Transient heat transfer characteristics of air-array-jet impingement with different nozzle arrangements on high-temperature flat plate in small jet-to-plate distance

Numerical studies on transient heat transfer characteristics of air-array-jet impingement with a small jet-to-plate distance and a large temperature difference between nozzles and plate were presented.The dimensionless jet-to-plate distance(H/D)was 0.2,and non-dimensional nozzle-to-nozzle spacing(S/D)was 3,4,5 and 6,respectively.It is found that the quenching time is shortened at a constant total mass flow at air jet inlet m·(m·=218.21 kg/h),and the heat transfer uniformity is deterio-rated as S/D increases.However,the adding reversed-flow nozzles can shorten the quenching time of the glass plate considerably with a modest change in the heat transfer uniformity.The results at variable m·are the same as those at a fixed m·.Furthermore,the parity and arrangement of nozzles are also discussed,It is found that an odd number of nozzles is more beneficial for transient heat transfer.Based on these results,an appropriate proposal for ultra-thin glass tempering process is presented.     

深厚覆盖层上高心墙堆石坝坝顶开裂特征及原因研究

国内多座深厚覆盖层上兴建的高心墙土石坝坝顶均出现不同程度的开裂,对坝体的长期安全稳定构成威胁,受到业内广泛关注。通过地质雷达、高密度电法等物探技术确定某高心墙堆石坝顶裂缝时空分布情况,根据变形实测资料分析了其变形破坏特征,并结合工程建设情况、结构特征、运行情况等对开裂原因进行分析。结果表明坝顶裂缝产生的根本原因是土体承受的应力超过其抗拉强度或抗剪强度后而发生的破坏,直接原因为坝顶的不均匀沉降,其中水荷载、湿化变形、蓄水速度、坝顶材料特性是坝顶不均匀沉降的关键影响因素。     

徐州地区日光温室保温性能的试验研究

分析了徐州地区冬季日光温室小气候的变化规律。针对当地日光温室冬季保温性能不理想的现状，从光照条件和温度条件两方面进行分析，对温室自身造成的保温性能不理想提出了改进意见，并在现有温室结构的基础上，通过选择最佳的揭盖帘时间，来提高冬季日光温室的保温性能。揭盖帘对比试验表明，揭盖帘时间选取恰当对室内温度影响较大，可以提高温室的保温性能。     

含承压水软基真空联合堆载预压设计

首次运用真空联合堆载预压法加固含承压水地层软基,介绍了该方法在特殊地层的设计方法和现场试验项目,详细阐述了预埋式加筋挡墙和排水系统的施工工艺。本试验的成功将进一步拓展该法的应用领域,对类似地质条件下的真空联合堆载预压设计具有一定参考价值。     

Strong heritability across years and sites for pod wall proportion and specific weight in Lupinus albus and genotypic correlation with other pod and seed attributes

Thinner pod walls might contribute to increased yield potential and adaptation of lupins. Fourteen autumn‐sown genotypes of Lupinus albus L. were evaluated over 2 years at four sites in southern Chile. Pod wall proportion (PWP), pod wall specific weight (WSW) and five other pod‐related characters were measured to estimate their genetic variation, heritability across years and sites, and genotypic and phenotypic correlations among the characters. Ranges for PWP and pod WSW were 22.9−43.1% and 16.4−37.4 mg/cm², respectively. PWP in cultivated L. albus was similar to that reported in L. angustifolius; however, specific weight was substantially lower. Highly significant genotypic effects were found for both characters. Broad sense heritabilities were high for PWP (0.63) and moderate for pod WSW (0.46). These characters were significantly correlated, more so genotypically (r_g = 0.67) than phenotypically (r_ph = 0.36). Selection for low PWP should lead to lower pod wall thickness or density, both of which contribute to pod WSW. Nevertheless, selection for pod WSW could achieve further reductions, particularly if practised among low PWP materials.     

Numerical simulation of the influences of catalytic wall on methane combustion characteristics in micro combustor

In order to study the effects of different catalytic walls on combustion characteristics, the premixed catalytic combustion characteristics of methane/air in micro combustor are studied. It lays the foundation for the combustion technology of hydrocarbon fuel in micro engine. Numerical simulation of flow and catalytic combustion in micro combustor was done by using laminar finite rate and second order upwind discretization methods. The results show that when wall temperature,CH4/O2 mole ratio and methane mass flow rate change, the influence of lower catalytic wall on the methane catalytic combustion efficiency is biggest, followed by side catalytic wall, the smallest is upper catalytic wall. The methane catalytic combustion efficiency unit area of lower catalytic wall is about three times of that of upper catalytic wall. The utilization of catalyst on lower catalytic wall is maximal . Therefore, when coating catalyst, the quantity of katalyst on lower catalytic wall should be appropriate more, moderate on the side catalytic wall, as little as possible on the upper catalytic wall. The influence disciplinarian and contribution rate of different catalytic wall on methane combustion have been gained. The optimized strategy of catalyst coating was put forward and reduced the cost of catalytic combustion.     

