Molecular Cloning of a Cellulose Synthase Gene PtoCesA1 from Populus tomentosa and Its Genetic Transformation in Tobacco

A 3 125 bp cellulose synthase gene, PtoCesA1, which has a 98% identity to PtrCesA1 from Populus tremuloides, was cloned from cDNA prepared from secondary xylem of P tomentosa. Four anti-expression vectors with different fragments of PtoCesAl, named as pBIPF, pBICC1, pBIPR and pBIBR, were constructed. Some traits of transformed tobacco of pBICC1, pBIPR and pBIBR differed from wild types, such as small leaves, ＂dwarf＂ phenotype and thinner xylem and fiber cell walls than wild plants consistent with a loss of cellulose. It indicated that the growth of transgenic tobacco was restrained by the expression of anti-PtoCesA1. Transgenic tobacco was obtained and the contents of cellulose and lignin were analyzed as well as the width and length of fiber cells, and xylem thickness for both transgenic and control plants. Transformed tobacco showed a different phenotype from control plants and it implied that PtoCesA1 was essential for the cellulose biosynthesis in poplar stems.     

三倍体毛白杨低硬度NaOH-AQ浆全无氯漂白的研究

通过实验探讨了三倍体毛白杨低硬度NaOH-AQ浆（卡伯值13．5，粘度851mL／g。白度37％，ISO）H2O2强化氧脱木质素（QOP）的工艺务件，在此基础上提出了QOP、QP全无氯漂白的漂序，此漂序可以把该纸浆漂至82．0％（ISO），粘度保持在716mL／g，漂后纸浆得率91．78％，而且该漂序可操作性强，是一种适合低硬度NaOH-AQ浆的全无氯漂白新工艺。     

白腐菌糙皮侧尔漆酶性质及其对蒽醌染料脱色性能的研究

白腐菌糙皮侧尔(Pleurotus ostreatus strain 3.42)分泌胞外漆酶，但未发现分泌木质素过氧化物酶(LiP)和锰过氧化物酶(MnP)、每升反应液以0．5mmol 2，2′-连氮-二(3-乙基苯并噻唑-6-磺酸)(ABTS)和0．1mmol的Cu^2 为诱导剂可明显提高漆酶酶活，酶活分别可达1000和800U／mL。与其它真菌漆酶相比，该酶最适反应pH值为3．5，在pH值4．0～6．0之间酶活性稳定；最适反应温度为65℃，在醋酸缓冲液(pH值5．0)中，反应温度低于50℃时，漆酶非常稳定；该酶对对-甲氧基酚的氧化速度要快于邻-甲氧基酚。叠氮化钠对该漆酶有强烈的抑制作用。蒽醌染料活性艳蓝KN-R(RBBR)可被该漆酶(30U／mL)直接脱色，12h脱色率为70％；添加小分子的介体物质ABTS(5μmol／L)，可使染料完全脱色。     

马尾松硫酸盐浆两段氧脱木质素最佳工艺条件的研究

研究了马尾松硫酸浆两段氧脱木质素的最佳工艺条件。结果表明，第一段氧脱木质素的条件为：氧压0．6MPa，温度100℃，时间80min,NaOH 量5％，MgSO4用量0．5％，浆浓10％；第二段氧脱木质素的条件为：氧压0．4MPa，温度90℃，时间60min，NaOH用量3％，MgSO4用量0．5％，浆浓10％。在此条件下，OIOⅡ木质素脱除率达到72．5％，粘度775．2cm^3/g,得率90．5％。经过氧脱木质素后浆的裂断长5．8km，耐破指数5．3kPa.m^2/g，撕裂指数12．7mN.m^2/g。     

Contributions of Extractives and Lignin to the Fractal Geometry of Internal Wood Surfaces

