蒸发浓缩－CODcr法测定地面水中低浓度COD

对水样蒸发浓缩法用于地面水中低浓度ＣＯＤ的测定进行探讨的实验结果表明，地面水中低浓度ＣＯＤ物质可以在碱性条件下，通过蒸发浓缩处理后，采用重铬酸钾法进行测定，所得结果的精密度和准确度良好．若选择水样浓缩系数为５，则可将重铬酸钾法的最低检测限浓度降低到１０ｍｇ·Ｌ－１，从而使该方法能够适用于地面水水质标准中各类水质ＣＯＤ的监测要求．     

Relating Kirtland's warbler population to changing landscape composition and structure

The population of male Kirtland's warbler (Dendroica kirtlandii) in the breeding season has averaged 206 from 1971 to 1987. The Kirtland's warbler occupies dense jack pine (Pinus banksiana) barrens from 5 to 23 years old and from 1.4 to 5.0 m high, formerly of wildfire origin. In 1984, 73% of the males censused were found in habitat naturally regenerated from wildfire or prescribed burning. The rest were in plantations (11%) or in harvested, unburned jack pine stands stocked by natural regeneration (16%). Twenty-two percent (630 of 2,886) of the Kirtland's warbler males counted in the annual censuses from 1971 through 1984 were found in 26 stands that were unburned and naturally regenerated following harvest. From 1982 to 1987, suitable regenerating areas were barely sufficient to replace currently occupied maturing stands, so population growth was impeded. Ecosystems of suitable size and regeneration characteristics (wildfire and plantation) doubled in area by 1989. In response, the population of Kirtland's warblers increased from 167 to 398 males between 1987 and 1992, but they withdrew almost entirely from the unburned, unplanted barrens by 1989 when the area of more suitable regeneration types increased. Minimum (368 males) and maximum (542 males) population estimates for 1996 were calculated based on 1984 average density (1.9 males per 40 ha) and peak population in burns (2.8 males per 40 ha).     

非平行直纹面的电解磨削

为解决整体叶轮扭曲叶片型面的精加工难题,本文进行了五轴联动数控展成电解磨削的基础研究.在分析平行直纹展成电解磨削整体叶轮扭曲叶片的过切误差、得到过切误差计算公式的基础上,提出用圆锥磨轮和组合式五轴联动数控方案来消除过切误差的方法.文中还介绍了数控展成电解磨床的结构与运动、经济型多轴数控系统及其联动控制方法,并建立了电解磨削非平行直纹展成曲面的数学模型,开发了五轴联动数控展成电解磨削自动数控编程系统,对航空发动机整体叶轮的叶片型面进行电解磨削.结果表明,加工效率比手工修磨、抛光提高了12倍以上.     

纤维板表面粉末涂料的涂饰工艺

研究一种在纤维板表面进行粉末涂装再转移印花的新工艺.结果表明:纤维板粉末涂装基材预处理采用预热干燥,表面砂光,控制含水率为6%～8%;喷涂上粉量为333.33～388.89 g·m-2;固化条件为180 ℃,15～25 min.采用干燥箱中热转移方式,转移印花温度为(160±10)℃,时间15～20 min.按GB/T 4893-85和GB/T1733-79测试涂膜性能,涂膜附着力等级为2级,耐磨性等级为1级,耐水性合格,耐液性等级为1级.图1表4参9     

1QJ-120型浅松机的研究设计

针对旧式浅松机表土作业中秸秆和土壤侧向位移问题,分析和优化了浅松机的技术参数,设计了一种新型的1QJ-120型浅松机。该机适用于旱作保护性耕作播前作业,能够达到除草、整地和提高地温等目的,也可以用于中耕除草作业。     

STUDY ON THE EFFECT OF CLIMATE CHANGE ON FOREST FIRE IN HEILONGJIANG PROVINCE

GENERALCoNDlTloNABoUTCLI-MATECHANGEINHElLoNGJIANGPRoVINCEDtlrlngthepasscdll)()}ears(l88l-l`)8(j)ors().tllctcndenc}'ofmcanairtc111pcraturcincrcasct\ithfluctuationcl11ergcdin\ariousrcglonsofHcllonViangproxincc.Airtcmpcra-turcinl98()s-rcachcdtl1emaxil11un1uithinthcpasscdll)()y'cars.Thisphcl1ol11enonaccordcd``iththctcndenc}'ofglobalclil11ate\"ar1ni11g.Thel11eanairtc111peralurcil1tl1creccl1tl()}car(l()8()-l()8`))incrcascdb}l).6"Cascom-pal-cd\`ltl1tl1atll1tl1clbrl11er3())'carsacc…     

氧漂期间桦木硫酸盐纸浆表面性质变化的探讨

尝试性地应用ESCA对桦木硫酸盐浆氧漂期间表面性质的变化进行了初步分析。结果表明:桦木硫酸盐浆氧漂期间氧碳比逐渐增加,碳价态发生了显著的变化。这对于指导纸浆氧漂工艺条件的合理制定,预测或控制纸浆的宏观质量有非常重要作用。ESCA可为研究纸浆漂白提供新的有效手段。     

植物叶面铺展剂的复配规律Ⅰ.SDS和TX100混合水溶液体相及表面层相互作用行为

2种典型固体表面铺展剂SDS和TX100混合水溶液,无论在其表面层或在混合胶团中两组分之间均存在一定程度的相互作用,使得以廉价的SDS为主的溶液中加入少许TX100组成的复配体系表面活性提高,在植物叶面上的润湿性能改善,并从理论上计算了其相互作用参数,初步解释了实验现象,上述结果不仅对指导优良植物叶面铺展剂配方具有指导意义,也预示了潜在的实用价值.     

高校图书馆消防安全系统的新木桶模型

从历次惨痛的图书馆火灾事故中,探究图书馆火灾发生的原因。在此基础上,引入新木桶理论,探索建立适合图书馆消防安全的安全木桶模型,从安全系统的人、物、环境这3个安全指标,人力、技术、财力的保障,安全管理和安全责任几个方面讨论了安全木桶的适用性,并针对所在图书馆的安全系统提出了相应的建议。