Performance evaluation of venturi aeration system

The venturi aeration is an effective practice to increase the dissolved oxygen accessibility in the water bodies. This study aims to optimize the various geometrical parameters of the venturi aeration system. A non-dimensional technique was applied to find the optimum performance of various geometric parameters i.e. throat lengths (t_l), number of air holes (N), and converging and diverging angles (α and β). These experiments have been carried out using 1124 L capacity of tank having dimensions of 105 cm long, 105 cm wide and 102 cm deep. The experiments were conducted at a constant flow velocity of water (1.096 m/s) with varying throat length (t_l = 20–100 mm keeping 20 mm as interval between two consecutive length), number of air holes (N = 1–17 at an equal hole to hole distance of 5 mm between them), and converging and diverging angles (α and β = 10°, 15°, 20° and 25°). Multiple non-linear regression equations were also developed from the linear relation with the dependent variable (Non-dimensional form of standard aeration efficiency, NDSAE) and independent variables (t_l and N). With the geometrically optimized venturi aerator the optimum performance was found for t_l =100 mm, N = 17, and α and β = 15°. The maximum value of standard oxygen transfer rate (SOTR) and standard aeration efficiency (SAE) obtained was 0.0216 kgO₂/h and 0.611 kgO₂/kWh respectively. From the non-dimensional study, it was found that the NDSAE is the function Reynolds number (Re) and Froude number (Fr). The simulation equations were developed on the basis of Re and Fr for NDSAE, and subjected to 7.378 × 10⁻⁶ < Re < 3.689 × 10^-5 and 0.163 < Fr < 0.817, respectively.     

红素氧还蛋白研究进展

自然界中大多数的红素氧还蛋白(rubredoxin)集中来自严格厌氧菌,包括细菌、古菌和少数微需氧细菌,而植物中该类蛋白相对较少,它的功能主要表现在作为辅因子或电子供体参与多个生化途径。也有研究显示,无论是植物中还是微生物中的红素氧还蛋白基因在协助生物抵御氧化胁迫方面均发挥着重要的作用。本文全面介绍自然界中的红素氧还蛋白基因的分布、结构以及在微生物、植物中所发挥的作用等,希望能为今后的进一步研究提供参考。     

河南省承接产业转移的现状和特点

本文就河南省承接产业转移的需要,把快速调整产业结构、实现跨越式发展的现实,区域间的产业梯次分布转移的前提,河南省承接产业转移的时机条件,承接产业转移的势头,以及面临的差距、面临的竞争形势、区域竞争形势进行了阐述。     

抗滑桩优化设计在滑坡治理中的应用研究

基于传统剩余推力法，提出了新的抗滑桩优化方法。以位于凉山彝族自治州某县城南的滑坡体为例，说明了主要治理方法。采用剩余推力法和新的抗滑桩优化方对该滑坡体天然状态工况进行了稳定分析。结果显示，在设计安全系数为1．15的情况下，该滑坡处于临滑状态，因此，须采取相应的加固措施，最后推荐了抗滑桩设计方案，已在凉山州某县城滑坡工程中成功实施。     

Production and Identification of Clone Sheep Using Bone Marrow Mesenchymal Stem Cells as Donor Cell

In order to obtain the cloned sheep using bone marrow mesenchymal stem cells（BMSCs）as the donor cells,the BMSCs of sheep were chosen and reconstructed embryos were built to transfer.10 published microsatellite markers were chosen,and the DNA samples from clone sheep,donor cells and surrogate ewes were amplified,and the relationship of father-son（RCP）was analyzed using the Quantity One for genotyping.The results showed that the reconstructed embryos were successfully built for electric fusion using sheep BMSCs as nuclear donor,and making nuclear transplantation into enucleated mature oocytes of which the fusion rate was 80.62%.20 surrogate ewe were chosen to be implanted with the reconstructed embryos at morula stage by implant surgery,and 5 lambs were born and only 3 were survived.The genotype of cloned sheep was in line with the dornor cell and the RCP were more than 99.999%.In conclusion,the first clone sheep were obtained successfully by using BMSCs as a nuclear donor in this experiment.     

