湿热蒸汽处理木质材料温度动态监测研究

作为一种替代溴甲烷熏蒸木材的技术,湿热蒸汽处理具有突出的环保性。试验通过智能换热站提供湿热蒸汽,设计了钢材框架悬挂耐高温气囊的试验装置,对原木、樟子松拼板、樟子松锯材和单板层积材进行湿热蒸汽处理,并对木材内部升温进行动态监测。利用温度记录仪收集了各温度监测点4 h内的温度实时数据,以及耐高温气囊内部的环境温度实时数据,对湿热蒸汽环境下木质材料不同位置的升温过程进行比较分析,结果表明:木质材料与湿热蒸汽的接触面积是影响其升温速率的关键因素;较大尺寸的木质材料升温速率更高;人造板材与天然木材升温速率基本相同。     

中国主要人工林树种幼龄材与成熟材及人工林与天然林木材性质比较研究

本文对中国１０种人工林和４种天然林的幼龄材与成熟材及４个树种的人工林木材与天然林木材的构造特征、化学性质、物理性质、力学性质的３３项材性指标差异进行了比较研究。结果表明,在幼龄材与成熟材之间,在统计上表现出差异显著性的为幼龄材比成熟材生长轮宽,管胞列数多,管胞短,直径小,微纤丝角大,密度小,径向干缩小,差异干缩大,流体扩散性高,抗弯强度、抗弯弹性模量、顺纹抗压强度、径面顺纹抗剪强度、径面抗劈力和冲击韧性低等１５项,即４６％的测试项目差异显著;表明在木材加工和用作结构材时应将幼龄材和成熟材视作两个性质不同的总体来考虑,在培育结构材时应研究如何缩短幼年期或改善幼年期材性。在人工林与天然林木材之间,采取人工林幼龄材性质与天然林幼龄材性质相比,人工林成熟材性质与天然林成熟材性质相比,结果表明,多数性质在统计上差异不显著,只有人工林木材比天然林木材胞壁率小、顺纹抗压强度低、差异干缩大、流体扩散性高等４项,即只有１２％的很少数测试项目差异显著;表明有可能通过人工培育的方法培育出与天然林木材性质相近的木材。     

Crown morphology of Norway spruce from usual tree measurements

Intr0ducti0nNorwayspruce(PiceaabiesKarst)is0l1eoflI1e111ostimportal1tc011iferinFra11ce.lnl99l,tI1etotaIareaofNorwaysprLICewasestimatedt0be723000I11112.ItsvoIUmewasl27Inilli0I1m3.Tl1eanl1uaIvoILl111eiI1crc-mentwas5.74millionm3.ltiswideIyacceptedII1atIargeri11itialspacingssI1ouldbeusednow.l111940's,thedensity0ftl1epIantatiol1rangedfr0m5000to10000stems/hm2.Nowtl1einitiaIdensityvariesbetweenI000to250Ostems/I1m2.TI1eIargestspacit1g111aybe650~800stems/hm2.S0ithasasignifica11cetostLldyt…     

木材选用咨询专家系统的设计

阐述了木材选用咨询专家系统的建立，着重介绍了面向对象的知识表示方法在系统的规划与设计过程中的实现，以及系统结构、知识库和推理策略的设计与实现，并指出在实际生产中的意义。     

