Changes in the density and growth of brown trout (Salmo trutta) after intensive removal of sympatric Arctic charr (Salvelinus alpinus) in the sub‐Arctic lake Møkkelandsvatn,Norway

This study tests the basic hypothesis that the removal of charr, Salvelinus alpinus (L.), would cause an increase in both the growth and density of a sympatric trout population, Salmo trutta L. The charr population was characterised by slow‐growing individuals, with a high proportion of mature fish, that is typical for so‐called overpopulated populations. A total of 31,000 charr was removed from the lake in the period 1990–1992, and the density of younger trout (1+, 2+), but not older trout (3+, 4+), increased. The growth of older trout (3+, 4+) increased, but the evidence for similar growth increases of younger trout (1+, 2+) was limited. From 1989 to 1990, the proportion of trout increased from 30 to only 40% of the total catch, but from 1991 to 1994, it was significantly higher (60–80%) than that of charr. Total trout biomass increased to a maximum in 1992 and then decreased so that the biomass of 1994 was nearly similar to that of 1989, that is before the start of the charr removal. Back‐calculated lengths of trout from otoliths showed that 2+ and 3+ trout caught in the pelagic were growing consistently faster over previous years than those caught in the littoral, while this was not the case for the 4+ fish. Therefore, the hypothesis was partially supported; the growth rate of trout increased (age groups 1+ to 4+), while the density of juvenile trout (1+, 2+), but not the older trout (3+, 4+), increased after the removal of charr.     

海水中规模化培养西藏拟溞的技术优化研究

为了给北方海水鱼虾蟹类育苗增添一种新的生物活饵料,利用循环水培养装置研究了西藏拟溞Daphniopsis tibetana Sars在稀释海水(盐度为18~20)中规模化培养的技术工艺参数,即起始放养密度、充纯氧和日采收率。结果表明:起始放养密度对西藏拟溞种群增长和日产量影响显著(P0.05),不同起始放养密度(200、550、900、1250 ind./L)培养试验中,放养密度为1250ind./L时,培养第33天时种群密度达最高,为(9500±550.73)ind./L,平均日产量为(125.00±8.35)g/(m3·d);充纯氧与充空气相比较,充纯氧能显著提高种群密度和日产量(P0.05),当放养密度为1250 ind./L、充纯氧时,西藏拟溞种群密度最高达(11 600±560.45)ind./L,平均日产量为(156.82±8.49)g/(m3·d);日采收率对西藏拟溞的种群增长和日产量也有显著影响(P0.05),日采收率为20%时最佳,放养密度为1250ind./L、日采收率为20%时,西藏拟溞种群密度最高为(12 900±995.04)ind./L,平均日产量为(176.52±15.08)g/(m3·d)。     

薄型高密度纤维板生产设备的要求分析

对薄型中高密度纤维板生产设备的要求作了简要分析。

Abstract：

A brief analysis is made of the requirements for thin medium high density fiberboard product manufacturing equipment.     

种植密度对滴灌马铃薯生长、产量的影响

为了了解耕培土滴灌条件下种植密度对马铃薯生长、产量以及水分利用效率的影响.试验共设密度分别为7.28×10⁴ 株/hm²(RS25),6.67×10⁴ 株/hm²(RS35),5.55×10⁴ 株/hm²(CK)3个处理.结果表明:随着种植密度的增加,株高、茎粗、干物质积累量以及商品薯率均有降低的趋势;产量、水分利用效率随种植密度的增加表现出先增大后减少,其中RS35处理产量和水分利用效率均表现最高,分别达到47 325 kg/hm²和12.05 kg/m³;在马铃薯品质方面,种植密度对马铃薯粗蛋白含量的影响不具有统计学意义;淀粉和维生素C随着密度的大幅增加而降低,其中RS25处理的淀粉较CK降低了5.57%,RS25处理的维生素C较CK降低了7.96%,同时RS35与CK处理不具有统计学意义.综上所述,种植密度为6.67×10⁴ 株/hm²的RS35处理马铃薯高产优质,且水分利用效率最高,为黑龙江地区滴灌马铃薯较为适宜的种植密度.     

史密斯桉造林密度与施肥模式研究

针对史密斯桉造林密度与施肥模式进行了研究，对试验地设置3种造林密度作主区，4种施肥模式作副区。对17个月生史密斯桉的试验调查进行分析，结果表明：造林密度对树高生长量的影响差异不显著，而对胸径影响差异显著，适宜密度为2000株·hm^-2。施肥对史密斯桉幼树树高、胸径生长的影响极显著，不同的施肥模式对史密斯桉幼林生长的效果是：桉树专用肥>复混肥+微肥>复混肥+磷肥+微肥>复混肥+磷肥。     

