火炬松材性变异规律的初步研究

对生长于广西南宁地区相同环境下来自美国的１８个种源１０年生火炬松的材性进行了研究。包括：材笥的种源变异。材性的地理变异模式及其与原产地气候因子的相互关系，材性因子间及其与生长因子、形态因子的相关分析。     

两种常温固化木材胶粘剂胶接强度分析

对两种木材用常温固化胶粘剂--单宁-甲醛胶粘剂和聚氨酯胶粘剂胶接的速生杨木的静态剪切强度进行了测试与分析.研究结果表明,以速生杨I-72为被胶接对象,自制的双组分型单宁胶压缩剪切强度范围为8.08～8.92MPa,但木破率较低,要满足日本集成材JAS标准中用胶规定,需进一步研究改进.相比较而言,聚氨酯胶粘剂的胶接强度较高,其压缩剪切强度值均在9.8MPa以上,木破率在75%以上,能够满足日本集成材JAS标准中用胶的规定.     

进口木地板坯料应注意的问题

本文提出了进口木地板坯料时应考虑南北气候差异及木材密度等材性差异来确定留有不同的加工余量，并建议海关按照国际惯例制定以净尺寸材积作为计税材积的标准，避免各港口实行不同征税标准，给企业进口地板坯料带来诸多困难。该建议已引起海关总署重视，并委托国家林业局起草单耗标准。     

真菌侵染对泡桐材微观结构及主要组分的影响

进行了变色真菌对泡桐木材微观构造及主要组分的影响研究,作了链格孢菌（Alternaria alternata)侵染泡桐木材试验,检测了真菌对泡桐木材的侵染状况,并确定了真菌侵蚀泡桐木材的主要部位,测试了泡桐木材在真菌作用下的成分变化,阐明了真菌导致泡桐木材发生变色的物理化学过程。     

改善实木复合地板尺寸稳定性的措施

研究了两种涂料配方的不同配比对木质复合地板尺寸稳定性的影响，结果表明：以醇酸清漆为主的涂料对地板产品进行后期处理，在产品尺寸稳定性和成本方面均优于其它涂料，合理选取涂料组分和配比，不仅能提高产品的尺寸稳定性，而且提高产品外观的美观度。     

Improvements in dimensional stability and lightfastness of wood by butyrylation using microwave heating

Microwave heating was used as the heat source for butyrylation of wood with the aim of reducing the reaction time. The photostability and dimensional stability of butyrylated wood were also investigated in this study. Chemical changes of wood were confirmed by cross polarization/magic angle spin ¹³C-nuclear magnetic resonance and diffuse reflectance infrared Fourier transform spectroscopy (DRIFT) after butyrylation by microwave heating. Results from DRIFT with the Si-Carb sampling technique revealed that, using microwave heating, a higher degree of butyrylation of maple wood occurred in the middle of the specimen than on the outer surface. The increase in yellowness index of butyrylated wood treated with microwave heating was much less than that of untreated wood after the lightfastness test, indicating that photoyellowing of wood is effectively inhibited by butyrylation using microwave heating. The dimensional stability of wood was also improved after modification.     

Automatic counting of annual rings on Pinus sylvestris end faces in sawmill industry

One of the essential requirements of current agricultural practice is the need to evolve towards crop techniques that make better use of productive factors behaving in sustainable and environmentally respectful ways. Pest control is one of the most important problems to take into account, due to the significant production losses that pests may cause. The Integrated Production for olive crop defines a set of rules that has to be followed in order to ensure a production of higher quality, and promotes an environmentally respectful model of Olive cultivation. This work presents SAIFA (spanish acronym for Sistema de Alerta e Información Fitosanitaria Andaluz - Andalusian Phitosanitary Information and Alert System) a web-based information system which allows monitoring the Integrated Production for the olive crop in Andalusia, Spain. SAIFA has been built as a tool to assist agricultural technicians to comply with the quality standards of Integrated Production, and to help decision makers to choose the actions to be performed in the crop. Also, it assists coordinators to choose an Integrated Production strategy applicable for the whole region with the main objective of ensuring the safety of crops and reporting the current phitosanitary state to the authorities.     

利用地径建立林木材积估测模型的探讨

通过实测铁杉、红桦和湖北花楸的地径、胸径、树高和材积，我们建立了根据林木地径估测树木材积的数学模型，具有较高的相关系数，可以应用于森林资源管理和森林生态系统研究。     

表面活性剂与纳米SiO2作用下聚合铝的絮凝特性

在6NTU高岭土原水中,溶入低浓度溶解性有机物-阴离子表面活性剂(十二烷基硫酸钠,SDS),投加聚合铝PAC与新型水处理剂-纳米SiO2稳定分散液进行动态混凝实验与静止沉降实验.借助图像分析技术与分形理论,对SDS与纳米SiO2作用下PAC的絮凝特性与絮体分形结构的形态学特征进行研究.结果表明:存在SDS时,高岭土颗粒表面ζ电位增加.SDS在颗粒表面的吸附等温曲线符合Langmiur方程;PAC对无机颗粒的去除效果明显,但对SDS的表观去除率较低.SDS阻碍絮凝初絮体的形成.纳米SiO2使颗粒表面ζ电位增加,对无机颗粒处理效果较差,但对去除有机物有利.絮凝机理主要是吸附架桥;助凝剂纳米SiO2能促进PAC对无机颗粒与SDS絮凝,处理效果显著.悬浊液中絮体粒径大,有效质量密度增加,沉速加快,分维值下降.     

黄瓜叶片大小解剖结构的对比研究

通过制作石蜡切片对4个黄瓜品种在3个时期的解剖结构进行了观察。其中D9320、D2005为叶面积大品种,D0455、D0401为叶面积小品种。结果表明,D9320、D2005叶面积大的原因是细胞平均面积大,而非数量多;D0401、D0455叶面积小的原因是细胞平均面积小,而非数量少。黄瓜叶为典型异面叶,表皮由一层紧密的形状不规则的表皮细胞组成,维管组织较发达,导管分布较多,上下表皮均分布有表皮毛,但以下表皮为主。