Root zone temperature alters storage root formation and growth of sweetpotato

Large mounds amended with plant residues are a common cultivation method for sweetpotato (Ipomoea batatas) in the western parts of the Papua New Guinea highlands, with a suggested benefit of elevated root zone temperature (RZT) from decomposition. This study aimed to evaluate whether RZT affects the formation and growth of sweetpotato storage roots. Experiments evaluated the effects of a constant elevated RZT on the Beauregard cultivar and of a short‐term increase in RZT on the Beauregard and Northern Star cultivars. Plants were grown in 18‐L pots divided into a control compartment (constant RZT at 20°C) and a treated compartment (RZT at 30, 40 or 50°C). Constant elevated RZT was maintained until harvest, while short‐term increase in RZT occurred in weeks 2 and 3 only. Constant elevated RZT did not affect the total number of storage roots, but RZT of 30°C and above reduced the dry‐biomass of storage roots. The short‐term increase in RZT did not alter the total number or dry‐biomass of storage roots in Beauregard, while both of these attributes were reduced at RZT of 40°C or above in Northern Star. Elevated RZT inhibited dry‐biomass accumulation of storage root, with a more pronounced impact at constant elevated RZT. These results demonstrate that any benefits of the mound culture on sweetpotato yield production do not arise through the influence of temperature elevation.     

超甜玉米子粒果皮柔嫩度的变化规律

为了探讨超甜玉米果皮柔嫩度在子粒发育进程中的变化规律,以10份超甜玉米自交系为材料,采用硬度计法测定子粒发育过程中果皮柔嫩度值,分析果皮柔嫩度在不同环境条件下的变化。结果表明,10份参试材料在果皮柔嫩度上存在梯度差异,其中PE10果皮柔嫩性最好,T105中等,S33205最差;在湖北武汉(2014年春)、海南陵水(2014年冬)两种环境下,在授粉后第12~24天,PE10、T105、S33205的果皮柔嫩度值均呈上升趋势,且各测定时间点的柔嫩度均值由大到小的顺序均为S33205、T105、PE10;随着子粒的发育,相同材料在不同环境条件下果皮柔嫩度差异呈现先增大后缩小最后又趋于一致的规律;2014年湖北武汉春季与海南陵水冬季相比,同一材料最适采收期相差4 d,但最适采收期的果皮柔嫩度值差异不显著,说明环境改变会影响果皮嫩度变化速率,但果皮柔嫩度的好坏本质上仍决定于材料本身。     

温度传感器在大功率采煤机摇臂故障诊断技术中的应用

为了减少大功率采煤机的故障率,在典型部件摇臂上安装了温度传感器,及时准确的获取摇臂温度信息,首先通过故障预警使采煤机故障达到防患于未然,然后通过故障信号简便的判断故障产生原因,大大的减少故障率和故障排查与维修时间。此方法结构简单,使用方便,对以后的推广奠定了一定的基础。     

Reducing crude protein variability and maximizing savings when formulating corn-soybean meal-based feeds

Crude protein in corn and soybean meal have been documented to vary, and such inherent variability can result in under- or over-feeding of CP when feeds are formulated, leading to reduced bird growth, added input costs, and increased environmental pollution. The purpose of this study was to compare 2 grain-handling techniques and 2 feed formulation methods (linear vs. stochastic programming) to reduce CP variability in finished feeds and determine resulting costs or savings. The 2 grain-handling techniques were placing all the random batches of each delivered ingredient in to (1) a single bin (1-bin method) or (2) segregating above- and below-average samples into 2 bins (2-bin method). A fast way of estimating the composition of the ingredients is now available (near-infrared reflectance spectroscopy). Microsoft Excel workbooks were constructed to solve broiler starter feed formulation problems. Formulating feeds by linear and stochastic models based on the 2-bin method reduced CP variability by at least 50% compared with the 1-bin method. Formula cost was reduced by ˜20 cents per ton (averages of August 2012 United States ingredient prices) when the 2-bin method was used with the linear model. Formulating feed with a margin of safety increased formula cost by $3.40 per ton. Stochastic feed formulation increased formula cost to meet the specified CP level in feed at any probability of success, and formula cost was reduced substantially with the 2-bin method (up to $6.47 per ton). The magnitude of savings and reduced feed variability suggested that, regardless of the costs associated with building extra bins, the 2-bin method can be economically efficient in the long run. Therefore, it could be possible to split the batches of feed ingredients at a feed mill into above- or below-average bins before feed formulation to reduce CP variability and to maximize savings.     

