酚醛树脂对人工林杉木木材的浸注性及其改善的研究

研究了低分子量酚醛树脂对杉木木材的浸注性及树脂在木材内的分布状态，并对苯醇抽提前处理法、常压浸渍和真空浸注的效果进行了评价。无论抽提处理与否，常压浸渍的树脂水溶液充填率为理论最大浸注量的10％左右，而真空浸注可达到90％以上，真空浸注效果明显；无论是常压浸渍还是真空浸注，抽提处理后树脂的浸注性有很大改善，但常压浸渍的效果不是非常明显。软X射线解析样品纵向树脂分布状态结果表明：无论是否经过抽提处理，在常压浸渍的情况下，树脂主要分布在样品的端部，而经过真空浸注处理，树脂注入的深度增加，尤其经过抽提处理后树脂可达到样品中心。由此可见，抽提处理和真空浸注并用，使树脂的分布状态有很大改善。另外，抽提处理后样品之间树脂分布的差异也趋于减小，即树脂在样品间的分布状态也有改善。用实体显微镜观察树脂在木材细胞腔内的充填状况结果表明：沿着样品纵向从端部到中心树脂充填率呈下降趋势，而且抽提处理的充填率比未抽提处理的高。     

间伐小径木指接技术研究

间伐材指接胶合加工，变短材为长材，弯材为直材，为合理，有效利用间伐材开辟了新路。对间伐材木材含水率，指接端压的大小和时间，指接后养护时间，涂胶量，指榫规格等对指接材抗弯强度的影响进行了研究，并测定了苯酚，间苯二酚，甲醛树脂胶胶合的指接材快速老化性能。     

木质材料表面粗糙度光学付立叶测量方法的研究

阐述了木质材料表面粗糙度现有的测量技术与研究现状，研究了木质材料表面的统计模型和一维高斯型木质材料表面光学付立叶变换谱强度分布的模型，并得到了计算木质材料表面粗糙度均方根误差和自相关函数的数学公式。测量两个参数的实验系统，将具有非接触、高测量速度、测量不受被测材料影响和能得到比较多的轮廓信息等优点，进一步完善后，可用于木质材料表面粗糙度的分类检测及监控。     

论节能式炉气体木材干燥室的设计

本文讨论了节能式炉气干燥室设计的一些技术问题，如提高自生风引力增强通风；多种传热方式并用，增强传热，降低热损失的途径等，以达到节能降耗、快速干燥的目的。     

云南东南部天然沙罗竹林分结构规律的研究

沙罗竹为大中型丛生竹类,生长较好的天然竹林主要集中分布在云南河口——屏边大围山海拔500 m地区的沟谷地带,面积约5 000 hm2,具有很高的开发利用价值。该文对其林分的密度、直径、生物量等因子变化规律及其相互关系首次进行了系统研究。     

Characterization of wood-based multi-material systems under dynamic impact stress

ABSTRACT

Due to its naturally grown properties, wood has played a rather subordinate role as a material for technical applications up to now. In this paper, multi-material systems based on veneers of beech (Fagus sylvatica) with different reinforcing variants were investigated. In addition to the influence of different adhesive systems (urea formaldehyde and polyurethane), the effect of reinforcing by aramid fiber fabric and stainless steel foil in different climates was examined. At the center of the investigations were dynamically sudden loads, in the form of impact bending and dart drop tests (penetration and impact mode). It has been shown that the use of the reinforcing materials leads to a significant improvement in material properties. The penetration energy of the composites reinforced with the aramid fiber fabric could be increased by 43%. The maximum force in the dart drop test (impact mode) could be increased by 29% with the stainless steel foil, the damping decreased by 48%. The aramid fiber reinforcement achieved an increase in impact resistance by 27% in impact bending test, the steel reinforced achieved an increase of 39%. A clear dependency on both, the climate and the adhesive within the composite, could be demonstrated.     

混凝土结构的加固修复

本文谈了我国混凝土建筑结构加固修复技术的现状、我国混凝土加固方法的工艺特点和存在的问题 ,并介绍了提高混凝土加固修复工程质量的基本对策     

Improvements in dimensional stability and lightfastness of wood by butyrylation using microwave heating

Microwave heating was used as the heat source for butyrylation of wood with the aim of reducing the reaction time. The photostability and dimensional stability of butyrylated wood were also investigated in this study. Chemical changes of wood were confirmed by cross polarization/magic angle spin ¹³C-nuclear magnetic resonance and diffuse reflectance infrared Fourier transform spectroscopy (DRIFT) after butyrylation by microwave heating. Results from DRIFT with the Si-Carb sampling technique revealed that, using microwave heating, a higher degree of butyrylation of maple wood occurred in the middle of the specimen than on the outer surface. The increase in yellowness index of butyrylated wood treated with microwave heating was much less than that of untreated wood after the lightfastness test, indicating that photoyellowing of wood is effectively inhibited by butyrylation using microwave heating. The dimensional stability of wood was also improved after modification.     

Promoting old-growth characteristics and long-term wood production in Douglas-fir forests

Trade-offs among wood production, wood quality and ecological characteristics in the management of harvested forest stands are explored through model simulation of various silvicultural regimes. Long-term production of merchantable wood, production of various types of high-quality wood, and the level of certain quantitative ecological indicators are projected for coniferous forests of Pacific Northwestern USA. The set of ecological indicators used is based on the species composition and physical structure of old, unlogged forest stands. Simulations are performed with an ecological model of forest stand dynamics that tracks the fate of live and dead trees. Short rotations (<50 years) produce the least amount of high-quality wood over the multi-century simulation period. They also fail to generate ecological attributes resembling those of old forest stands. Production of high-quality wood is moderate to high under all rotations of 80 years or more; however, most ecological indicators require longer rotations unless alternatives to clearcutting are applied. Alternatives examined include retention of 15% cover of live tree canopy at each harvest in combination with artificial thinning between harvests. Thinning from below can expedite the development of large live and dead trees, and canopy height diversity without greatly diminishing wood quantity or quality. Proportional thinning retains understory stems, thereby expediting the recruitment of shade-tolerant trees. A possible drawback to thinning, particularly proportional thinning, is the diminished production of clean-bole wood at rotations of 150 and 260 years. It is concluded that most wood quantity, wood quality and ecological objectives can be met with long rotations (ca. 260 years). Certain objectives can be met with shorter rotations (80–150 years) when treatments of thinning and canopy tree retention are applied.     

Rapid production of high-strength cement-bonded particleboard using gaseous or supercritical carbon dioxide

This study deals with the effects of curing treatment with gaseous and supercritical carbon dioxide on the properties of cement-bonded particleboard (CBP) manufactured by the conventional cold-pressing method. The hydration of cement and the mechanism of improvement were examined using X-ray diffractometry (XRD), thermal gravimetry (TG-DTG), and scanning electron microscopy (SEM) observations. The results are as follows: (1) The curing of cement was accelerated concomitantly with the improvement in mechanical and dimensional properties of CBP significantly by curing with gaseous or supercritical carbon dioxide. (2) Supercritical carbon dioxide curing imparted boards optimal properties at a faster rate than did gaseous curing. (3) Accelerated formation of calcium silicate hydrate and calcium carbonate and the interlocking of those hydration products on the wood surface are potentially the main reasons for the superior strength of carbon dioxide-cured boards.