辣木的染色体制片优化及核型分析

以辣木分生组织为材料,采用酶解去壁低渗法制片,探讨不同取材部位、预处理方式和酶解时间对辣木染色体制片的影响,并对其进行核型分析,以期为辣木的起源、演化及遗传育种提供一定理论依据。结果表明:以辣木新枝茎尖为最佳取材部位,用饱和对二氯苯预处理2 h,再用4%纤维素酶和5%果胶酶混合物酶解4 h,制片所得染色体效果最佳。核型分析表明,辣木染色体属于小染色体,有28条,核型公式为2n=2x=2n=28m,属于1B类型,核型不对称系数60.29%,核型对称程度较高,这表明辣木在进化中可能处于比较原始类型。     

茎用芥菜新品种1年2代繁育研究初报

为了探索福建省茎用芥菜1年2代繁育技术,选择6个茎用芥菜品种,分别进行冬春季正常繁育和夏秋季高山加代繁育的2代繁育试验,并对比各品种2代繁育的生育期、株高、株幅和种子产量。结果表明：所有参试茎用芥菜品种只要通过打破种子休眠、衔接好2代繁育的播种期都能完成1周年2代繁育,夏秋季高山加代繁育的全生育期比冬春季正常繁育平均缩短约50 d;冬春季繁育比夏秋季高山加代繁育株高增加31.2%～132.9%,株幅增加1.5%～21.8%,所有参试品种冬春季繁育的种子产量都极显著高于相应夏秋季高山加代繁育,种子产量增加17.8%～153.6%。     

Strategy to identify resistance to white mould associated with high yield for irrigated common bean in Brazil

Development of common bean cultivars with partial white mould resistance through breeding techniques has been a challenge in Brazil. As yet, lines/cultivars from breeding programmes have not been investigated for resistance; therefore, this study screened 107 lines/cultivars for their reactions to white mould in 14 preliminary trials conducted under irrigation. Thirteen resistant lines/cultivars (three of Andean origin) and six Mesoamerican cultivars (three intermediately resistant and three susceptible) were selected for further investigation. These lines/cultivars and the resistant control A195 were evaluated in six advanced trials and two straw tests to assess the effectiveness of the screening procedure. In 11 preliminary trials, screenings were performed under moderate/high or higher disease pressure. These pressures occurred in two advanced trials in which, when yields were averaged across moderate/high and high pressures, 10 Mesoamerican lines/cultivars selected for resistance yielded 14%, 23%, and 38% more than intermediately resistant cultivars, A195, and susceptible cultivars, with median disease ratings (1–9 scale) of 4.5, 5.7, 5.7, and 6.7, respectively. In the straw test, three Andean lines/cultivars (A195 included) and two susceptible cultivars in the field were among those with the highest levels of physiological resistance. Thus, field rating under high disease pressure and greenhouse rating did not correlate significantly, suggesting that field trials are critical to evaluating resistance and to identifying high-yielding beans. Therefore, lines/cultivars from breeding programmes assessed in field trials may provide a low cost and fast way to identify high-yielding bean cultivars with partial resistance to white mould in the subtropical southern hemisphere.     

Banishing barberry: The history of Berberis vulgaris prevalence and wheat stem rust incidence across Britain

Wheat stem rust, caused by the fungus Puccinia graminis f. sp. tritici (Pgt), is a notoriously damaging disease of wheat and barley. Pgt requires two hosts to complete its lifecycle; undergoing asexual reproduction on cereal crops and completing sexual reproduction on Berberis spp. The latter stage of its lifecycle is of particular importance in temperate regions such as western Europe, where asexual urediniospores are unable to survive cold winter weather. In the past, the crucial role of Berberis in the lifecycle of stem rust led to intensive eradication campaigns, initially carried out by farmers in the face of hostile scientific opinion. In the United Kingdom, common barberry (Berberis vulgaris) is today a relatively rare plant. Stem rust is, however, currently experiencing a resurgence; at the same time, there has been a general increase in the prevalence of barberry and an upsurge in its planting which, in the United Kingdom, is associated with attempts to encourage the endangered barberry carpet moth (Pareulype berberata). This article situates current developments within a broader chronological framework, examining changing attitudes towards barberry and rust in England in the past and the history of the plant's use and cultivation. It assesses how widespread B. vulgaris really was in the environment historically, and thus the scale of its eradication. We suggest that Berberis was never widely established as an archaeophyte in the United Kingdom. Current attempts to re-establish it are based on a misunderstanding of the plant's historical status and could potentially pose a serious threat to food security.     

甜玉米茎秆强度相关性状的数量性状基因座定位

为选育抗倒伏玉米品种,挖掘甜玉米茎秆强度相关性状的数量性状基因座（quantitative trait locus,QTL）,应用复合区间作图法以甜玉米组合T49×T56的F₂为作图群体,通过测定F_2：3家系的茎秆穿刺强度、茎秆抗压强度和茎秆弯折性能3个性状进行相关性状的QTL定位。结果表明,遗传连锁图谱包含153个SSR标记位点,覆盖玉米基因组1 199.1 cM,平均图距7.83 cM。3个性状共检测到10个QTL,其中与茎秆穿刺强度相关的2个QTL位于第3、7染色体上,解释11.81%和22.15%的表型变异,与茎秆抗压强度相关的4个QTL位于第1、3、7染色体上,单个QTL可解释3.68%~33.26%的表型变异,与茎秆弯折性能相关的4个QTL位于第3、6、8染色体上,单个QTL可解释3.55%~18.58%的表型变异。第7染色体检测到1个同时控制茎秆穿刺强度和茎秆抗压强度2个性状的QTL,位于umc1015~umc1987标记区间,分别可解释11.81%和33.26%的表型变异,第3染色体检测到1个同时控制茎秆穿刺强度、茎秆抗压强度、茎秆弯折性能3个性状的QTL,位于umc1400~dupssr23标记区间,分别可解释22.15%、13.27%和18.58%的表型变异。3个茎秆强度性状共同检测到的主效QTL,可在育种实践中用于分子标记辅助选择和抗倒伏玉米品种的选育。     

