AM80-0.2Sr-1.5Ca镁合金高温压缩过程动态再结晶模拟

在Gleeble-1500热压缩实验机上对AM80-0.2Sr-1.5Ca镁合金进行高温压缩实验，得到了该合金在温度为300~450 ℃、应变速率为0.01~1 s-1条件下的流变应力曲线.结合改进的Laasraoui-Jonas（L-J）位错密度模型和Kock-Mecking（K-M）位错密度模型，获得AM80-0.2Sr-1.5Ca镁合金在改进的L-J位错密度模型中的应变硬化参数和应变软化参数，建立该合金的动态再结晶模型.利用DEFORM-3D软件，实现了对AM80-0.2Sr-1.5Ca镁合金在450 ℃热压缩实验时微观组织演变和位错密度变化过程的有限元模拟，并与实际热压缩实验微观组织进行对比.研究结果表明：在相同的温度和应变量下，应变速率较低时，AM80-0.2Sr-1.5Ca镁合金组织粗大且晶粒分布不均，随着应变速率增大，再结晶组织细小均匀模拟与实验结果一致，说明求解的应变硬化参数和应变软化参数准确，所建立的动态再结晶模型能准确预测该合金高温压缩过程动态再结晶过程.     

基于EXCEL的作物灌水率图自动绘制与修正

在灌区的规划设计中,传统作物灌水率图的绘制一般都是手工方法,不仅效率低且修正起来很不方便,而且现有的灌水率图绘制软件一般存在着灌水率计算和灌水率图绘制相互独立、无法实时动态修正等不足.基此,综合利用EXCEL软件强大的数据处理、分析功能以及图形自动绘制功能,将灌水率计算与灌水率图绘制有机结合,从而实现灌水率图的快速绘制和动态调整.这种方法操作方便、简单,值得在工程设计部门推广使用.     

Contribution of green manure legumes to nitrogen dynamics in traditional winter wheat cropping system in the Loess Plateau of China

Excessive application of N fertilizer in pursuit of higher yields is common due to poor soil fertility and low crop productivity. However, this practice causes serious soil depletion and N loss in the traditional wheat cropping system in the Loess Plateau of China. Growing summer legumes as the green manure (GM) crop is a viable solution because of its unique ability to fix atmospheric N₂. Actually, little is known about the contribution of GM N to grain and N utilization in the subsequent crop. Therefore, we conducted a four-year field experiment with four winter wheat-based rotations (summer fallow-wheat, Huai bean–wheat, soybean–wheat, and mung bean–wheat) and four nitrogen fertilizer rates applied to wheat (0, 108, 135, and 162 kg N/ha) to investigate the fate of GM nitrogen via decomposition, utilization by wheat, and contribution to grain production and nitrogen economy through GM legumes. Here we showed that GM legumes accumulated 53–76 kg N/ha per year. After decomposing for approximately one year, more than 32 kg N/ha was released from GM legumes. The amount of nitrogen released via GM decomposition that was subsequently utilized by wheat was 7–27 kg N/ha. Incorporation of GM legumes effectively replaced 13–48% (average 31%) of the applied mineral nitrogen fertilizer. Additionally, the GM approach during the fallow period reduced the risk of nitrate-N leaching to depths of 0–100 cm and 100–200 cm by 4.8 and 19.6 kg N/ha, respectively. The soil nitrogen pool was effectively improved by incorporation of GM legumes at the times of wheat sowing. Cultivation of leguminous GM during summer is a better option than bare fallow to maintain the soil nitrogen pool, and decrease the rates required for N fertilization not only in the Loess Plateau of China but also in other similar dryland regions worldwide.     

旅游产业与文化产业融合的动力系统研究

旅游与文化具有共同的融合基因，旅游产业与文化产业融合的动力机制与融合路径是指导两者融合的重要理论基础。从产业融合的推力、拉力、支持力和阻力四个层面构建旅游产业与文化产业融合的动力模型，并依照旅游和文化双方经营主体在跨界资源重组中的角色与融合深度，提出旅游产业与文化产业融合的四种路径：整合融合、吸纳融合、渗透融合和重组融合。     

超甜玉米子粒果皮柔嫩度的变化规律

为了探讨超甜玉米果皮柔嫩度在子粒发育进程中的变化规律,以10份超甜玉米自交系为材料,采用硬度计法测定子粒发育过程中果皮柔嫩度值,分析果皮柔嫩度在不同环境条件下的变化。结果表明,10份参试材料在果皮柔嫩度上存在梯度差异,其中PE10果皮柔嫩性最好,T105中等,S33205最差;在湖北武汉(2014年春)、海南陵水(2014年冬)两种环境下,在授粉后第12~24天,PE10、T105、S33205的果皮柔嫩度值均呈上升趋势,且各测定时间点的柔嫩度均值由大到小的顺序均为S33205、T105、PE10;随着子粒的发育,相同材料在不同环境条件下果皮柔嫩度差异呈现先增大后缩小最后又趋于一致的规律;2014年湖北武汉春季与海南陵水冬季相比,同一材料最适采收期相差4 d,但最适采收期的果皮柔嫩度值差异不显著,说明环境改变会影响果皮嫩度变化速率,但果皮柔嫩度的好坏本质上仍决定于材料本身。     

