小麦雄性不育系、保持系的10个不同组织、器官中共检测出8种过氧化物酶,在叶、芽鞘、根、节、节间、穗轴、叶鞘和芒中,不育系和保持系的过氧化物酶基本相同,说明这种酶由细胞核编码,但在花粉粒发育的3个不同时期,不育系与保持系间的过氧化物酶有明显差异,表现为不育系中的过氧化物酶同工酶多于保持系,这可能是由于不育系中细胞质不育基因对核基因的表达有调控作用,这种调控作用表现为不育细胞质基因的去阻遏作用,即不育细胞质基因可以去除细胞核中编码过氧化物酶基因的阻遏作用,使不育系中有更多的过氧化物酶基因得以表达,造成不育系中过氧化物酶同工酶多于保持系的现象.     

大豆属Clycine亚属植物花粉形态研究

对大豆属Ｇｌｙｃｉｎｅ亚属中０个种的花粉进行了光学显微镜和扫描电镜的观察。发现多倍体材料的花粉大于二倍体的。并发现Ｇｌｙｃｉｎｅ亚属诸种花粉的形、萌发孔、外壁纹饰均存明显差异。     

Dropwise Condensation Heat Transfer Coefficient on the Horizontal Circular Surface with Radial Gradient Surface Energy

A theoretical model is developed for the dropwise condensation heat transfer on the horizontal circular surface with radial gradient surface energy based on the heat transfer model of individual condensate drop and the size distribution model of condensate drop on homogeneous condensation surface.The effect of variation of contact angle on the gradient surface on condensation heat transfer and condensate drop size distribution is taken account of in this model.The theoretical calculation method was obtained to predict the dropwise condensation heat transfer coefficient on the horizontal circular surface with radial gradient surface energy under various wall subcooled temperature,contact angle profile on wall surface,and working fluid.The effects of surface energy gradient,wall subcooled temperature,and thermophysical properties of condensate on the condensation heat transfer are discussed respectively.The calculation results show that the condensation heat transfer coefficient increases slightly with the increase of wall subcooled temperature.As latent heat and surface tension increasing,the condensation heat transfer coefficient increases.A larger surface energy gradient induces a larger condensation heat transfer coefficient.     

Design for Precision Measurement System Based on Machine Vision

It is difficult to measure the geometric quantity of small parts in finishing, assembling and measuring, because it's easy to break the workpieces' surface and alter their position by means of traditional contact measuring methods.There are some non contact measurers, such as,light feeler pin and interference microscope etc., because of it's high price and strict working conditions,so it's difficult to promote them in widely use. Precision measurement system based on machine vision has the advantages of non contact measuring as well as high performance and low price. Some problems, such as light source, algorithm of edge fitting, auto focusing,are discussed.