硫酸盐草浆黑液制粉状活性炭的研究

本文探讨硫酸盐草浆纸厂黑液的治理和利用,提出用酸化法从黑液中沉析木素制取粉状活性炭。大约生产10t草浆可制取1t优质粉状活性炭。同时还含有占总碱量24%的Na_2S可回收。排出的废液即使不再经过处理,其污染程度也已大大降低。     

木质素-LDPE扭矩流变性能试验研究

研究了影响木质素与低密度聚乙烯(LDPE)共混物在转矩流变仪中的共混最大扭矩、平衡扭矩以及达到平衡扭矩时间的各个因素。结果表明,木质素、淀粉降解母料、增塑剂、温度对扭矩有明显影响;在LDPE为100份时,木质素55份,淀粉母料25份,增塑剂占木质素7.5%,增容剂10.5份,温度为180℃,共混物塑化性能最优。     

木质素电氧化的影响因素研究

木质素是天然高分子聚合物，具有一定的化学反应惰性。本文率先研究草类木质素在膜助电解时的电化学氧化作用。其结果表明：膜助电解对黑液中的有机物具有一定的氧化作用，能使木质素中的芳环被氧化而打开；同时木质素的氧化作用与施加的电压、阳极的电极材料等因素有关。通过对木质素氧化产物结构的进一步研究，可为木质素的电化学改性提供了新的方法。     

3种白腐菌木质素降解酶的比较

对3种白腐菌——黄孢原毛平革菌、变色栓菌和木质层孔菌在恒温振荡培养条件下产漆酶、锰过氧化物酶的情况进行比较研究,同时还对此3种菌在培养过程中还原糖的变化作了研究.结果表明:3种白腐菌中变色栓菌产漆酶相对最高,其漆酶酶活最高达到136.5 U/L,产酶最高时间为第8天;而木质层孔菌产锰过氧化物酶相对最高,其最高酶活达到880.2 U/L,产酶最高时间为第8天;同时在培养过程中还原糖含量随培养时间的延长而逐渐降低.     

PCR法克隆紫穗槐4-香豆酸:CoA连接酶全长cDNA

4 香豆酸 :CoA连接酶 (4CL)是木质素生物合成过程中重要的酶 .该文利用简并寡核苷酸PCR法结合cDNA末端快速扩增PCR法直接获得了紫穗槐 4CLAcDNA全长序列 ,避免了复杂的构建、筛选cDNA文库的过程 .先用简并PCR得到了 4CLA1片段 ,又据此片段设计反向嵌套引物 ,用RACE方法获得未知的 5′和 3′端序列 .所获得的全长 4CLAcDNA ,编码 5 40个氨基酸 .氨基酸序列同源性分析表明4CLA是典型的 4CL蛋白 ,含有预计的AMP binding位点、催化反应区和保守的Cys .     

Lignin fragments rich in detached side-chain structures found in water-soluble LCC

The content of the glyceraldehyde-2-aryl ether-type structure in water-soluble lignin–carbohydrate complex (LCC) fractions, which were obtained from Japanese cedar and birch residual wood meal after milled wood lignin isolation, was determined by ozonation. Quite high amounts of the glyceraldehyde-2-aryl ether-type structure were found in water-soluble LCC fractions of both species; about 3–5 times higher than those of other fractions. This result, as well as the high content of the β-1 structure in these fractions shown in our previous reports, suggest that lignin in these fractions has the characteristics of endwise-type lignin, because the glyceraldehyde-2-aryl ether-type structure and β-1 structure are typical characteristics of this type of lignin fraction. These results are in good agreement with the generally accepted hypothesis that the glyceraldehyde-2-aryl ether-type structure and β-1 structure are generated at the same time by a radical coupling reaction. The results also indicated that these two structures are present in close proximity in the lignin.     

