A Kind of Directing Operation Expert Systems Based on Self-adaptive Predictor

In the general directing-operation expert systems.the information of directingoperation is often shown after the subprocess has finished,The aim of the thesis is to enhance thefunction of directing-operation,and suggest that we add the self-tuning predictor in the expertsystems and use it to direct the present operation.We have shown the case oftemperature-predicting experiment made in the small wine distillatorv so that we can illustrate thatit is feasible to use the predictor to direct the operation.     

The Monitoring Measurements and Country Rock Control of NATM in Tunnel of Express Road during Construction

In this paper the author' s study on the monitoring measurement technique of NATM,the regularity and conditions of the country rock deformation are analysed based on the site measurement data in the west section of Zhongliangshan tunnel. The regression analysis of measure data for different measure lines of vavious country rock is done by the use of self-compiled CRAP program. The stability criterion for various rockmass and optimum time for primary and permanent support are provided. The conclusion available could conduct the theoretical research of NATM deeply as well as tunnel design and construction.     

A SDUDY ON THE LOCKING PERFORMANCE OF THE SYSTEM FOR HEIGHT OF MG150-WD COAL SEAM SHEARER

In this paper, based on the automatic-control theory, the time and frequency response of the hydraulic control system for height of MG150-WD coal shearer are analysed, and the steady and dynamic locking performance tests are made. The results show that the locking performance is satisfactory.     

玉米自交系及杂交种抗青枯病鉴定

1986-1989年采用自然鉴定和人工土壤接种鉴定的方法，对602份玉米材料的青枯病抗性进行了鉴定。人工接种鉴定397份，其中204份材料表现抗病。在正常年份，人工接种鉴定效果明显好于自然鉴定，但在重病区或青枯病流行年份，在尚未具备人工接种条件时，利用自然发病作为选育抗病材料仍有一定效果。玉米苗期接种青枯病重于成株期     

促芽肥与杂交中稻再生力关系及其作用机理

１９９１－１９９３年以２个杂交中稻品种为材料，研究了促芽肥与杂交中稻再生力关系及其作用机理。结果表明，促芽肥不能提高到２、倒３节位活芽率，可提高倒４、５位活芽率。促芽肥对再生力的效果与母茎 鞘干物质重有关，当母茎鞘干物质过大或过小时，促芽肥的作用极小。     

屏蔽泵抗汽蚀性能的试验

介绍了低汽蚀屏蔽泵的结构和工作原理，分析了该种泵的性能特点以及汽蚀产生的原因等，提出了提高抗汽蚀性能所采取的措施。从改善叶轮进口几何形状的设计方法方面来降低泵的汽蚀余量，例如叶轮进口直径Dj，叶片进口安放角β1，叶片进口边的形状，叶片数，叶轮进口流道形状等。对两台屏蔽泵进行了性能试验：通过能量性能试验确定出扬程H、输入电机功率N、机组效率ηgr与流量Q之间的关系，通过汽蚀性能试验确定临界汽蚀余量△hc与流量Q之间的关系。结果表明，两种规格屏蔽泵的性能均达到了设计的要求。     

装载机动臂断裂原因分析与改进措施

论证了30装载机断裂机理，通过对动臂危险截面受力分析，在不改变工作装置各零部件铰点、保证零部件通用性的情况下，增加动臂板危险截面面积，提高动臂危险截面处安全系数，改进下料与焊接工艺，从而避免了动臂断裂。     

双环带种肥穴播器的设计

针对目前穴播机械的现状,设计了一种新型的双环带种肥穴播器,介绍了其基本结构和工作原理.从结构上分析了种肥穴播合理性,并推导出了穴播器的入土端方程.试验证明,机速在1.0m/s时,该穴播器投放种子与肥料可靠,穴粒数、穴距和播深合格率都能满足要求.鸭嘴强制后开式设计有效解决了堵土问题,播种精度较高,可广泛应用于花生、棉花、玉米与小麦等农作物的播种.     

增加投入实现引黄灌溉良性发展

引黄灌溉经济效益显著,但是灌区管理单位的财务收益却入不敷出。根据经济效益分析与水费收交情况,作者认为应加强水费回收,多方面集资以及深化水费改革等,以利于灌溉事业的良性发展。