水生栖热菌FL-03海藻糖合酶的分离纯化及特性研究

将从水生栖热菌FL-03中获得的海藻糖合酶粗酶液经硫酸铵分级沉淀、DEAE Sepharose CL-6B离子交换层析S、ephacryl S-200HR凝胶过滤层析后,纯化68.48倍,产率为18.4%。研究表明:该酶分子量约为101 kD,最适反应温度为60℃,最适pH为7.0,在40~80℃、pH 6.0~9.0范围内具有较高的反应活性和稳定性。Fe3 对该酶具有一定的激活作用,Cu2 、Tris、Zn2 对该酶具有较强的抑制作用。该酶具有高度的底物特异性,只能专一地将麦芽糖转化为海藻糖。在40℃4、8 h条件下,麦芽糖转化为海藻糖的转化率最大可达到79%。     

黄粉虫壳聚糖溶液黏度特性的研究

了解壳聚糖溶解特性,对其应用及产品开发有重要意义。分别以甲酸、乙酸、盐酸为溶剂配制成一定浓度的黄粉虫壳聚糖溶液。测定了不同情况下黄粉虫壳聚糖溶液黏度的变化情况,试验结果表明:(1)黄粉虫壳聚糖溶液黏度随溶液浓度的增加而增加;(2)溶液黏度随存放时间的延长而降低;(3)溶液黏度随温度的升高而降低;(4)溶液黏度随溶剂中酸浓度增加和酸性增强而下降。     

烤烟主要物理性状与化学成分的典型相关分析

以烤烟品种K 326为供试材料,采用典型相关分析方法研究了烤烟不同部位烟叶的主要物理性状和化学成分的关系.结果表明,烤烟物理性状和化学成分所具有的显著性指标因部位而异;上、中、下3个部位物理性状共有的显著性指标是叶长、叶厚和叶面密度,化学成分共有的显著性指标是氯含量、钾含量和钾氯比,且后者对典型变量的相对作用大小一致,表现为钾>钾氯比>氯;烤烟不同部位烟叶叶长、叶厚和叶面密度与钾、钾氯比和氯的关系最为密切.典型负载系数可以作为确定各部位物理特性和化学成分显著性指标的重要依据.     

非农就业质量如何影响山区农户土地转出稳定性——基于浙江省4县480户农户的观察

为厘清非农就业质量对山区农户土地转出稳定性的影响机制,基于2021年浙江省山区4县480户农户调查数据,采取OLS、Heckman两阶段以及2SLS等模型开展实证研究,同时采取Probit模型检验作用机制并结合案例加以佐证。结果表明：1）非农就业质量的改善激励山区农户提高土地转出的稳定性。2）非农就业质量显著影响老一代农户和“体制外”农户土地转出的稳定性,但是对新生代农户和“体制内”农户的影响不显著,同时,非农就业质量对土地转出稳定性的影响并不因为就业距离的远近而产生差异;3）非农就业质量影响土地转出稳定性的作用机制在于强化农户的城市融入意愿、弱化农户对地租的偏好以及弱化土地的社会保障功能。相关政策需要致力于提升山区农户的非农就业质量,提升和完善非农就业的稳定性、收入和保障制度。     

猪源发酵乳杆菌的筛选及其潜在益生性能

【目的】对从健康仔猪粪便中筛选分离出一株发酵乳杆菌的益生性能进行测试,为其在畜禽动物养殖中的应用提供参考。【方法】采用Rogosa SL完全选择性培养基分离出106株乳酸菌,通过革兰氏染色、酸和胆盐耐受初步筛选出1株潜在的饲用乳酸菌,经16S rDNA序列鉴定为发酵乳杆菌LF1,并对其益生性能潜力进行评估,包括抑菌活性(针对大肠杆菌K88、金黄色葡萄球菌、猪链球菌、沙门氏菌以及弧菌等12种病原菌)、对模拟胃液中酸性环境的耐受性、对胆盐的耐受性以及对小肠上皮细胞的粘附性。【结果】发酵乳杆菌LF1耐酸和耐胆盐的能力较强,显示出较强的益生菌潜力,但LF1菌株对猪肠道上皮细胞的粘附能力不强。在生物拮抗作用方面,发酵乳杆菌LF1的培养上清可以显著抑制多种常见动物病原菌生长。【结论】发酵乳杆菌LF1具有较好的益生性能,通过进一步的动物实验评估后,可以作为应用于畜禽养殖业的益生菌候选菌株。     

Quality aspect of fish sauce prepared from underutilized fatty Japanese anchovy and rabbit fish

ABSTRACT:   To explore the potential utility of underutilized fish in the fish sauce industry, fish sauces were prepared from both raw and heat-induced meat of Japanese anchovy Engraulis japonica and rabbit fish Siganus fuscescens using wheat malt, and their quality aspects and sensory properties were assessed. Proximate composition of the fish meat represents protein as the major component (16.0–17.8%), other than moisture. Analyses of free amino acids, peptides including oligopeptides, and organic acids contents in fish sauces revealed suitability of both raw and heat-induced meat of the selected species in commercial fish sauce production. The variations in taste of raw meat fish sauces were species-specific, but the taste of fish sauces from heat-induced meat were similar.     

Chemical and Thermal Properties of Freshwater Prawn (Macrobrachium rosenbergii) Meat

Chemical compositions and thermal properties of cultured freshwater prawn meat (FPM) were studied. FPM contained 83.2% protein (dry basis), 62.7% of which was myofibrillar protein. Pepsin-soluble collagen (PSC) and insoluble collagen (ISC) contents were 0.63 and 0.32%, respectively. Both collagens were similar to type V collagen from porcine placenta. Glutamic acid/glutamine, arginine, aspartic acid/?asparagine, and lysine were abundant amino acids in FPM. Glycine, proline, hydroxyproline, and aspartic acid/?asparagine were predominant in both collagens. FPM exhibited thermal transition temperatures (T_max) of 48.3 and 64.7°C, whereas T_max of PSC and ISC were 43.0 and 46.0°C, respectively. Textural changes in FPM during post-mortem storage on ice are plausibly dependent upon its compositional and thermal properties.     

Fatigue property of high-performance polyethylene netting twine

Tensile and knot fatigue property of high-performance polyethylene (HPPE), regular polyethylene (PE), nylon multifilament (PAmu), and nylon monofilament (PAmo) under cyclic loading conditions were investigated. The durability of HPPE under tensile fatigue testing was largest, followed by PAmo, PAmu and PE. In knot fatigue, the largest was PAmo, followed by HPPE, PAmu, and PE. High resistance by HPPE to the cyclic loads was also confirmed by scanning electron microscopy, which showed that HPPE suffered the least damage from abrasion compared with the other twines. From the measurement of elongation changes during the cyclic loading, HPPE had very small changes. The low elongation value of HPPE was probably the result of its better fatigue property because there was less damage from abrasion.