不同熔化速率下的电渣重熔过程数值模拟分析

电渣重熔能提高钢锭的质量,从而满足特种行业的需要,其过程伴随着复杂的物理现象,存在着磁流体流动、传热和传质以及电化学等多方面的影响。通过耦合电磁以及流动和温度方程对电渣重熔过程的三维瞬态进行了数学模拟,研究了熔化速率对重熔过程的影响。结果表明：电流密度、焦耳热和电磁力都随着熔化速率的增大而增大,当熔化速率由14.4 kg/h增加到27.0kg/h,电流密度、焦耳热和电磁力最大值的增大比例超过100%。随着熔化速率的增大,温度最大值有小幅的增加,而且速度最大值的增大幅度接近50%;金属熔池深度则由27 mm增大到38 mm,不利于保证铸坯的质量。     

Current Status of DIMOX in Synthesizing Al/Al2O3 by Aluminum Alloy

The processes, microstructures, properties and mechanisms of DIMOX in synthesizing Al/Al 2O 3 by Al-Mg-Si alloy are reviewed and their problems are considered mainly as following:non_homogeneous oxidation growth of Al/Al 2O 3 at the surface of melts and the porosity of Al/Al 2O 3 limites structural application of Al/Al 2O 3 composite. The mechanisms and models of microchannel,magnesium action,silicon action,and induction are outlined. Several problems which need to be noticed are pointed out,which are diffusion and transfer of oxygen in aluminium melts;the role of MgO and MgAl 2O 4 at outer layer;the reaction feature of solid_gas in the oxidation microstructures of Al_Mg_Si alloy;SiO 2 induction mechanism of silicon and its correlation with the mechanism of magnesium action in Al_Mg_Si alloy.     

Mathematical Medel for Heat Transfer on Solididing Ladle of Hot Metal

In this paper,solidifinG ladle of hot metal has been studied from the point ofview of heat transfer.A mathematical model,which is applied to predict the shape and the thicknessof solidifing layer,has been developed. The theoretical calculated results agree with the appliedresults in preduction. The effects of various paramenters,such as the circulating times, the inner-surface temporature of ladle and the different refractories,on the shape and the thickness ofsolidifing layer have been discussed.These are contributed to reduce the solidifing ladle of hot metal.     

Finite Groups With 52 p Elements of Maximal Order

The authors discuss the finite groups with 52 p elements of maximal order,and get a theorem as follows: SupposeG is a finite group with |M(G)|=52 p elements of maximal order,where p is a prime and p>5,then G is solvable.     

Application of Water Quality Standand Leuel Method in Eualuazing Status Quo of Heauy-Metals Pollution in Riuers

The status quo of heauy-metals pollution in water phase of course of Long-Tan hydropower statian was eualuated by water Quality Standand Level Method. With this special method,mone objectiue and definite results were obtained.     

METAL MATRIX PARTICULATE COMPOSITES BY SPRAYING CODEPOSITION

The spraying codeposition process is used to produce metal matrix paniculate composites, whose technical procedure and main processing parameters are analyzed. The microstructure of the composites is examined and the properties are tested. The solidification characteristics in the spraying deposition and solidification process are discussed. The results indicate that several problems involved in conventional methods can be overcome with this technique to preduce metal matrix paniculate composites. The reinforce particles are dispersed in the matrix homogeneously without solidification segregation. Compared with the matrix alloy,the composite proves to be harder and has excellent wear resistance.     

鄂尔多斯高原北部沙区主要植被类型下土壤要素的空间分析

鄂尔多斯北部沙区存在着极为显著的风沙地貌,在此格局基础之上,特别是在植被与土壤的相互响应过程中,二者的相互关系逐渐密切,这种反馈作用使得该区域的植被与土壤要素形成的空间分布格局具有一定的耦合性。研究这种关系可以为该地区保护植被和合理利用土地资源提供科学依据。     

污水灌溉条件下作物对土壤重金属吸收特征比较

通过采样和化学测试，对污水灌溉条件下，小麦、水稻、蚕豆和油菜果实中Cu、Zn、Pb、Cr和Cd的含量及土壤中重金属本底浓度进行测定和分析。结果表明，污水灌溉对4种作物吸收土壤重金属的能力影响不显著，而不同作物种类对这种吸收能力的影响表现出显著的差异。     

板料参数对抗皱性的综合影响研究

应用多元统计分析方法进行板料参数对抗皱性的综合影响研究，得到的全回归方程能客观地反映各种参数对抗皱性的影响程度和影响方式。为分析板料在成型过程中产生的缺陷和生产具有高抗皱性的板材提供依据。