欧式木窗专用推台铣主轴动平衡方法研究

介绍了普及型欧式木窗专用推台铣床的作用及其特性，阐述了欧式木窗推台铣床主轴的平衡理论基础．指出了该机械系统的动平衡方法，并通过试验做出了分析。     

浅谈建筑外窗部位渗漏原因及防治方法

简述分析了建筑物外窗的渗漏原因,并阐明了几项质量控制措施.     

空间机构连杆的运动分析

建立了空间连杆机构的分析模型,利用矢量回转法确定了空间机构连杆上沿任一直线作匀速运动的动点轨迹矢量方程,即动点轨迹方程,并进一步地对矢量方程进行微分求出动点在任一瞬时时刻的速度和加速度;建立了空问机构连杆上任一直线的轨迹曲面方程,即连杆曲面方程;再应用MATLAB函数绘制了空间机构连杆上任一直线上动点的轨迹曲线、速度和加速度图以及连杆曲面图,为空间机构研究和机器人设计提供了理论基础.     

基于改进多父辈遗传算法的农机调度优化方法

农机装备跨区作业存在作业任务重、转移范围大、作业时效性强等问题,传统的农机调度缺乏科学合理的调配方案。该研究开展了基于改进遗传算法的多机协同作业任务调度方法研究。首先对多块农田需连续进行多种生产任务的问题进行分析,建立在农机数量、转移距离、作业准备时间及作业时间等约束条件下的时间窗农机作业调度模型;然后以最小化作业时间为优化目标,提出改进多父辈遗传算法（Improved Multi-parent Genetic Algorithm, IMPGA）的优化方法求解农机作业规划方案;最后根据新疆塔城地区的农田数据及随机生成的农田任务进行模拟与仿真,并与标准遗传算法（Genetic Algorithm, GA）进行对比。结果表明：IMPGA和GA均能有效解决多任务多农机作业分配问题,IMPGA算法总体上优于GA,调度的最优时间和平均时间分别缩短2.47%和2.70%。该研究可为农机跨区作业提供合理的调度方案,也为规模化无人农场的生产经营提供科学依据。     

浅谈地下车站侧墙大块定型移动模架施工技术

随着城市地铁的飞速发展,地铁车站在条件满足的情况下大都采用明挖法施工。在施工主体侧墙时采用满堂红支架法施工,但因施工时工期较长且易存在一些质量通病,因此,近年来大块定型移动模架被得到了广泛的应用。     

关于藏书倒架的研究与探讨——以中国矿业大学图书馆文昌科技图书阅览室为例

结合工作实际探讨藏书倒架的前期准备工作及倒架时的路线设计、人员组织安排和倒架后的环节完善。以期减轻图书馆人员在倒架工作中的劳动强度和工作量，提高工作效率。     

Study on the Land Use Right in Urban Housing Dismantling and Moving

With the strengthening of constitutional protection that legal private property is not to be encroached upon and the land usufructs paid regime are further clear, the regime of urban housing dismantling and moving is facing a vigorous test. This paper analyzes three problems: the justice of the withdrawal of land use right, the legality of the alteration of the land use right and the rationality of the compensation of the land use right during the urban housing dismantling and moving. Finally, this paper tries to find some effective measures to solve the chain problems.     

A New Method for Parameterized Design of Metallic Doors and Windows

According to the graphics characteristics of metallic doors & windows design and based on the research of graphics dimension restriction problems. This paper provides a new method for parameterized design of metallic doors & windows in virtue of expression solution. In this method, the restrictions of graphic elements have been changed into the parameter expressions of sizes and positions of graphic elements. Through the calculation of such expressions, the parameter driven method has been reached. Thus the parameterization of graphics can be easier and quicker than before. It can be used to setup the open parameterized graphics libraries.     

土方机械落物保护结构动态仿真及试验

简述了土方机械落物保护结构的特点及性能要求,建立了落物保护结构受瞬态冲击响应的有限元结构动力学方程并提出了求解算法。以某装载机落物保护结构为例,建立了落物保护结构的非线性有限元模型,讨论了有限元网格划分及载荷施加方法,分析了落物保护结构的主要设计参数对冲击点最大位移及落锤速度和加速度的影响,并给出了更合理的结构。在试验台上对该装载机落物保护结构进行了落物冲击试验,试验结果和仿真结果吻合较好。落物保护结构的动态仿真为结构的设计提供了依据。     

Analysis of green total factor productivity trend and its determinants for the countries along silk roads

In coping with increasing energy consumption and the consequential environmental pollution, green development is becoming an important part of social development. Since the inauguration of China’s Silk Road Economic Belt Initiative (BRI), economic cooperation between China and other countries along BRI has seen much growth. Therefore, it is of great significance to study the levels of green total factor productivity (GTFP) of the countries in the Silk Roads Economic Belt (B&R) and examine how these levels vary spatially and evolve temporally. In this paper, a panel regression analysis with DEA windows is used to study the spatiotemporal trends of the levels of GTFP. The results are: (1) The B&R countries have seen an increase in their overall levels of GTFP over time; (2) There are regional differences in the levels of GTFP, with higher efficiency in Western Asia and Central and Eastern Europe, and lower efficiency in Southeast and Central Asia; (3) The analysis of GTFP for countries in these regions shows that the efficiencies of most countries have been improving, with that of only a few countries have been decreasing; (4) By using regression analysis, we find that variables such as import, export, industrial structure, and urban affect the B&R countries with growing GTFP.