High night-time temperature during flowering and pod filling affects flower opening,yield and seed fatty acid composition in canola

Winter canola (Brassica napus L.) is highly sensitive to increasing temperatures during the reproductive and pod-filling stages. Although the impact of high day-time temperature stress on yield and quality has been documented in canola, similar information under high night-time temperature (HNT) stress is not available. Using six hybrids and four open-pollinated cultivars, we observed a marked shift in peak flowering towards earlier, cooler hours of the morning under HNT. Averaged across two independent experiments, the photochemical efficiency of photosystem II was significantly decreased (3%), with a significant increase in thylakoid membrane damage (13%) in the leaves of susceptible cultivars under HNT stress. Similarly, the susceptible cultivars also recorded significant reduction in biomass (34%), pod number (22%), pod weight (37%) and total seed weight (40%) per plant while the same set of agronomic traits were not affected among the tolerant cultivars. Quantitative impact of heat stress was confirmed with increased sensitivity to HNT exposure from gametogenesis until maturity resulting in a significantly higher yield loss compared to stress exposure from post-flowering till maturity. HNT significantly decreased oil concentration, but increased protein concentration and saturated fatty acid levels in seeds of the susceptible cultivars. However, HNT had no impact on the unsaturated fatty acids in both hybrids and the open-pollinated cultivars. Breeding targets based on fatty acid composition for enhancing canola seed quality may not be easily amenable due to the inconsistency documented with the compositional changes under heat stress. In summary, our findings conclude that canola hybrids are better suited to regions experiencing heat stress, compared to open-pollinated cultivars, indicating the possibility of a complete shift to hybrid canola cultivation under predicted hotter climates in the future.     

不同裂解温度的污泥生物质炭理化特性分析

研究裂解温度对污泥生物质炭基础理化性质的影响,为安全、合理、高效处置污泥提供理论依据。将干燥污泥分别在200、300、500、700℃下进行热裂解处理(SBC200、SBC300、SBC500、SBC700),获得污泥生物质炭,测定其基础理化特性。结果表明：不同温度制备的污泥生物质炭表面颗粒结构完好,孔径范围均集中在10~50 μm,其中低温生物质炭SBC200表面较光滑,最可几孔径和中值孔径最大,分别为20.1 μm和14.8 μm,高温生物质炭SBC700表面较粗糙,比表面积最大,为5.98 m²/g。随裂解温度的提高,污泥生物质炭的产率、含水量、电导率、挥发分、阳离子交换量显著下降,全碳、氧、全氮、氢含量、有效磷和铵态氮均逐渐降低,pH和灰分含量显著增加。将污泥制备成生物质炭,是安全处置污泥的有效途径,低温制得的污泥生物质炭具有更大的提高土壤肥力的潜力,而高温制得的生物质炭在改良土壤酸性的应用上具有更大的潜力。     

Regional distribution of wheat yield and chemical fertilizer requirements in China

Quantification of currently attainable yield and fertilizer requirements can provide detailed information for assessing the food supply capacity and offer data support for agricultural decision-making. Datasets from a total of 5 408 field experiments were collected from 2000 to 2015 across the major wheat production regions in China to analyze the spatial distribution of wheat yield, the soil nutrient supply capacity(represented by relative yield, defined as the ratio of the yield under the omission of one of nitrogen(N), phosphorus(P) and potassium(K) to the yield under the full NPK fertilizer application), and N, P and K fertilizer requirements by combining the kriging interpolation method with the Nutrient Expert Decision Support System for Wheat. The results indicated that the average attainable yield was 6.4 t ha~(-1), with a coefficient of variation(CV) of 24.9% across all sites. The yields in North-central China(NCC) and the northern part of the Middle and Lower reaches of the Yangtze River(MLYR) were generally higher than 7 t ha~(-1), whereas the yields in Southwest China(SWC), Northeast China(NEC), and the eastern part of Northwest China(NWC) were usually less than 6 t ha~(-1). The precentage of area having a relative yield above 0.70, 0.85, and 0.85 for N, P, and K fertilizers accounted for 52.3, 74.7, and 95.9%, respectively. Variation existed in N, P, and K fertilizer requirements, with a CV of 24.8, 23.9, and 29.9%, respectively, across all sites. More fertilizer was needed in NCC and the northern part of the MLYR than in other regions. The average fertilizer requirement was 162, 72, and 57 kg ha~(-1) for N, P_2O_5, and K_2O fertilizers, respectively, across all sites. The incorporation of the spatial variation of attainable yield and fertilizer requirements into wheat production practices would benefit sustainable wheat production and environmental safety.     

木棉雄蕊特征与其繁殖策略的关系分析

采用野外观察和实验室检测方法,对云南省个旧市冷墩村的木棉花部结构、雄蕊特征、花粉活性进行研究。结果表明,自然种群中花部形态特征具有一定变异性,3层雄蕊变异系数大小关系显著。在湿度为60%、温度为35℃时花粉活性最强。研究发现,木棉雄蕊长短变化可能有利于不同传粉生物传粉效率提高和增强适应性;木棉高层雄蕊花药个体大、花粉数量多、活性高,适应干热河谷传粉繁殖条件;温度较低时,底层花药花粉活力相对较高,可为逆境环境下木棉高层花药受损后提供后备花粉源。文章就木棉花部形态与繁殖关系、木棉形态及花粉活力对繁殖的影响进行讨论。     

高温闷棚技术在大棚辣椒连作生产上的应用

为研究大棚辣椒土传病害绿色防控技术,选择不同的高温闷棚杀菌方法,以本地传统的高温炕地杀菌方法为对照,调查不同处理对地温和土壤pH值的影响,调查不同处理大棚辣椒的根结线虫、疫病、枯萎病、青枯病和根腐病的发生为害情况,测量大棚辣椒产量。结果表明,应用石灰氮、覆盖地膜和大棚膜进行高温闷棚对大棚辣椒土传病害有较好的防治效果。