矿区铁路道口栏门自动关门防护电路设计与实施

本文分析道口栏门自动误关门的时机和原因,以及对道口自动信号报警电路的研究,设计了栏门关门与道口自动信号报警的联锁防护电路,防止道口栏门误动与公路车辆发生相撞事故。     

北广10KW中波发射机射频驱动的维护

本文浅叙述了DAM中波广播发射机推动级功率合成器的一次特殊故障排除,及推动级的调整方法。     

通用变频器常见的驱动电路形式及分析

随着电力电子技术，微电子技术和现代控制理论在交流调速系统中的应用，变频交流调速已逐渐取代了过去的滑差调速，变极调速，直流调速等调速系统，越来越广泛的应用于工业生产和日常生活的许多领域。本文主要通过对通用变频器驱动电路的分析，了解一些驱动电路的常见形式及发展趋势，满足解决现场实际问题的需要。     

Application of Multi-vertical-line-element Model of RC Walls and Discussion on IT

The inelastic dynamic response analysis program for frame-shear wall structures developed by the authors is introduced firstly, in which the multi-vertical-line-element model was adopted for shear walls and the refined single-component model was used for beams and columns in frame.By analyzing three-story structural models tested in shaking-table in a famous foreign research institute, the validity of the modeling of shear wall in the program was verified. The analytical results indicate that the inelastic dynamic responseof shear walls under random ground motion input can be predicted effectively withthe program. Finally, with the preliminary discussion of some key points in modeling of shear wall, some suggestions areput forward for further improving and refining the multi-vertical-line-element model.     

Primary Study of Applicability of Plane-section Assumption of Shaped RC Columns

Adopting the element SOLID65 and LINK8 in the general finite element analysis software ANSYS and fiber model beam-column element based on finite element flexibility method respectively, the comparative analysis of the cross, L and T-shaped RC columns under compression, bending, shear and torsion with flange width-thickness ratio of 4:1 is carried out. The applicability of plane section assumption in the nonlinear analysis is discussed primarily, which shows that it is feasible on the whole for shaped RC columns with flange width-thickness ratio equal to or smaller than 4:1.     

Development of Assembly-Type RC Structure and Building Industrialization

Based on the analysis of the status of building construction in China, the development of Assembled Structure System (ASS) can solve not only the problems in construction, but also is the key for realization of building industrialization. On the basis of technique innovations, a study on the structural performance, construction method and precast production of ASS should be carried out to inherit the old one and overcome its demerits. The process reengineering should be done in the construction enterprise to promote the development of building industrialization.     

浅谈电能表几种常见接线错误

从电能表的基本计量原理 P=UIcosφ可知 ,一个电能表能否正确计量 ,取决于电能表的质量及安装和接线的正确性。接线错误 ,会直接导致电能表慢转、不转或倒转等异常现象 ,甚至烧毁电表。本文介绍电能表几种常见接线错误 ,从接线错误对输入电能表的电压、电流及他们之间的相位关系的影响来分析。低压三相三线制电路有功的测量 ,供电部门习惯上采用一只三相二元件电能表计量 ,如图 1所示。(a)　接线图　　　 (b)　向量图图 1　三相二元件电能表正确接线图输入电能表的电压、电流分别是 Uab、Ia和 Ucb、Ic。当三相系统完全对称时 ,则…     

用于直流传动控制系统的串行通讯

介绍了用Visual Basic提供的串行通讯控件，通过编程实现了PC机与应用单片机触发电路的直流传动系统的通信。     

汽车起动电路的故障分析与检查

东风EQ140、北京BJ130及烟台YT130等汽车,都装有电磁操纵强制啮合式起动机及起动继电器,所以起动电路较复杂,故障也较多。下面介绍两种常见故障的原因及检查方法。     

灯系设备故障的诊断

1.所有的灯都不亮 如果拉动总灯开关,所有的灯都不亮,说明灯系电路的火线中发生断路.判断时,可先按一下喇叭,若喇叭不响,则说明蓄电池到保险盒这一段电路有断路处或保险盒有故障;若喇叭响,说明蓄电池到保险盒这段电路以及保险盒均良好,则是保险盒到电流表到总灯开关这一段电路中有故障.