动态细分饲粮营养供给对肉鸡生产性能、肉品质、氮与磷代谢率及血清生化指标的影响

本试验旨在根据肉鸡生长曲线及动态营养需要,研究动态细分饲粮营养供给对肉鸡生产性能、肉品质、氮、磷代谢率及血清生化指标的影响。选取1日龄爱拔益加(AA)肉鸡240只(公母各占1/2),随机分为3个组,分别为A组:每3.5 d 1个营养标准(1~7日龄1个营养标准);B组:每7 d 1个营养标准;C组:每14 d 1个营养标准。每组8个重复,每个重复10只鸡,试验期42 d。结果表明:1)C组肉鸡的平均日增重(ADG)显著高于A、B组(P0.05),料重比(F/G)显著低于A组(P0.05)。A、B组肉鸡生产性能指标差异均不显著(P0.05)。不同动态细分饲粮营养供给方式对肉鸡肉品质的影响无显著差异(P0.05)。2)不同动态细分饲粮营养供给方式对肉鸡氮、磷代谢率的影响无显著差异(P0.05)。3)肉鸡28日龄时,C组肉鸡血清尿素氮(UREA)含量显著高于A组(P0.05);42日龄时,C组肉鸡血清UREA含量显著高于A、B组(P0.05),但A、B组肉鸡血清UREA含量差异不显著(P0.05)。4)不同动态细分饲粮营养供给方式对肉鸡血清皮质酮(CORT)含量及总抗氧化能力(T-AOC)的影响差异不显著(P0.05)。综上所述,每14 d 1个营养标准可使肉鸡的生产性能达到最佳,从实际操作的复杂性考虑,每7 d 1个营养标准可更好地满足饲粮的氨基酸平衡。     

Reducing crude protein variability and maximizing savings when formulating corn-soybean meal-based feeds

Crude protein in corn and soybean meal have been documented to vary, and such inherent variability can result in under- or over-feeding of CP when feeds are formulated, leading to reduced bird growth, added input costs, and increased environmental pollution. The purpose of this study was to compare 2 grain-handling techniques and 2 feed formulation methods (linear vs. stochastic programming) to reduce CP variability in finished feeds and determine resulting costs or savings. The 2 grain-handling techniques were placing all the random batches of each delivered ingredient in to (1) a single bin (1-bin method) or (2) segregating above- and below-average samples into 2 bins (2-bin method). A fast way of estimating the composition of the ingredients is now available (near-infrared reflectance spectroscopy). Microsoft Excel workbooks were constructed to solve broiler starter feed formulation problems. Formulating feeds by linear and stochastic models based on the 2-bin method reduced CP variability by at least 50% compared with the 1-bin method. Formula cost was reduced by ˜20 cents per ton (averages of August 2012 United States ingredient prices) when the 2-bin method was used with the linear model. Formulating feed with a margin of safety increased formula cost by $3.40 per ton. Stochastic feed formulation increased formula cost to meet the specified CP level in feed at any probability of success, and formula cost was reduced substantially with the 2-bin method (up to $6.47 per ton). The magnitude of savings and reduced feed variability suggested that, regardless of the costs associated with building extra bins, the 2-bin method can be economically efficient in the long run. Therefore, it could be possible to split the batches of feed ingredients at a feed mill into above- or below-average bins before feed formulation to reduce CP variability and to maximize savings.     

Regional distribution of wheat yield and chemical fertilizer requirements in China

Quantification of currently attainable yield and fertilizer requirements can provide detailed information for assessing the food supply capacity and offer data support for agricultural decision-making. Datasets from a total of 5 408 field experiments were collected from 2000 to 2015 across the major wheat production regions in China to analyze the spatial distribution of wheat yield, the soil nutrient supply capacity(represented by relative yield, defined as the ratio of the yield under the omission of one of nitrogen(N), phosphorus(P) and potassium(K) to the yield under the full NPK fertilizer application), and N, P and K fertilizer requirements by combining the kriging interpolation method with the Nutrient Expert Decision Support System for Wheat. The results indicated that the average attainable yield was 6.4 t ha~(-1), with a coefficient of variation(CV) of 24.9% across all sites. The yields in North-central China(NCC) and the northern part of the Middle and Lower reaches of the Yangtze River(MLYR) were generally higher than 7 t ha~(-1), whereas the yields in Southwest China(SWC), Northeast China(NEC), and the eastern part of Northwest China(NWC) were usually less than 6 t ha~(-1). The precentage of area having a relative yield above 0.70, 0.85, and 0.85 for N, P, and K fertilizers accounted for 52.3, 74.7, and 95.9%, respectively. Variation existed in N, P, and K fertilizer requirements, with a CV of 24.8, 23.9, and 29.9%, respectively, across all sites. More fertilizer was needed in NCC and the northern part of the MLYR than in other regions. The average fertilizer requirement was 162, 72, and 57 kg ha~(-1) for N, P_2O_5, and K_2O fertilizers, respectively, across all sites. The incorporation of the spatial variation of attainable yield and fertilizer requirements into wheat production practices would benefit sustainable wheat production and environmental safety.     

木棉雄蕊特征与其繁殖策略的关系分析

采用野外观察和实验室检测方法,对云南省个旧市冷墩村的木棉花部结构、雄蕊特征、花粉活性进行研究。结果表明,自然种群中花部形态特征具有一定变异性,3层雄蕊变异系数大小关系显著。在湿度为60%、温度为35℃时花粉活性最强。研究发现,木棉雄蕊长短变化可能有利于不同传粉生物传粉效率提高和增强适应性;木棉高层雄蕊花药个体大、花粉数量多、活性高,适应干热河谷传粉繁殖条件;温度较低时,底层花药花粉活力相对较高,可为逆境环境下木棉高层花药受损后提供后备花粉源。文章就木棉花部形态与繁殖关系、木棉形态及花粉活力对繁殖的影响进行讨论。