纤维素废料与造纸黑液木质素制人造木材之探讨

介绍了现有人造木材的种类，阐述了用竹刨花、竹（木）屑等竹（木）加工剩余物或农作物秸秆与造纸黑液中提取的木质素开发人造木材的重大意义，简要介绍了该人造木材的制造原理和方法以及产品的用途，并分析了人造木材的市场前景及其产业化的可行性。     

Tephrosia species and provenances for improved fallows in southern Africa

Seeking an alternative to Sesbania spp. tree fallows, a Tephrosia species and provenance trial was conducted at Msekera Research Station, Chipata (Zambia) to evaluate eleven Tephrosia vogelii and three Tephrosia candida provenances. They were tested for biomass production, quality of biomass, resistance to root-knot nematodes, nitrogen release, and for their effects on soil nitrogen dynamics. At the end of 1.5 years, the T. candida provenances 02970, 02971 and 02972 from Madagascar produced two times greater amount of aboveground biomass than the T. vogelii provenances. There was little variability among the T. vogelii provenances in terms of litter and biomass production. Weed growth was significantly greater under T. vogelii than T. candida provenances. While Tephrosia vogelii provenance 98/02 from Zambia and T. candida 02972 were highly tolerant to the Meloidogyne incognita nematodes, T. vogelii provenances 02977, 98/03, 02973 from Kenya, Zambia and Malawi, respectively, were highly susceptible to the nematodes. The Tephrosia species and provenances showed a wide variability in terms of N, lignin and polyphenol concentration in their foliage. Mineralization of N in the foliage of T. candida provenances 02970 and 02971 and T. vogelii provenances 98/04 and 02974 from Malawi occurred rapidly within 14 weeks of incubation. At the end of the 2-year growth period, there was significantly greater total inorganic N under T. candida provenance 02972 (12.5 mg kg⁻¹) than T. vogelii (5 mg kg⁻¹) provenance Mungwi 98/02. Maize (Zea mays L.) yields after T. candida provenances were greater than those after T. vogelii provenances. Further testing of the most promising provenances is needed for their effects on subsequent maize yields under a range of farm conditions. This revised version was published online in June 2006 with corrections to the Cover Date.     

甲醛交联碱木质素-聚乙烯醇-尿素薄膜氮元素缓释性能研究

采用交联法制备了碱木质素-聚乙烯醇-尿素-甲醛(AL-PVA-U-F)交联薄膜,分析碱木质素(AL)和交联剂甲醛(F)的加入量对氮元素缓释的影响,研究薄膜对氮元素的缓释机理,并采用XRD和FT-IR-ATR方法分析薄膜的结晶度和化学结构,结果显示碱木质素的加入可降低薄膜中氮元素的缓释速率,使氮元素达到释放平衡的时间增大,碱木质素和聚乙烯醇质量比5∶5时复合薄膜192 h时达到释放平衡,释放平衡时间最长,氮元素累积释放率最大为77.73%。加入适量的甲醛交联剂使碱木质素、聚乙烯醇、尿素、甲醛之间发生化学反应,线性和网状结构交互从而使薄膜中氮元素缓释减慢。与共混薄膜(ALPVA-U)相比,甲醛的交联作用使薄膜的结晶度降低。薄膜的氮元素累积释放率曲线呈"S"型趋势,Ritger-Peppas模型和2次多项式模型拟合较好,相关系数(R2)分别为0.976 3和0.950 9,Ritger-Peppas模型中n为0.816 7,说明氮元素释放规律是扩散和溶蚀综合作用的结果。     

镍基和均相酸催化废弃木质素的溶剂热降解

采用热化学方法降解木质素生成单体和低聚体产物。通过改变溶剂和使用均相酸、镍基催化剂,促进木质素热降解,提高油收率,改善油品质。结果表明:在密封条件下,250℃反应1 h甲醇和水协同促进了木质素降解。水/甲醇/甲酸溶剂中反应的残渣率降低至14.9%,油收率提高至44.1%。添加均相酸HCl、H3PO4和非均相催化剂Ni、Ni/Si O2-Al2O3,促进了原料裂解,抑制了产物缩合,反应生成单体、二聚体为主的油产物。Ni/Si O2-Al2O3催化促进了不饱和脂肪烃的重整和含氧官能团的减少,油收率显著下降。Ni催化则能够同时获得更好的油品质和较高的油收率(41.7%)。