壁蜂与蜜蜂对棉花胞质雄性不育系的传粉特性比较

为了筛选适用于棉花胞质雄性不育系授粉的蜂种,2013―2014年以蜜蜂为对照,在网室内进行壁蜂对棉花胞质雄性不育系授粉试验,观察壁蜂和蜜蜂在棉花花朵上的生物学特性,并进行田间性状的统计分析。结果表明:壁蜂的适应性较好,受天气影响较小,但温度超过35℃后访花活动明显减少;壁蜂在不育系和保持系上的单花停留时间极显著大于蜜蜂。壁蜂授粉与蜜蜂授粉,在单株结铃数、单铃籽粒数和衣分上差异极显著,单株果枝数、铃重差异显著。蜜蜂授粉较壁蜂授粉平均制种产量高,但壁蜂制种成本低。改进田间管理措施以及采用多次适时释放壁蜂的方式,壁蜂授粉将会在棉花胞质雄性不育系授粉中发挥更大作用。     

Computation Method and for Thermal Transmittance of Glass Curtain walls Appllcation

The heat conduction characteristic of glass curtain wall was investigated. Based on one dimensional steady heat conduction theory, the numerical calculation model of glass system thermal transmittance was set up by using insulating glass as an example. Based on two dimensional steady heat conduction theory and finite element method, both the thermal transfer matrix and temperature load array of 3 DOFs triangular element were derived. Then the revised formulas about the heat transfer matrix and temperature load array under the boundary conditions of constant heat flux, heat convective, radiation and coupled of them were also derived. Then the numerical calculation models of glass curtain wall frame and linear thermal transmittance were set up. The program TJCW based on the Visual C++ and ObjectARX was developed for calculating the thermal transmittance of glass curtain wall and was validated by contrast with the results calculated by thermal software LBNL. Finally, TJCW program was used to calculate and check the thermal transmittance of glass curtain wall in a practical project. The results indicate that the thermal transmittance of glass curtain wall can be calculated correctly by adopting the presented model, and the program based on this model can be used in energy conservation calculation and analysis in the actual projects.     

大同古城墙萱草应用调查与分析

调查萱草在大同古城墙周边带状绿地的应用、配植状况,记录萱草种类、种植面积、斑块形状、种植方式、应用形式,并从与萱草配植植物的种类、应用频度、观赏特征以及配植方式、群落结构等方面进行分析。调查萱草应用的斑块样地68个,斑块总面积19808 m²,萱草总面积16883 m²,其中‘大同’黄花面积最大,北黄花菜、大花萱草、‘金娃娃’和‘红运’萱草种植面积较小。萱草应用方式主要是花境栽植;种植方式有片植和丛植2种。与萱草一同种植的风景树、绿篱、草本地被植物共有58种,应用频率较高的前10位是油松、铺地柏、山杏、山桃、山楂、丁香、水蜡、丝棉木、八宝景天、三七景天。分析与萱草一同种植植物的观赏特点,观赏季节主要在春、夏、秋三季;观赏部位占比观花>观叶>观果>观干;春季观赏以红色系为主,夏季观赏以绿色系为主,秋季观赏以黄色系为主。萱草应用植物群落垂直结构有2、3、4层,最常见的是3层“乔—灌—草”结构和4层“乔—灌—矮灌—草”结构,植物层次自然丰富。萱草斑块植物多样性显示,物种丰富度、物种Simpson指数、Shannon-Wiener指数为灌木层>乔木层>草本层,Pielou均匀度指数乔木层>灌木层>草本层。建议增加萱草和常绿植物的种类和应用数量,并强化大同黄花文化品牌效应。     

Influence of flow-equilibrating device on purification of flue gas from MSW incineration

The influences of flow-equilibrating device on flue gas purification by spray drying are studied numerically with RNG k-ε turbulent model and stochastic droplet track model. The effects of flow-equilibrating device on flue gas streamline, droplets distribution, internal resistance, adhering ratio and purification efficiency are investigated. The flow field is more uniform and symmetrical after the flow equalization plate is added. The internal resistance decreases gradually with increasing diameter of the opening area of flow equalization plate. The percentage of droplet adhering on the wall is first increased, and then decreased when opening area diameter increases from 0.2 to 0.7 m. The maximum value reaches 38.2% when the diameter equals to 0.4 m. The purification efficiency for SO2 and HCl has increased after the plate is added. The desulphurization efficiency increases from 60.25% to 68.56%. HCl removal efficiency increases from 93.73% to 97.62%. The results can provide theoretical basis for flue gas purifying system optimization and parameters selection.