豆油乙二醇乙醚酯生物柴油燃料特性研究

以乙二醇乙醚和精制大豆油在金属钠催化下合成出了豆油乙二醇乙醚酯生物柴油,考察了该生物柴油作为替代燃料在性能方面与柴油的差别;研究了作为柴油添加剂,其加入量对混合燃料性能的影响。结果表明,豆油乙二醇乙醚酯生物柴油的燃料特性达到了国外生物柴油生产标准,可以直接作为柴油使用,也可与矿物柴油掺合使用,提高了柴油的使用性能。     

柴油机电控高压共轨喷油系统的应用

燃油喷射系统作为柴油机的“心脏”,其性能好坏直接影响柴油机的性能和工作可靠性。随着人们对柴油机智能化、强度化、经济性和排放性的要求越来越高,燃油喷射系统的研究也越来越受到重视。未来柴油机必须满足更严格的排放法规,而高压共轨系统具有高度的控制灵活性,其已成为降低柴油机排放的主要核心技术之一。为此,介绍了这种喷油系统的构成、工作原理、特点和现状。     

单缸柴油机双喷油器燃烧系统

对单缸柴油机双喷油器直喷燃烧系统进行了研究，分析了供油系统油管分叉夹角及截面收缩比、燃烧室油线布置及几何形状的优化原则。采用该燃烧系统，可增加燃油喷注在燃烧室内的自由贯穿长度，减少对进气涡流的依赖，促进混合气形成和燃烧；可降低气缸盖及活塞的热负荷；由于进、排气门中心线与气缸中心线处于同一平面，故气门流通面积大，可以改善进排气流动性能；可实现先缓后急的喷油规律。     

电控喷油对降低双燃料内燃机烟度排放的试验研究

介绍了电控LPG-柴油双燃料内燃机供给系统的设计,柴油分别采用机械泵和电磁铁执行器供给,LPG采用电控顺序喷射方式供给。同时对控制系统进行了硬件和软件设计,对软件的功能进行详细的说明,最后对双燃料内燃机进行标定试验,论证了柴油的电控喷射对降低烟度排放的影响。     

柴油机三大精密偶件密封性对供油特性的影响

柴油机喷油泵的柱塞、出油阀和针阀这三大精密偶件的磨损程度直接影响到柴油机的供油规律和各种综合性能。为此,采用二次回归正交设计的方法,通过大量的试验数据,建立了精密偶件的磨损量与供油量之间的定量关系式,从而更直观、清楚地了解到三大精密偶件的密封性对供油量影响程度的主次关系。     

Establishment of trees on mixtures of pulverized fuel ash and Gypsum. Part II: Nutrition and trace elements

Nutrients and trace elements were determined in the foliage of nine tree species grown in mixtures of pulverized fuel ash (PFA) and gypsum. No serious macronutrient deficiencies were observed. Treatments with PFA consistently increased foliar levels of boron, potassium and molybdenum, and the poor performance of some tree species in pure PFA was attributed to boron toxicity. Gypsum hindered the uptake of boron when mixed with PFA, however, and co-disposal of the two wastes could be used to minimize problems associated with boron toxicity.     

饲粮中糙米替代玉米的比例对饲料制粒性能的影响

为考察糙米替代玉米对饲料制粒性能的影响,按糙米替代比例设计6种饲粮进行饲料制粒参数测定,6种饲粮分别为Ⅰ型(玉米100%)、Ⅱ型(玉米75% 糙米25%)、Ⅲ型(玉米50% 糙米50%)、Ⅳ型(玉米25% 糙米75%)、Ⅴ型(糙米100% 2%植物油)和Ⅵ型(糙米100% 3%植物油).结果表明,饲粮中添加一定比例的糙米来替代玉米,有利于改善饲料制粒性能,饲粮中随糙米添加比例的增加,制粒机的生产率与颗粒饲料的硬度显著提高,水稳定性明显增强,粉化率显著降低,但密度、体积质量无显著影响.适宜的替代比例为75%.     

燃料乙醇发酵技术研究进展

世界能源安全正面临挑战.清洁的可再生能源生物质燃料乙醇的发展越来越被重视.从生产原料、酶与微生物、技术和工艺等方面,概述了燃料乙醇发酵技术的研究进展,并展望了今后的研究方向.     

0#柴油和原油的水溶性成分对小球藻(Chlorella vulgaris)生长的影响

采用室内培养方法,研究了不同浓度0#柴油和原油的水溶性成分(Water accommodated fraction,WAF)对小球藻(Chlorella vulgaris)的生长影响及其差异.结果显示,低浓度的0#柴油WAF(0.30、0.10 mg/L)和原油WAF(1.17、0.58 mg/L)能够促进小球藻的生长,且0#柴油WAF的0.10 mg/L实验组和原油WAF的0.58 mg/L实验组在96h时,小球藻细胞密度显著高于对照组(P＜0.05);而高浓度的0#柴油WAF(8.10、2.70、0.90 mg/L)和原油WAF(9.36、4.68、2.34 mg/L)会抑制小球藻的生长.0#柴油和原油WAF对小球藻的96 h-EC50分别为3.34、6.54 mg/L,NOEC分别为0.30、1.71 mg/L,LOEC分别为0.90、2.34 mg/L.0#柴油WAF的毒性高于原油WAF,0#柴油和原油水溶性成分的组分差异是影响二者毒性强弱的主要因素.     

Effect of extrusion cooking temperature on the microstructure of extruded pellets

ABSTRACT:   The microstructure of extruded pellets (EP) for fish under various extrusion cooking temperatures was studied by using a twin-shaft extruder. As the extrusion cooking temperature increased, the expansion rate increased and the bulk density of EP decreased. The liquefaction of the material started because of the increase in inner material temperature, the decrease in inner material pressure, and the decrease in main motor amperage. Thus, the microstructure of EP changed depending on the extrusion cooking conditions, that is, the extrusion cooking temperature effected greatly the liquefaction of the material. Generally, when the extrusion cooking temperature increased, the expansion rate increased, but a suitable temperature was found for a maximum expansion rate. The microstructure of the EP was caused by the liquefaction of the material and the microstructure effects on the function of EP. For example, the water holding capacity was affected by the inner bubble structure of an EP. These functions affect the character of the feed. EP produced under suitable conditions can have additional functions for feed.