锈色粒肩天牛与寄主树种关系的初步研究

在连续 3a的定位观测和分析基础上 ,本文初步报道了锈色粒肩天牛与文献报道中的几种寄主树种之间的关系。结果如下 :(1)根据室内饲养下成虫对不同树种的取食及产卵情况和在不同树种上接种 (卵 )的幼虫情况 ,可将几种寄主树种分为 4类 :高感树种 (国槐 )、低感树种 (云实、黄檀 )、抗虫树种 (刺槐 )、免疫树种 (旱柳 ) ;(2 )酚酸类物质在旱柳中的含量 (3 0 3～ 9 73mg·(10 0g) - 1 ) ,显著高于其它树种中的含量 (1 71～5 39mg·(10 0g) - 1 ) ,可能是锈色粒肩天牛在旱柳上表现拒食、拒产卵、拒钻蛀的重要原因。氨基酸含量较高、组分相对最全 (17种 ) ,以及较高的C N值 ,是国槐基本营养物质的显著特征 ,这可能是锈色粒肩天牛嗜食国槐 ,对其造成严重危害的根本原因。锈色粒肩天牛很少取食危害刺槐 ,这与刺槐树种的各部分C N值过低 ,造成营养失调有关。黄檀木材纤维平均长度为 0 837mm ,平均宽度为 18 90 μm ,长宽比为 5 0 96 ,其韧性是参试树种中最大的 ,因而可能造成幼虫啃食困难 ,加上木材中的C N低 (0 36 ) ,因此 ,具有较强的抗虫性。云实树皮薄而光滑 ,造成成虫产卵困难 ,因此 ,在自然状态下 ,锈色粒肩天牛不易对其产生危害。     

木材的变色

本文论述了木材变色的特征及其防治措施 ,介绍了有代表性色调的变色特征、除色和防变色方法 ,同时探讨了已变色木材的普通除色方法、变色木材的利用以及药液处理时应注意的事项     

温湿度控制系统对木材干燥的影响及优化设计

通过对常规蒸汽窑干燥木材过程中影响空气温度、湿度控制稳定性因素的分析,以及对当前国内木材干燥行业所使用的温、湿度控制仪器中控制类型及控制方式的分析,认为采用干、湿球温度计方式;以先进的智能湿度测控仪表、一些逻辑元件及电子电路组成适合于木材干燥工艺的木材干燥温、湿度半自动控制是比较经济实用的。分析了全自动控制的优缺点并对其不足之处提出了一些改进建议。     

Tree cavities in forests - The broad distribution pattern of a keystone structure for biodiversity

We explored the main factors affecting the global distribution of tree cavities - a habitat component of mostly biotic origin that is crucial for many animal species. We considered the influence of eight environmental variables (ranging from the single-tree to the biogeographic-region scale) on cavity density in a meta-analysis of 103 published studies. The global median density of cavities was 16 ha⁻¹, with densities highest in Australasia and lowest in the Palaearctic region. Two major factors influencing density were identified: cavity density was positively related to the amount of precipitation, and was higher in natural than in managed forests. These effects suggest that the distribution of tree cavities largely reflects the incidence of fungal heart-rot in trees, and that forest management, by affecting wood decay processes, can have a broad-scale impact on tree microhabitat availability. Although air temperature, forest composition and wood hardness had suggestive univariate effects, neither these variables nor biogeographic region explained any additional variation in multifactor models. In regions where woodpeckers are present there was an upper limit to the density of woodpecker-excavated cavities (approximately 10-20 cavities ha⁻¹) that was considerably lower than the highest total cavity densities encountered (up to 140 ha⁻¹). This indicates that primary cavity-nesters are particularly important keystone species in cavity-poor forests where wood decay processes are suppressed either climatically or by forest management.     

温度对木材性能影响的研究概况

在广泛检索文献的基础上,对近年来温度对木材性能影响的研究概况进行总结,为后续的深入研究和探讨提供参考。     

Wood ash fertilization alters the forest humus Archaea community

The combined and separate effects of Cd and wood ash on Archaea from coniferous forest humus were studied in a microcosm experiment. Nonmetric multidimensional scaling of the denaturing gradient gel analysis of polymerase chain reaction amplified 0.9 kb 16S ribosomal DNA fragments revealed changes in archaeal communities due to the ash treatments. Cd with or without ash did not further influence the result. Representatives of the ash and control communities were cloned, grouped by restriction fragment length polymorphism analysis and finally sequenced. All sequences belonged to non-thermophilic Crenarchaea.