粤选1号匍匐翦股颖新品系果岭草坪 夏季性状及高温胁迫效应

粤选1号匍匐翦股颖新品系是丛Penncross建坪的老果岭中分离出的无性系。在广州地区夏季果岭草坪密度、绿叶盖度、叶片老化指数、抗坏血酸含量显著高于原品种Penncross，叶片质膜相对透性低。持续高温(36℃)胁迫下，新品系叶片中游离脯氨酸含量显著增加，而原品种在高温胁迫第3d才开始显著增加，新品系游离脯氨酸含量明显高于原品种；高温胁迫下新品系叶片可溶性蛋白含量增加并高于Penncross，而Penncross在高温胁迫2d后显著下降；新品系匍匐茎可溶性糖含量增加，高温胁迫5d后，Penncross显著高于新品系；新品系匍匐茎淀粉含量显著高于Penncross；高温胁迫对叶片相对含水量和叶绿素含量无明显影响。     

小麦品种无性系变异改良技术研究

针对晋阳345和晋麦73两个定型品种存在抗寒性较差的缺点,对其幼胚愈伤组织进行了4种处理:1、愈伤组织在MD培养基上继代2～3次;2、愈伤组织在紫外灯下约10cm照射2h;3、愈伤组织在低温2℃和常温25℃下交替培养30d;4、愈伤组织在紫外灯下照射2h后,再在低温2℃和常温25℃下交替培养30d。结果表明,4个处理后代R2主要农艺性状的变异率差异显著,且紫外灯照射幼胚愈伤组织的变异率比低温2℃和常温25℃交替处理幼胚愈伤组织高,其后代各种农艺性状的变异范围较大,变异率较高。但后者有利于改良抗寒性较差的定型小麦品种。     

Control Strategy and Simulation Study on NiMH Battery Quick Charging for Regenerative Braking of HEV

Based on the result of NiMH battery performance experiments, changing trend of maximal temperature and difference in temperature of HEV NiMH battery in different SOC and different charging current is analyzed. Considering the working situation of HEV NiMH battery and the theory of battery quick charging, a control strategy for NiMH battery quick charging is described which adapts to HEV regenerative braking system based on Mascc law. By Modeling and simulating the process of NiMH battery quick charging with this strategy, constant voltage charge method and constant current charge method, validates this control strategy.     

Saturation and Parameter Variation Influence Precision of Observer

The authors analyze the influence in vector controlled induction machine caused by parameter variation and main flux saturation affects speed estimation of adaptive state observer. According to simulation of the modified scheme with saturated induction motor model, it is proved that when the vector control scheme operates in field weakening region, the main flux saturation will obviously influence precision of speed observer and bring great error of speed estimation. Thereby, the main flux saturation should be compensated to improve performance of the vector control system.     

Analysis on Longitudinal Cracks and Deflection of the Pre-stressed V-shape Slab Roof Structure

In this paper, the finite element method is used to analyze the behavior of the prestressed V-shape Slab Roof structure, especially the effect of temperature change on the stress of slab. The calculated results indicate that when the temperature changes, the tensile stress at the lower extreme fibers of the flange plate near rib exceeds the tensile strength of concrete subjected to the combined action of triaxial stresses and results in the longitudinal cracks of the flange plate. The deflection analysis is based on the mechanical model of the prestressed V shape slab with the longitudinal cracks. The calculated results are in general agreement with the field observations.     

Artificial Neural Networks Models for Flow Stress during High Temperature Plastic Deformation of Al-Li Alloy

Using gained experimental data to develop the models of stable flow stresses at high temperature plastic deformation by statistical methods for alloy materials, precision of the models is poor and at the same time the processes of modeling are complicated with great workload. On the basis of the data obtained on Gleeble-1500 Thermal Simulator,the predicting models for the relation between stable flow stress during high temperature plastic deformation and deformation strain, strain rate and temperature for 1420 Al-Li alloy have been developed with BP Artificial Neural Network method. The results show that the model on basis of BPNN is practical and it reflects the real feature of the deforming process. It states that the difference between the real value and the output of the model is in order of 5 percent.     

Numerical Simulation of Flow field and Temperature field in Combustion Chamber Widened Suddenly

The flowfield and temperature field are numerically Simulated by the mathematical model of the fluid flow and heat transfer in circular combustion chamber widened suddenly. The distributions and influence factors of the flow field and temperature field are studied in it. The results have the guiding significance for the design of combustion chamber. The mathematical models can serve as the quantitative analysis methods for design.     

Recommendations on Shrinkage and Temperature Reinforcements in Concrete Slabs

The mechanism of shrinkage cracking is discussed with a simple member, which is fully restrained and subjected only to an axial restraining force caused by shrinkage, while a simple procedure is presented for the determination of the number and spacing of the cracks and the average crack width. With the simple model, some examples are shown to compare the provisions for minimum shrinkage and temperature reinforcement in GB 50010-2002 Code, ACI 318-02 Code and AS 3600-1988 Code. The results show that the provisions in GB 50010-2002 Code are too weak in comparison with the others. Finally, some recommendations are proposed.     

EFFECT OF MICRO-GALLIUM ON THE INTERGRANULAR SEGREGATINN OF PHOSPHORUS IN CARBON STEELS

The effect of small amounts of gallium on the intergranular segregation of phosphorus in carbon steels is discussed, with the help of the impact test, fracture morphology and micro-structure analyses, combined with composition analysis on the fracture surfaces by Auger electronspectrometer. The results show that gallium in the steel with a content of gallium more than ten thou-sandth can suppress, to some extent, the intergranular segregation of phosphorus and retard the tempering process. As a result, the temper embrittlement of the steel disappears and the embrittlement transition temperature declines.