油棕叶梗重组方材制备工艺

以油棕叶梗为原材料、酚醛树脂为胶黏剂,采用正交试验方法研究重组方材密度、施胶量、热压时间和热压温度对油棕叶梗重组方材力学性能的影响。结果表明,密度对油棕叶梗重组方材性能的影响较大,密度和施胶量越大,重组方材力学性能越好;热压温度和热压时间对油棕叶梗重组方材性能的影响比较复杂。综合考虑确定油棕叶梗重组方材的较优制备工艺条件为:密度0.7 g/cm³,施胶量12%,热压温度180℃,热压时间40 min;较优工艺条件下油棕叶梗重组方材的弹性模量为7 185 MPa,静曲强度为68.7 MPa,顺纹抗压强度为35 MPa,内结合强度为0.21 MPa。密度为0.7 g/cm³的油棕叶梗重组方材的弹性模量、静曲强度、顺纹抗压强度高于了杉木的性能。     

钾肥和硅肥对油用亚麻茎秆抗倒伏特性的影响

为了优化油用亚麻抗倒伏的肥料运筹措施,以‘陇亚11号’和‘定亚23号’为试验材料,通过裂区设计,研究了钾肥（不施钾、52.5 kg K₂O/hm²和105 kg K₂O /hm² 3个水平）和硅肥（不施硅和90 kg SiO₂/hm² 2个水平）用量对油用亚麻茎秆形态学、力学抗倒伏特性及产量的影响。结果表明：‘陇亚11号’的株高、重心高度及茎粗、壁厚、抗折力均显著大于‘定亚23号’,茎秆形态学及力学抗倒伏特性的综合影响下,‘陇亚11号’较‘定亚23号’倒伏率提高21.24%而产量降低9.43%。钾肥显著改善了抗倒的茎秆表观形态学特性,施钾后茎粗、壁厚、茎秆抗折力、抗倒伏指数提高而株高和重心高度降低,千粒重和籽粒产量分别提高7.35%和9.34%。硅肥对茎秆形态学、力学特性及籽粒产量均无主效应,但硅肥与钾肥的互作使茎粗显著增加。抗倒伏指数与茎粗、壁厚呈显著正相关,与株高、重心高度呈显著负相关。品种间的茎秆抗倒伏特性差异较大,施用钾肥显著改善了抗倒的茎秆表观形态学特性,优化了茎秆机械性能,增强了油用亚麻的抗倒伏能力;供钾量较低时,硅肥与钾肥对茎粗的互作正效应明显。     

不同行距配比对玉米光合生理指标及茎秆特性的影响

以‘大丰30’为试验材料,在同一密度下（75000株/hm²）设置5种不同行距配比,研究不同行距配比对玉米光合生理指标及茎秆力学特性的影响。结果表明：行距配比为40 cm×80 cm时,棒三叶的叶绿素含量(SPAD)在灌浆期达到峰值;行距配比为30 cm×90 cm时,棒三叶净光合速率在灌浆期最高。大口期开始,行距配比为40 cm×80 cm时,叶面积指数(LAI)最高。单株干物质积累量以40 cm×80 cm最高。各行距配比的茎秆硬皮穿刺强度与茎秆弯曲性能随着节位的下降均呈逐渐增强的趋势,从大到小为 40 cm×80 cm>50 cm×70 cm>30 cm×90 cm>60 cm×60 cm>20 cm×100 cm。穗长、穗粗、千粒重和穗粒数各处理间均有不同变化,行距配比为40 cm×80 cm时产量最高,比等行距60 cm×60 cm增产7.96%。由此可见,行距配比为40 cm×80 cm,有利于大穗型品种‘大丰30’的光合性能和茎秆强度的提高,从而达到抗倒伏增产的目的。     

马尾松茎木质部产生与水热关系的初报

在马尾松年生长周期中，定位逐月采样，比较解剖形成层活动的数量和产生木质部的结构与旬均温和旬雨量的关系．纺锤状原始细胞的分裂次数明显受温度控制，在月均温１３．５～２９．３℃的活动期中，以１７．１～２７．８℃分裂较快，并有一定抗旱性；在连续旬雨量１０ｍｍ以下，仍能形成纺锤状细胞．管胞分化的下限温度约１１℃，雨量是调节管胞腔径及壁、腔比值变化的主要因素．木射线细胞的生长受管胞结构的影响，其长和宽的扩大分别随管胞腔径和壁、腔比值提高而增加，在正常温度范围内，间隔性干旱有促进树脂道的形成．     

河北(承德)板栗溃疡病病原鉴定及其综合防治

笔者报道了在河北承德宽城县严重发生的一种板栗枝干病害,该病害引起树皮腐烂,造成大量2～3年生板栗树死亡,经室内病原菌鉴定,确定其病原菌为半知菌亚门壳梭孢属(Fusicoccum)真菌,同时提出了病害的综合控制措施。