氮肥与密度互作对单粒精播花生根系形态、植株性状及产量的影响

为明确花生单粒精播适宜的氮肥水平和种植密度,本研究于2018年和2019年以‘花育22’为供试花生品种,设置3个氮肥水平(0 kg hm~(–2), N0; 60 kg hm~(–2), N1; 120 kg hm~(–2), N2), 3个种植密度(7.93万株hm~(–2), D1; 15.86万株hm~(–2),D2; 23.79万株hm~(–2), D3),采用二因素裂区试验设计,研究氮肥、密度及其互作对单粒精播花生根系形态、植株性状及产量的影响。氮肥对花生根长、根表面积、根体积、根干重的影响不显著,而密度的影响显著。单株根长、根表面积、根体积及根系干重随密度的增加而降低, D1显著高于D2和D3, D2、D3处理间差异不显著;单位面积根长、根表面积、根体积及根系干重随密度的增加而增加, D1显著低于D2和D3, D2、D3处理间差异不显著。氮肥和密度互作对2019年收获期单位面积根长、根表面积的影响显著,与D1相比, N1处理下D3的增幅显著高于N0和N2处理。氮肥及氮肥与密度互作对植株性状的影响存在年度和时期间的差异,主茎叶片数、侧枝数和主茎第一节间粗随密度增加有降低趋势。氮肥对荚果产量的影响不显著,荚果产量随密度的增加呈增加的趋势。产量与根体积、根干重、主茎叶片数、主茎高及侧枝长呈显著正相关。综上所述,在本试验条件下,花生单粒精播适宜的氮肥(N)水平为60 kg hm~(-2),种植密度为18.8万株hm~(-2)。     

不同规格穴盘育苗对茄苗及其栽培效益的影响

为完善茄子穴盘育苗技术,对比研究了不同规格穴盘育苗的茄苗素质及栽培效益。结果表明:32孔规格穴盘育苗比50孔茄苗素质明显提升;移栽单栋钢架大棚后,32孔穴盘育苗的茄子早熟性比50孔穴盘育苗平均提前5 d,总产量增加15.3%;667 m~2投入成本32孔穴盘育苗比50孔穴盘育苗增加75.3%(35.6元),而收益增加了2 427.9元。因此建议大棚茄子种植采用32孔规格穴盘进行育苗。     

密度与环境因子对蒙古黄芪育苗影响研究

为了明确育苗时密度与环境因子对蒙古黄芪生长特征影响,本试验以蒙古黄芪为研究对象,通过单因素田间随机区组试验,测定蒙古黄芪株高、茎粗、根粗和根长4个指标。结果表明,密度对蒙古黄芪影响最大,其次是湿度,最后是光照和电导率。密度与蒙古黄芪株高、茎粗、根粗呈现负相关性,与根长呈正相关性(P<0.05),密度为400株/m ²时,株高、茎粗及根粗最大,密度为1000株/m ²时根长最大。     

Short time effects of biological and inter-row subsoiling on yield of potatoes grown on a loamy sand,and on soil penetration resistance,root growth and nitrogen uptake

Soil compaction, especially subsoil compaction, in agricultural fields has increased due to widespread use of heavy machines and intensification of vehicular traffic. Subsoil compaction changes the relative distribution of roots between soil layers and may restrict root development to the upper part of the soil profile, limiting water and mineral availability. This study investigated the direct effects of inter-row subsoiling, biological subsoiling and a combination of these two methods on soil penetration resistance, root length density, nitrogen uptake and yield. In field experiments with potatoes in 2013 and 2014, inter-row subsoiling (subsoiler) and biological subsoiling (preceding crops) were studied as two potential methods to reduce soil penetration resistance. Inter-row subsoiling was carried out post planting and the preceding crops were established one year, or in one case two years, prior to planting. Soil resistance was determined with a penetrometer three weeks after the potatoes were planted and root length density was measured after soil core sampling 2 months after emergence. Nitrogen uptake was determined in haulm (at haulm killing) and tubers (at harvest). Inter-row subsoiling had the greatest effect on soil penetration resistance, whereas biological subsoiling showed no effects. Root length density (RDL) in the combined treatment was higher than in the separate inter-row and biological subsoiling treatments and the control, whereas for the separate inter-row and biological subsoiling treatments, RLD was higher than in the control. Nitrogen uptake increased with inter-row subsoiling and was significantly higher than in the biological subsoiling and control treatments. However, in these experiments with a good supply of nutrients and water, no yield differences between any treatments were observed.     

AM80-0.2Sr-1.5Ca镁合金高温压缩过程动态再结晶模拟

在Gleeble-1500热压缩实验机上对AM80-0.2Sr-1.5Ca镁合金进行高温压缩实验，得到了该合金在温度为300~450 ℃、应变速率为0.01~1 s-1条件下的流变应力曲线.结合改进的Laasraoui-Jonas（L-J）位错密度模型和Kock-Mecking（K-M）位错密度模型，获得AM80-0.2Sr-1.5Ca镁合金在改进的L-J位错密度模型中的应变硬化参数和应变软化参数，建立该合金的动态再结晶模型.利用DEFORM-3D软件，实现了对AM80-0.2Sr-1.5Ca镁合金在450 ℃热压缩实验时微观组织演变和位错密度变化过程的有限元模拟，并与实际热压缩实验微观组织进行对比.研究结果表明：在相同的温度和应变量下，应变速率较低时，AM80-0.2Sr-1.5Ca镁合金组织粗大且晶粒分布不均，随着应变速率增大，再结晶组织细小均匀模拟与实验结果一致，说明求解的应变硬化参数和应变软化参数准确，所建立的动态再结晶模型能准确预测该合金高温压缩过程动态再结晶过程.