Improved development of somatic cell cloned bovine embryos by a mammary gland epithelia cells in vitro model

Previous studies have established a bovine mammary gland epithelia cells in vitro model by the adenovirus-mediated telomerase (hTERT-bMGEs). The present study was conducted to confirm whether hTERT-bMGEs were effective target cells to improve the efficiency of transgenic expression and somatic cell nuclear transfer (SCNT). To accomplish this, a mammary-specific vector encoding human lysozyme and green fluorescent protein was used to verify the transgenic efficiency of hTERT-bMGEs, and untreated bovine mammary gland epithelial cells (bMGEs) were used as a control group. The results showed that the hTERT-bMGEs group had much higher transgenic efficiency and protein expression than the bMGEs group. Furthermore, the nontransgenic and transgenic hTERT-bMGEs were used as donor cells to evaluate the efficiency of SCNT. There were no significant differences in rates of cleavage or blastocysts or hatched blastocysts of cloned embryos from nontransgenic hTERT-bMGEs at passage 18 and 28 groups (82.8% vs. 81.9%, 28.6% vs. 24.8%, 58.6% vs. 55.3%, respectively) and the transgenic group (80.8%, 26.5% and 53.4%); however, they were significantly higher than the bMGEs group (71.2%, 12.8% and 14.8%), (p < 0.05). We confirmed that hTERT-bMGEs could serve as effective target cells for improving development of somatic cell cloned cattle embryos.     

Natural hybridization between wheat (Triticum aestivum L.) and its wild relatives Aegilops geniculata Roth and Aegilops triuncialis L.

BACKGROUND

Cultivated bread wheat (Triticum aestivum L.) spontaneously hybridizes with wild/weedy related Aegilops populations, but little is known about the actual rates at which this hybridization occurs under field conditions. It is very important to provide reliable empirical data on this phenomenon in order to assess the potential crop–wild introgression, especially in the context of conducting risk assessments for the commercialization of genetically modified (GM) wheat, as gene flow from wheat to Aegilops species could transfer into the wild species genes coding for traits such as resistance to herbicides, insects, diseases or environmental stresses.

RESULTS

The spontaneous hybridization rates between wheat and A. geniculata and A. triuncialis, which are very abundant in the Mediterranean area, have been estimated for the first time in the northern part of the Meseta Central, the great central plateau which includes the largest area of wheat cultivation in Spain. Hybridization rates averaged 0.12% and 0.008% for A. geniculata and A. triuncialis, respectively. Hybrids were found in 26% of A. geniculata and 5% of A. triuncialis populations, at rates that can be ≤3.6% for A. geniculata and 0.24% for A. triuncialis.

CONCLUSION

The detection of Aegilops spp.–wheat hybrids in Aegilops populations indicates that gene flow can occur, although wheat is considered a crop with a low-to-medium risk for transgene escape. These data on field hybridization rates are essential for GM wheat risk assessment purposes. © 2023 Society of Chemical Industry.     

Experiment for Condensing Heat Transfer Performance in a New Type of Horizontal Three Dimensional Inner Microfin Tubes

A new type of three dimenstional inner microfin tube is devoloped. Under four different pressures and in the range of condensing mass velocities from 33 to 153 kg/m2 . s,and by the experimental study of the three kinds of tubes with different microfin parameters, the performances of the condensation heat transfer for R11 in the horizontal microfin tubes and obtained. The experiments show that the inner microfin tube is a hopeful and nighty effective condensing heat transfer enhancement tube.     

Dropwise Condensation Heat Transfer Coefficient on the Horizontal Circular Surface with Radial Gradient Surface Energy

A theoretical model is developed for the dropwise condensation heat transfer on the horizontal circular surface with radial gradient surface energy based on the heat transfer model of individual condensate drop and the size distribution model of condensate drop on homogeneous condensation surface.The effect of variation of contact angle on the gradient surface on condensation heat transfer and condensate drop size distribution is taken account of in this model.The theoretical calculation method was obtained to predict the dropwise condensation heat transfer coefficient on the horizontal circular surface with radial gradient surface energy under various wall subcooled temperature,contact angle profile on wall surface,and working fluid.The effects of surface energy gradient,wall subcooled temperature,and thermophysical properties of condensate on the condensation heat transfer are discussed respectively.The calculation results show that the condensation heat transfer coefficient increases slightly with the increase of wall subcooled temperature.As latent heat and surface tension increasing,the condensation heat transfer coefficient increases.A larger surface energy gradient induces a larger condensation heat transfer coefficient.     

Analysis of Heat Transfer and Optimal Parameters of Multi-louvered Fin Condenser

The authors conduct the experimental study and optimal computing for the condenser of automobile air conditioner. The especially the properties of heat transfer and flow at the side of air when using shutter fin. The authors the influence of several combinations of fin's geometry parameter to heat transfer and flow resistance. The maximal heat transfer is used as a criterion relation to select the fin's geometry parameters in the same facing air area of condenser. Furthermore, a program is designed to conduct optimal computing, and the computing results are basically consistent with experimental results. It shows that the optimal method is reasonable and the results can be applied to engineering practice.