电车接触网腕臂的计算

电气化铁道的“三大元件”分为接触网、电力机车和牵引变电所。本论文论述时速200Km/h高速电气化铁路的接触网电车接触网腕臂的计算,接触网的计算精确程度就关系到接触线悬挂的可靠程度,故接触网计算是设计中基础的工作内容,其计算主要分为腕臂的计算和接触网的负载计算。文章详细分析了腕臂长度的计算方法,重点介绍了路基曲线区段腕臂长度、转换柱和中心柱腕臂长度的计算。     

Study on Length Polymorphism of KAP1 Family Genes in Yak (Bos gurnniens)

This study was aimed to understand the characteristics of length polymorphism with repeat sequence of keratin associated protein 1 (KAP1) family genes in yak. KAP1 family genes of yak and cattle were sequenced, and compared with sheep KAP1 family gene sequences. The results showed that cattle KAP1 family genes were located in chromosome 19, according to location of sheep KAP1 family genes in the chromosome and similarity with cattle KAP1 family genes, renaming the cattle KAP1 family (according to the gene location of chromosome) B2D, B2A, KAP1-1 and B2C genes into KAP1-4, KAP1-1, KAP1-2 and KAP1-3 gene, respectively. KAP1 family genes in the 3'and 5' flank were highly conserved, the difference between family genes mainly in the the repeat sequence region, which yak KAP1 to KAP4 genes were found 30 bp length polymorphism. There were B(CCQTS)A₁(CCQPT) repeat sequence and a new repeat sequence C(SIQTS). The results indicated that the repeat sequence was the key of the polymorphism of KAP1 family genes, which might be relate to combination with keratin protein.     

Using of AFLP Marker to Predict the Hybrid Yield and Yield Heterosis in Rice

利用AFLP分子标记对46个水稻品种进行遗传多样性分析,继而研究分子标记遗传距离与按照NC设计获得的195个杂交组合的产量及特殊配合力的相关性,探讨预测杂种优势的可能性。结果表明:(1)通过UPGMA聚类分析(图3),可将供试材料分为16个类群,并把来源不明的品种(系)划分到相应类群中,从而对这些材料进行初步鉴定。可见,AFLP分子标记是检测类内品种间遗传差异的有效方法,为水稻品种(系)亲本选配提供理论依据。(2)分子标记遗传距离与杂种产量优势、F1产量、特殊配合力之间都呈显著正相关,相关系数介于0.3235-0.7713之间。但相关程度还不足以预测杂种优势。增效座位和减效座位以及使用与杂种优势有关的QTL连锁标记位点可能提高杂种优势的预测能力,但最终解决,将依赖于杂种优势遗传机理的研究。     

Experimental Study on the Extended Length of Negative Reinforcement Cut-in Phases in Continuous Beams

In this paper through the static loading tests of 6 inflexion zones and 2 cantilever zones in full-size constrained R/C beams, the stress performance in rebars cut-in-phases and subjected to negative moment is studied. The stress properties of extended length of rebars with different shear-span ratiosare analysed on basis of the full measurement of strain distributions combined with the investigation on state and regularity of the diagonal cracks development and series of new knowledge are obtained. It is found that current Concrete Design Code provisions on the extended length are inadequate for the high shear-span ratio and superfluous for the low shear-span ratio. The theoretical and experimental foundations are provided for determining proper value of extended length for rebars cut-in-phases.     

CALCULATING SYSTEM FOR SECOND-ORDER EFFECT IN THE COLUMNS OF REINFORCED CONCRETE FRAMES

This paper makes an analysis and comparison of the calculatingsystem for second-order effect in columns of reinforced concrete frames proposedby scholars at home and abroad,and the systems adopted by codes of manycountries.The focus is on explaining the conceptual error and deficiency in somemethods.After expounding the basic law of the second-order effect in framecolumns with different restraints,this paper suggests an improvement of thecalculating system for second-order effect in frame columns for China's DesignCode of Concrete Structures.     

低压射流不同喷嘴参数及压力下破碎过程实验

研究了不同低压下喷头喷嘴直径和喷嘴锥角对射流破碎的影响。采用高速摄像仪对低压圆柱射流的射流核心长度和射流破碎长度进行实验,测量了不同喷嘴结构的流量、射程和末端水滴直径。结果表明:同一压力下,当喷嘴锥角不变时,随着喷嘴直径的增大,喷头流量、射程和喷头末端水滴直径都变大,射流核心长度和破碎长度均增大;当喷嘴直径不变时,随着喷嘴锥角的增大,喷头流量逐渐减小,而喷头射程呈先增大后减小趋势,喷头末端水滴直径也变大,射流核心长度逐渐减小,射流破碎长度先减小后增大。综合考虑射程和雾化效果,直径为5 mm、锥角为45°的喷嘴为最优选择。同时通过对不同Re数和We数的实验和分析,给出了适合低压喷嘴的两种射流特征长度的拟合关联式。     

补偿式滴头的研制

补偿式滴头是微灌设备中最理想的灌水器,它除能保持滴水量衡定、提高灌水质量外。还具有减缓堵塞、自身清洗之功能,而且能降低工程造价。国产补偿式滴头研制成功,填补了国内空白,也为进一步开展补偿式灌水器研究积累了经验。     

乙烯受体ETR1基因同源性分析及乙烯敏感性与植物采后寿命的关系

将37种不同科属植物及5个不同月季品种的ETR1核苷酸、氨基酸序列进行同源性分析并构建了分子系统发生树,并对植物的呼吸跃变类型、乙烯敏感性及采后寿命的关系进行了归纳和分析.结果表明,在核苷酸水平上,分子性状的同源性与形态性状同源性具有一致性,但月季不同品种种间差异大于异源植物的属间差异.氨基酸序列的同源性分析结果与核苷酸相似,但仍存在差异,可能由于氨基酸密码子简并性、翻译起始位置的不同、ETR1片段大小的差异所造成.在蛋白质水平上,所分析的ETR1片段均具有高度保守结构域.植物的呼吸跃变类型虽与内源乙烯的生成有密切的关系,但与外源乙烯的敏感性无直接关系;植物对外源乙烯的敏感性与植物采后寿命的关系更为密切.     

柑橘裂皮类病毒广东分离物YC全长cDNA序列克隆及分析

柑橘裂皮类病毒(Citrus exocortis viroid, CEVd)是危害柑橘的重要病原之一,认清该类病毒的分子特性是进一步研究其致病机制的前提.本文利用RT-PCR技术对广东分离物YC的全长cDNA序列进行了扩增、克隆,获得了全长372bp的片段,对该片段进行测序及分析显示:CEVd广东分离物YC的分子结构域包括5个功能区即左手末端区(TL)、致病区(P)、中央保守区(C)、可变区(V)和右手末端区(TR).通过与GenBank已登陆序列的比对分析发现:与来自西班牙的分离物CEVd-f-1(登陆号:EF494677.1)的同源性高达98%;与湖北分离物CEVd-HB(登陆号:AY456136)的同源性仅为92.7%;与强度株系CEVd-A(登陆号:M30868)的同源性为96.8%,与弱毒株系CEVd-de26(登陆号:K00965)的92.4%.说明该广东分离物YC分子特性更接近强毒株系.这是国内首次对柑橘裂皮类病毒cDNA的分子特性进行报道.