Addition of structural complexity – contrasting effect on juvenile brown trout in a natural stream

In a field experiment, we examined the effects of structural complexity in the form of added artificial plastic plants and shredded plastic bags on growth and abundance of juvenile brown trout (Salmo trutta). Just after emergence, the added complexity had a positive effect on the density, biomass and condition factor of young‐of‐the‐year (0+) brown trout. This difference in density was not present six weeks later. In contrast, both young‐of‐the‐year and older brown trout generally tended to be larger in the simple habitat. Hence, our data suggest that increased complexity initially is beneficial for young‐of‐the‐year individuals probably due to lower risk of predation and increased densities of prey. However, as density increases in the complex environment, it may induce negative density‐dependent effects, here reflected in smaller sized fish in the complex environment. This might force fish to redistribute to habitats with lower densities of conspecifics as they grow larger. We propose that habitat complexity can increase survival of yearlings in early phases and thereby also affect the overall population structure of brown trout in natural streams.     

闽西清香型烤烟配套栽培技术研究

为了规范烤烟栽培模式,对清香型烤烟配套栽培技术进行了试验研究,提出了适时播栽、培育壮苗、精耕细作、盖膜待栽、控制施氮、合理追肥、"膜上"栽烟、科学管水、掀(揭)膜培土、病虫防治、拔节打顶、成熟采烤等配套栽培技术。     

不同种源/家系的细叶桉苗期叶脉密度比较

本文以3个种源、14个家系的细叶桉苗木为试验材料，研究了其种源、家系叶脉密度的差异以及各级叶脉密度之间的相关性。结果表明：种源间总叶脉密度和次级叶脉密度的差异极显著，2°主叶脉密度差异不显著，次级叶脉密度与总叶脉密度的比值在88.07%以上；种源地 China Dongmen 家系间的总叶脉密度、次级叶脉密度、2°主叶脉密度之间差异极显著，2°主叶脉密度与次级叶脉密度和总叶脉密度呈极显著负相关，次级叶脉密度与总叶脉密度呈极显著正相关；其他种源内家系间叶脉密度的差异较小。     

SoilFlex‐LLWR: linking a soil compaction model with the least limiting water range concept

Soil compaction impacts growing conditions for plants: it increases the mechanical resistance to root growth and modifies the soil pore system and consequently the supply of water and oxygen to the roots. The least limiting water range (LLWR) defines a range of soil water contents within which root growth is minimally limited with regard to water supply, aeration and penetration resistance. The LLWR is a function of soil bulk density (BD), and hence directly affected by soil compaction. In this paper, we present a new model, ‘SoilFlex‐LLWR’, which combines a soil compaction model with the LLWR concept. We simulated the changes in LLWR due to wheeling with a self‐propelled forage harvester on a Swiss clay loam soil (Gleyic Cambisol) using the new SoilFlex‐LLWR model, and compared measurements of the LLWR components as a function of BD with model estimations. SoilFlex‐LLWR allows for predictions of changes in LLWR due to compaction caused by agricultural field traffic and therefore provides a quantitative link between impact of soil loading and soil physical conditions for root growth.     

Responses of soil nematode community structure to soil carbon changes due to different tillage and cover crop management practices over a nine-year period in Kanto,Japan

The response of the soil food web structure to soil quality changes during long-term anthropogenic disturbance due to farming practices has not been well studied. We evaluated the effects of three tillage systems: moldboard plow/rotary harrow (MP), rotary cultivator (RC), and no-tillage (NT), three winter cover-crop types (fallow, FL; rye, RY; and hairy vetch, HV), and two nitrogen fertilization rates (0 and 100 kg N ha⁻¹ for upland rice, and 0 and 20 kg N ha⁻¹ for soybean production) on changes in nematode community structure. Sixty-nine taxa were counted, total nematode abundance (ALL), bacterial feeders (BAC), predators (PRD), omnivores (OMN), and obligatory root feeders (ORF) were more abundant in NT than in MP and RC, but fungal feeders and facultative root feeders (FFR) were more abundant in RC than in NT and MP. Cover crop also influenced nematode community structure; rye and hairy vetch were always higher in ALL, BAC, FFR, ORF, and OMN than fallow. Seasonal changes in nematode community structure were also significant; in particular, as soil carbon increased, nematode abundance also increased. The relationship between nematode indices and soil carbon was significant only in NT, but not in MP and RC. In NT, with increasing soil carbon, enrichment index and structure index (SI) were positive and significant and channel index was negative. Bulk density was significantly negatively correlated with FFR and ORF. Seasonal difference in nematode community between summer and autumn was larger in an upland rice rotation than in a soybean rotation. Over the nine-year experiment, SI increased not only in NT but also in MP and RC, suggesting that repeated similar tillage inversions in agroecosystems may develop nematode community structures adapted to specific soil environmental conditions. Because NT showed the highest values of both SI and soil carbon, the increase of soil carbon in NT is expected to have a great impact on developing a more diverse nematode community structure.     