Internal wood surfaces can be treated as fractals, which are between Euclidean geometry and complete randomness. The fractal dimension Dfs is very informative in investigating the roughness of the internal surfaces of wood. In this study, the water sorption isotherms, including adsorption and desorption isotherm, of untreated, benzene-alcohol extracted and delignified (after benzene-alcohol extracted) spruce (Cuninghamia lanceolata) were measured at 30℃. On the basis of these isotherms, the Dfs values were calculated by FHH equation, which is based on multimolecular sorption. The results showed that both groups of Dfs values (respectively calculated from adsorption and desorption isotherms) of untreated, benzene-alcohol extracted and delignified wood have same order, that is, untreated > benzene-alcohol extracted - delignified. Therefore, the conclusion can be made that the benzene-alcohol extractives have significant contribution to the fractal geometry of internal wood surfaces. Lignin also has influ     

木质素合成酶基因F5H的RT-PCR引物筛选

据EMBL核酸序列库中发表的白杨杂种F5H的cDNA序列,利用Primer 5.0软件设计3组扩增引物。通过PCR及RT-PCR扩增反应,筛选出一组比较合适的引物,确定该引物对的最适反应体系和程序参数。利用该引物对,从正在分化的2年生欧美杨107茎的次生木质部提取的mRNA中RT-PCR扩增出一个867bp的木质素合成特异表达的f5h基因片段。将其克隆到pGM-T载体上,构建了f5h在大肠杆菌中的表达载体,并对引物筛选进行讨论。     

木质素亲水改性研究

为提高木质素的功能性,利用2-溴代异丁酰溴改性木质素制备木质素基引发剂,然后采用原子转移自由基聚合(ATRP)法将亲水单体甲基丙烯酸羟乙酯(HEMA)、乙酸乙烯酯(VAC)和丙烯酸(AA)分别接枝到木质素上,合成亲水性木质素基接枝共聚物。对接枝聚合物进行接触角测试和红外光谱分析,结果表明:接枝单体甲基丙烯酸羟乙酯时,木质素接枝聚合物亲水效果最佳;木质素接枝前后接触角分别为45°、21.6°,接枝后木质素亲水性能提高。红外光谱分析显示,木质素接枝甲基丙烯酸羟乙酯(Lignin-g-PHEMA)共聚物中具有HEMA的特征峰,表明单体甲基丙烯酸羟乙酯成功接枝到木质素分子上。     

木质素-LDPE扭矩流变性能试验研究

研究了影响木质素与低密度聚乙烯(LDPE)共混物在转矩流变仪中的共混最大扭矩、平衡扭矩以及达到平衡扭矩时间的各个因素。结果表明,木质素、淀粉降解母料、增塑剂、温度对扭矩有明显影响;在LDPE为100份时,木质素55份,淀粉母料25份,增塑剂占木质素7.5%,增容剂10.5份,温度为180℃,共混物塑化性能最优。     

木质素电氧化的影响因素研究

木质素是天然高分子聚合物，具有一定的化学反应惰性。本文率先研究草类木质素在膜助电解时的电化学氧化作用。其结果表明：膜助电解对黑液中的有机物具有一定的氧化作用，能使木质素中的芳环被氧化而打开；同时木质素的氧化作用与施加的电压、阳极的电极材料等因素有关。通过对木质素氧化产物结构的进一步研究，可为木质素的电化学改性提供了新的方法。     

3种白腐菌木质素降解酶的比较

对3种白腐菌——黄孢原毛平革菌、变色栓菌和木质层孔菌在恒温振荡培养条件下产漆酶、锰过氧化物酶的情况进行比较研究,同时还对此3种菌在培养过程中还原糖的变化作了研究.结果表明:3种白腐菌中变色栓菌产漆酶相对最高,其漆酶酶活最高达到136.5 U/L,产酶最高时间为第8天;而木质层孔菌产锰过氧化物酶相对最高,其最高酶活达到880.2 U/L,产酶最高时间为第8天;同时在培养过程中还原糖含量随培养时间的延长而逐渐降低.