The Convergence Rates of Improveed Kernel Estimators for Regression Function

The kernel function of kernel estimator for regression function is often defined with compact support, the moment of Y is bigger than one. The convergence rate of the improved kernel estimator is discussed under the improved kernel function. The result is also discussed under random censorship. The class of applicable kernels include those having unbounded support and even not integral .The condition of moment of Y is discarded under the improved kernel estimator. The results are wholly the same as usual and generalize the relative results of the paper .     

玉米自交系及杂交种抗青枯病鉴定

1986-1989年采用自然鉴定和人工土壤接种鉴定的方法，对602份玉米材料的青枯病抗性进行了鉴定。人工接种鉴定397份，其中204份材料表现抗病。在正常年份，人工接种鉴定效果明显好于自然鉴定，但在重病区或青枯病流行年份，在尚未具备人工接种条件时，利用自然发病作为选育抗病材料仍有一定效果。玉米苗期接种青枯病重于成株期     

莲籽壳仁分离与清选机械设计

目前,莲籽的加工是先切壳、穿芯,再进行分离与清选。由于壳与仁之间的间隙较小(0.1～0.2mm),莲籽穿芯、切壳后,多数壳、仁仍为一体,人工分离与清选难度加大,效率也很低下。为此,设计了莲籽壳仁分离与清选机械,将振动分离、揉搓分离、抛掷分离与气流分离有序结合,实施莲籽混合物中莲芯、碎壳和莲仁的分离与清选;介绍了莲籽壳仁分离与清选机械的主要结构和特点;分析了其工作原理和运动特性;确定了该机械的主要技术参数和经济指标。     

果园营养诊断配方施肥对琯溪蜜柚及桃产量品质的影响初探

通过土、叶样营养元素分析,土样营养元素以有效Ca含量最高,其依次顺序为：有效Ca>有效Mg>有效K>有效N>有效Fe>有效P>有效Cu>有效Zn,有效P、有效Cu、有效Zn缺乏;叶片营养元素与适量标准相比较,琯溪蜜柚叶片养分含量,有效Zn严重缺乏,有效Cu、有效P、有效Mg、有效K、有效Ca和有效Fe都处于低量范围内,有效N、有效Ca和有效Fe处于高量;桃叶片养分含量与适量标准相比较,有效Ca严重缺乏,有效N处于高量,有效K在适量范围内,其它处于低量范围内;结果表明,初步推算的琯溪蜜柚和血桃试验园的配方施肥量,均能显著提高果实产量。琯溪蜜柚试验园与对照园相比,平均亩产增加 36.15%,固酸比提高4.26%,糖酸比提高18.03%;血桃试验园与对照园相比,平均亩产增加 37.67%,总糖、总酸、Vc、固形物、可食率含量与对照相比分别提高了6.10%、6.90%、34.55%、9.28%、2.10%。     

碧香无核葡萄在浙江遂昌的引种表现及栽培技术

2011年引入碧香无核葡萄在浙江遂昌县种植,采用水平棚架避雨栽培,该品种长势中庸、抗病、质优、丰产,综合性状表现优良,可作为早熟鲜食葡萄品种在该区域和类似地区进行推广。     

基于平衡策略的支持向量机在电力系统中期负荷预测的应用

针对电力负荷中期预测比较困难并且存在较大误差的问题,提出了基于径向基核函数与基于平衡策略的Sequential minimal optimization(SMO)改进算法相结合的负荷中期预测方法,结合EUNITE网络提供的实际数据,研究了日最大负荷的前后期关系、日最大负荷与节假日的关系和当日与对应星期数的相关性,建立了相应的电力负荷中期预测模型。并对预测结果进行了分析。算例表明,该算法具有运算速度快、精度较高的优点。     

基于Micro-CT的玉米籽粒显微表型特征研究

植物显微表型主要是指植物组织、细胞和亚细胞水平的表型信息,是植物表型组学研究的重要组成部分.针对传统籽粒显微性状检测方法效率低、误差大且指标单一等问题,本研究利用Micro-CT扫描技术对5种类型11个品种玉米籽粒开展显微表型精准鉴定研究.基于对CT序列图像的处理解析,共获取籽粒、胚、胚乳、空腔、皮下空腔、胚乳空腔和胚...     

果树木屑黑木耳袋栽基质研究

黑木耳产业对栎木资源的依赖是该产业发展和生态文明建设不相适应的突出表现,因而选取果树替代传统栎木是促进黑木耳产业绿色生态发展的潜在途径。本文选取苹果树木屑、桃树木屑、桔树木屑和核桃树木屑为黑木耳主要栽培基质,通过菌丝生长速度、菌丝密度、菌丝色泽以及锁状联合数目等指标考核最佳果木木屑袋栽基质。结果表明,黑木耳菌丝在桃树木屑袋料基质上生长最好,生长速度（5.62 mm/d）比对照组（5.24 mm/d）提高了7.25%;菌丝生长势较好,边缘整齐、浓密、色泽洁白且锁状联合数目较多;选取78%、82%、86%和90%等4个不同桃树木屑配比,通过不同袋料基质对桃树木屑黑木耳袋栽基质进行优化研究,最佳果木黑木耳袋栽基质配方为：桃树木屑78%、米糠19%、红糖1.5%、石膏粉1%、石灰粉0.5%,此时黑木耳菌丝的生长速度(10.06 mm/d)比对照组的生长速度(5.88 mm/d)提高了71.09%,且锁状联合数目最多。本研究结果表明,桃树可替代栎木进行黑木耳袋料栽培,为黑木耳产业的绿色高质量发展奠定基础。     

桃叶片再生不定芽的研究

以桃栽培品种曙光、金童5号和甜桃王试管苗叶片为外植体,研究了基本培养基、植物生长调节剂种类及质量浓度组合、基因型和试管苗继代次数等因素对叶片再生的影响。结果表明,适宜暗培养的培养基为LP+1.5mg·L-1TDZ+0.15mg·L-1NAA;光培养基为LP+0.5mg·L-1TDZ+0.3mg·L-1KT+0.3mg·L-1NAA和LP+0.6mg·L-1TDZ+0.3mg·L-1KT+0.4mg·L-12,4-D;金童5号和曙光具有较强的再生能力,再生率分别为21.8%和14.5%;曙光和金童5号试管苗继代第1～11次叶片的再生能力与继代前3次愈伤组织相比形成率较高;曙光再生苗在培养基1/2MS+0.5mg·L-1NAA上生根率为100%,平均生根条数为7.9。     

Crop structure in winter oats and the effect of nitrogen on quality-related characters

The relationship between panicle structure and oat grain quality characteristics was examined in a winter oat (Avena sativa) experiment, cv. Gerald, fertilized with 80 and 200 kg/ha N. Spikelets on each whorl were counted and separated into primary, secondary, and tertiary grains, which were counted and weighed, and the kernels extracted manually and weighed. Tiller and whorl rank had relatively small effects on weight per grain and kernel content. Nitrogen application significantly increased weight per primary and secondary grain on the main stem and T1, the first tiller, while spikelet and grain numbers increased only on T1. However, weight per grain and kernel contents in all whorls on both the main stem and T1 were not significantly affected by nitrogen. Although kernel contents were significantly affected by nitrogen application on some occasions, increases and decreases were less than 2.5%. Across the whole plant, numbers of primary and secondary grains increased at the higher nitrogen application, but weight per primary grain and kernel contents were unaffected. However, weight per secondary grain significantly increased at the higher nitrogen application, thus improving uniformity of grain size which is of value to millers.