Assessing the deposition and canopy penetration of nozzles with different spray qualities in an oat (Avena sativa L.) canopy

Consistent spray coverage that is evenly distributed throughout the canopy is necessary to control pest populations that can negatively affect yield. As applicators are switching to Coarser spray quality nozzles to reduce risk and liability of pesticide spray drift, concerns about efficacy loss are growing. Previous research has indicated that small droplets are the most effective at penetrating through crop canopies, but newer nozzle technologies have improved the effectiveness of larger droplet or Coarser sprays. Research was conducted to assess the canopy penetration of nozzles that produce Coarse, Very-Coarse and Extremely-Coarse spray qualities compared to nozzles that produce Fine and Medium spray qualities. Kromekote collectors were positioned in four configurations in an oat (Avena sativa L.) var. ‘Yarran’ (AusWest Seeds, Forbes, NSW, Australia) crop to quantify the coverage and droplet number densities (droplets cm⁻²) across three application carrier volume rates: 50, 75 and 100 L ha⁻¹. Applications were made in the field in 30 cm tall, tillering oats, with collectors arranged in a randomised complete block design with three replications. The entire study was repeated on the following day. Results showed that droplet number densities were inversely related to the droplet size produced by the nozzles, yet coverage was increased more by application volume rate than droplet size. Thus, both spray drift reduction and improved canopy penetration can be achieved with proper nozzle selection and operation parameters for the control of agronomic pests.     

Critical comparison of the vanadomolybdate and the molybdenum blue methods for the analysis of phosphate in plant sap

Abstract

The performance of the vanodomolybdate and molybdenum blue methods for the routine determination of phosphate in plant sap were compared in order to assess their suitability for the detection of P deficiency at an early stage of plant growth. The molybdenum blue method was ca 10 times more sensitive than the vanadomolybdate one and required less sap to give a successful test. Recoveries of phosphate added to both sap and solution samples were close to 100% with both methods. The methods were in good agreement over a wide range of phosphate concentrations using sap samples from all leaves during the early stages of P deficiency, but increases in sap background colour caused the vanadomolybdate method to overestimate phosphate concentrations as the deficiency became more acute. Measurements on solutions of similar absorbance showed that the vanadomolybdate method was not significantly more variable than the molybdenum blue method but tended to overestimate phosphate concentration when very small volumes of sap were available. It was concluded that the molybdenum blue method was the most reliable for routine measurements of phosphate in plant sap.     

The Standardization of an Apparatus for the Mixing of Soil Samples for Nematode Extractions

Quantitative determination of nematode populations in soils frequently necessitates the mixing of representative soil samples to form a homogeneous, compound sample from which the nematodes are extracted. A mixing apparatus was developed and standardized with the aid of a spectrophotometric technique by which the dispersion of a dye through the soil during mixing could be determined. It was found that the mixer is most suitable for use on sandy loam soils. Optimal mixing is obtained at a speed of 15 rpm for 2 minutes. Under these conditions mechanical damage to nematodes during mixing is minimal.     

Sperm production and quality in European eel (Anguilla anguilla) in relation to hormonal treatment

Aquaculture production relies on controlled management of gametogenesis, especially in species where assisted reproduction is needed for obtaining gametes in captivity. The present study used human chorionic gonadotropin (hCG) treatments to induce and sustain spermatogenesis in European eel (Anguilla anguilla). The aim was to evaluate effects of strip-spawning timing (12 vs. 24 hr) after weekly administration of hCG and the necessity of a primer dose (in addition to weekly hormonal treatment) prior to strip spawning (primer vs. no-primer) on sperm quality parameters. Sperm parameters included milt production (weight), density and sperm kinematics at Week 9, 11 and 13 after onset of treatment. Spermiation commenced in 11.5% of males in Week 5 and by Week 9, and all males produced milt. Male weight, milt production, sperm density and spermatocrit did not differ among hormonal treatments during the experimental period. Overall, male weight decreased from 106.3 to 93.0 g, milt weight increased from 3.5 to 5.4 g, sperm density counts decreased from 11.7 × 10⁹ to 10.5 × 10⁹ cells/ml, and spermatocrit decreased from 46.5% to 40.5%. Furthermore, spermatocrit was positively related to haemocytometer counts (R² = .86, p < .001), providing a reliable indicator of sperm density. Differences in sperm kinematics were observed depending on strip-spawning timing after hormonal injection (12 vs. 24 hr) but with no consistent pattern. These sperm quality parameters also did not consistently differ between the no-primer and primer treatments. Considering that each male may be stripped 4–5 times over the 2–3 months spawning season, omitting the primer would reduce animal handling, material costs and labour intensity, while sustaining high-quality sperm production.